In-Box
Tough enclosures for industrial electronics or electrical terminals and assemblies
Your selection is shown below.
C7008011
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
84x82x55mm
IP 66,
IP 67,
IK 07
C7008021
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
84x82x85mm
IP 66,
IP 67,
IK 07
C7012011
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
122x82x55mm
IP 66,
IP 67,
IK 07
C7012021
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
122x82x85mm
IP 66,
IP 67,
IK 07
C7013031
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
124x122x55mm
IP 66,
IP 67,
IK 07
C7013051
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
124x122x85mm
IP 66,
IP 67,
IK 07
C7016011
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
162x82x55mm
IP 66,
IP 67,
IK 07
C7016021
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
162x82x85mm
IP 66,
IP 67,
IK 07
C7016061
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
162x122x90mm
IP 66,
IP 67,
IK 07
C7020041
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
202x122x75mm
IP 66,
IP 67,
IK 07
C7020061
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
202x122x90mm
IP 66,
IP 67,
IK 07
C7021071
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
202x152x90mm
IP 66,
IP 67,
IK 07
C7025081
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
252x162x90mm
IP 66,
IP 67,
IK 07
C7025091
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
252x162x120mm
IP 66,
IP 67,
IK 07
C7030101
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
302x232x90mm
IP 66,
IP 67,
IK 07
C7030111
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply
1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
Close
IN-BOX
product added to your list
ABS
(UL 94 HB)
light grey RAL 7035
302x232x110mm
IP 66,
IP 67,
IK 07
Accessory "protection"
C2306917
Pressure equalisation element M6x0.75
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure > 6 bar.
Temperature range -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply
1 pressure equalisation element, 1 seal washer, 1 nut
Close
Pressure equalisation element M6x0.75
product added to your list
PA 6
(UL 94 HB)
light grey RAL 7035
IP 56
C2310917
Pressure equalisation element M10x1
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure > 6 bar.
Temperature range -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply
1 pressure equalisation element, 1 seal washer, 1 nut
Close
Pressure equalisation element M10x1
product added to your list
PA 6
(UL 94 HB)
light grey RAL 7035
IP 56
C2320137
Cable grommet
Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 1 - 4 mm and for cable diameters from 8 - 13 mm. Operating temperatures from -40°C to +100°C. Borehole ø 20.5 mm.
Supply
1 cable grommet
Close
Cable grommet
product added to your list
EPDM
light grey RAL 7035
IP 67
C2325147
Cable grommet
Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 0.5 - 3.5 mm and for cable diameters from 8 - 17 mm. Operating temperatures from -40°C to +100°C. Borehole ø 25.5 mm.
Supply
1 cable grommet
Close
Cable grommet
product added to your list
TPE
light grey RAL 7035
IP 67
C7100128
Security kit
To secure the enclosure against unauthorised access.
Supply
1 security kit
Close
Security kit
product added to your list
PP
C7100138
Security kit
To secure the enclosure against unauthorised access.
Supply
1 security kit
Close
Security kit
product added to your list
PP
Accessory "wall/holder"
C7100092
Wall-mounting brackets
Wall-mounting brackets made of plastic for external wall mounting. Installation above, below or laterally, as required.
Supply
4 wall-mounting brackets incl. fasteners
Close
Wall-mounting brackets
product added to your list
PC GF15
C7100142
Inside hinge
For converting the top part of the enclosure into a folding door.
Supply
2 hinges, fastening screws with drill template
Close
Inside hinge
product added to your list
PC
Accessory "screws"
C7100167
Screw 3.9 x 9 mm
For fitting standard DIN rails, mounting plates, PCBs, components etc.
Supply
1 self-tapping screw
Close
Screw 3.9 x 9 mm
product added to your list
Accessory
C7110056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
73x53x2.5mm
C7110077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
66x35x7.5mm
C7110087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
66x15x5.5mm
C7111056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
91x73x2.5mm
C7111077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
104x35x7.5mm
C7111087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
104x15x5.5mm
C7112056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
113x93x2.5mm
C7112077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
108x35x7.5mm
C7112087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
108x15x5.5mm
C7113056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
131x73x2.5mm
C7113077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
144x35x7.5mm
C7113087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
144x15x5.5mm
C7114056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
131x113x2.5mm
C7115056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
171x113x2.5mm
C7115077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
184x35x7.5mm
C7115087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
184x15x5.5mm
C7116056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
171x143x2.5mm
C7116077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
168x35x7.5mm
C7116087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
168x15x5.5mm
C7117056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
220.5x152.5x2.5mm
C7117077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
220x35x7.5mm
C7117087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
220x15x5.5mm
C7118056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply
1 mounting plate
Close
Mounting plate
product added to your list
270.5x222.5x2.5mm
C7118077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 35
Close
Standard DIN rail, Type TH 35
product added to your list
Steel
283.5x35x7.5mm
C7118087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply
1 standard DIN rail TH 15
Close
Standard DIN rail, Type TH 15
product added to your list
Steel
283.5x15x5.5mm