Search Your location/language Germany, English
Tilt foot bar, tilt feet

Tilt foot bar, tilt feet

  • Tilt and swivel carry handle bars made of plastic and diecast zinc. With matching anodised aluminium profile, cut to the correct width for your enclosure, and supplied as a separate component.
  • For small plastic enclosures we also offer a range of tilt foot bars which can be fitted anywhere on the base, and provide an ergonomic reading angle.
  • Browse Full List
  • Catalogue Documents
A0350007 Tilt foot

A0350007

Tilt foot The tilt foot is used for canting the unit. It can be locked into the case bottom and is retractable.

Supply 1 tilt foot

Close

A0350007

Tilt foot ABS (UL 94 HB)
off-white RAL 9002
A9152057 Tilt foot bar

A9152057

Tilt foot bar Facilitates ergonomical reading angles, side lenght 40 mm. Assembly oriented towards the length or width (size S towards the length only). Two mounting holes diameter 4.2 mm necessary.

Supply 1 tilt foot bar, assembly kit

Close

A9152057

Tilt foot bar ABS (UL 94 HB)
off-white RAL 9002
A9152058 Tilt foot bar

A9152058

Tilt foot bar Facilitates ergonomical reading angles, side lenght 40 mm. Assembly oriented towards the length or width (size S towards the length only). Two mounting holes diameter 4.2 mm necessary.

Supply 1 tilt foot bar, assembly kit

Close

A9152058

Tilt foot bar ABS (UL 94 HB)
lava
A9152059 Tilt foot bar

A9152059

Tilt foot bar Facilitates ergonomical reading angles, side lenght 40 mm. Assembly oriented towards the length or width (size S towards the length only). Two mounting holes diameter 4.2 mm necessary.

Supply 1 tilt foot bar, assembly kit

Close

A9152059

Tilt foot bar ABS (UL 94 HB)
black RAL 9005
A9207150 Rubber feet 6.5 x 2 mm

A9207150

Rubber feet 6.5 x 2 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

Close

A9207150

Rubber feet 6.5 x 2 mm transparent
A9209229 Anti-slide feet 8.5 x 2.2 mm

A9209229

Anti-slide feet 8.5 x 2.2 mm For SMART-TERMINAL enclosures fitted with the aluminium end plates.
These self-adhesive rubber feet ensure stable positioning and/or make sure the enclosure does not slip.
4 rubber feet required per enclosure.

Supply 2 rubber feet

Close

A9209229

Anti-slide feet 8.5 x 2.2 mm black
A9210290 Rubber feet 9.5 x 3.8 mm

A9210290

Rubber feet 9.5 x 3.8 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

Close

A9210290

Rubber feet 9.5 x 3.8 mm transparent
A9212330 Rubber feet 12 x 3.5 mm

A9212330

Rubber feet 12 x 3.5 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

Close

A9212330

Rubber feet 12 x 3.5 mm transparent
A9250807 Tilt foot bar

A9250807

Tilt foot bar Facilitates ergonomical reading angles, side lenght 81 mm (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a better grip.

Supply 1 tilt foot bar, assembly kit

Close

A9250807

Tilt foot bar ABS (UL 94 HB)
off-white RAL 9002
A9250809 Tilt foot bar

A9250809

Tilt foot bar Facilitates ergonomical reading angles, side lenght 81 mm (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a better grip.

Supply 1 tilt foot bar, assembly kit

Close

A9250809

Tilt foot bar ABS (UL 94 HB)
black RAL 9005
A9250817 Tilt foot bar

A9250817

Tilt foot bar Facilitates ergonomical reading angles, side lenght 43 mm (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a better grip.

Supply 1 tilt foot bar, assembly kit

Close

A9250817

Tilt foot bar ABS (UL 94 HB)
off-white RAL 9002
A9250819 Tilt foot bar

A9250819

Tilt foot bar Facilitates ergonomical reading angles, side lenght 43 mm (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a better grip.

Supply 1 tilt foot bar, assembly kit

Close

A9250819

Tilt foot bar ABS (UL 94 HB)
black RAL 9005
A9257105 Case feet, Vers. I

A9257105

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 4 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257105

Case feet, Vers. I ABS (UL 94 HB)
light grey RAL 7035
A9257107 Case feet, Vers. I

A9257107

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 4 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257107

Case feet, Vers. I ABS (UL 94 HB)
off-white RAL 9002
A9257109 Case feet, Vers. I

A9257109

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 4 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257109

Case feet, Vers. I ABS (UL 94 HB)
black RAL 9005
A9257205 Case feet, Vers. II

A9257205

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 4 mm wall thickness.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257205

Case feet, Vers. II ABS (UL 94 HB)
light grey RAL 7035
A9257207 Case feet, Vers. II

A9257207

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 4 mm wall thickness.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257207

Case feet, Vers. II ABS (UL 94 HB)
off-white RAL 9002
A9257209 Case feet, Vers. II

A9257209

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 4 mm wall thickness.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257209

Case feet, Vers. II ABS (UL 94 HB)
black RAL 9005
A9257404 Case feet, Vers. I

A9257404

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257404

Case feet, Vers. I ABS (UL 94 HB)
anthracite grey RAL 7016
⌀30x12mm
A9257405 Case feet, Vers. I

A9257405

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257405

Case feet, Vers. I ABS (UL 94 HB)
light grey RAL 7035
⌀30x12mm
A9257407 Case feet, Vers. I

A9257407

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257407

Case feet, Vers. I ABS (UL 94 HB)
off-white RAL 9002
⌀30x12mm
A9257409 Case feet, Vers. I

A9257409

Case feet, Vers. I Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness.

Version Without tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 4 self-tapping screws

Close

A9257409

Case feet, Vers. I ABS (UL 94 HB)
black RAL 9005
⌀30x12mm
A9257504 Case feet, Vers. II

A9257504

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness. The tilt legs provide an ergonomic reading angle of the unit. It simply snaps into the feet section and is retractable.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257504

Case feet, Vers. II ABS (UL 94 HB)
anthracite grey RAL 7016
⌀30x12mm
A9257505 Case feet, Vers. II

A9257505

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness. The tilt legs provide an ergonomic reading angle of the unit. It simply snaps into the feet section and is retractable.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257505

Case feet, Vers. II ABS (UL 94 HB)
light grey RAL 7035
⌀30x12mm
A9257507 Case feet, Vers. II

A9257507

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness. The tilt legs provide an ergonomic reading angle of the unit. It simply snaps into the feet section and is retractable.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257507

Case feet, Vers. II ABS (UL 94 HB)
off-white RAL 9002
⌀30x12mm
A9257509 Case feet, Vers. II

A9257509

Case feet, Vers. II Universal case feet for all types of plastic and metal enclosures with max. 3 mm wall thickness. The tilt legs provide an ergonomic reading angle of the unit. It simply snaps into the feet section and is retractable.

Version With tilt legs

Supply 4 foot mouldings, 4 rubber inserts, 2 tilt legs, 4 self-tapping screws

Close

A9257509

Case feet, Vers. II ABS (UL 94 HB)
black RAL 9005
⌀30x12mm