Accesorios para cajas
Datec-Control
Caja de mano para dispalys de gran tamaño
Las cajas ergonómicas DATEC-CONTROL tiene una amplia sección frontal que facilita la incorporación de módulos displays más grandes y con más capacidad gráfica para mayor comodidad del usuario.
- Incorporación de visores gráficos y LCDs estandarizados.
- Especialmente fácil de usar gracias a la empuñadura estrecha.
- Elevada categoría de protección: IP 65 (XS, S) o IP 54 (M, L) al utilizar los kits de juntas de sellado junto con los protectores de pantalla.
- 4 tamaños, cada uno en 2 colores:
- DATEC-CONTROL XS
con/sin compartimiento para pilas atornillado 2 x AA / 3 x AA / 1 x 9 V; tapa del compartimiento para pilas enclaustrable o atornillable de forma opcional; base para aplicaciones de sobremesa. - DATEC-CONTROL S
con/sin compartimiento para pilas atornillado 4 x AA / 1 x 9 V; tapa del compartimiento para pilas enclaustrable o atornillable de forma opcional; base para aplicaciones de sobremesa. - DATEC-CONTROL M, L
con/sin compartimiento para pilas intercambiable de hasta 5 x AA; espacio para tarjetas PCMCIA; base para sobremesa o montaje a pared con toma de carga y/o transmisión de datos. - Transmisión de datos y recarga sencilla, base y contactos disponibles como accesorios.
- Juego de soporte de pared para almacenamiento seguro (accesorio).
- Los protectores absorben los golpes y protegen las superficies (accesorio); tamaños M y L con bandolera adicional.
- Panel de control rebajado para proteger el teclado de membrana.
- Cabezales de fijación para placas de circuito impreso y piezas de montaje.
Application Fields
Recopilación y transmisión móvil de datos a través de módem, ISDN o infrarrojos, tecnologías de medición y regulación, tecnologías de control digital, construcción de maquinaria e instalaciones, smart factory, industrie 4.0, ecc.
Seleccione la versión, el tamaño o los tamaños que desee o haga clic en el botón “Seleccionar todos los productos” al final de la lista de productos.
A9100002
Ring eyelet
For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.
Supply 1 ring eyelet
A9100002
Ring eyeletProducto añadido a su lista
volcano
A9160003
Plug-in contact, 1 x 9 V (PP3)
Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).
Application: for a 9 V flat battery (PP3).
Supply 1 plug-in contact
A9160003
Plug-in contact, 1 x 9 V (PP3)Producto añadido a su lista
A9174006
Set of battery clips, 1 x 9 V
For contacting the battery.
Supply 2 single contacts
A9174006
Set of battery clips, 1 x 9 VProducto añadido a su lista
tin-plated
A9176001
Display window XS
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply 1 display window, 1 adhesive foil
A9176001
Display window XSProducto añadido a su lista
clear
A9176006
Sealing kit XS
Application: for increasing the protection class, of DATEC-CONTROL XS.
Supply 1 sealing kit
A9176006
Sealing kit XSProducto añadido a su lista
A9176007
Set of battery clips, 2 x AA
For contacting the batteries. For secure hold of the round cells just glue the attached battery spacer into the enclosure’s battery compartment lid.
Supply 2 single contacts, 1 double contacts, 1 self-adhesive battery spacer
A9176007
Set of battery clips, 2 x AAProducto añadido a su lista
nickel-plated
A9176008
Set of battery clips, 3 x AA
For contacting the batteries. For secure hold of the round cells just glue the attached battery spacer into the enclosure’s battery compartment lid.
Supply 1 set incl. 1 self-adhesive battery spacer
A9176008
Set of battery clips, 3 x AAProducto añadido a su lista
nickel-plated
A9176108
Protector XS
Special protector for DATEC-CONTROL XS. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Supply 1 protector
A9176108
Protector XSProducto añadido a su lista
volcano
A9176128
Battery compartment XS, 2 x AA or 1 x 9V
Suitable for DATEC-CONTROL XS. An add-on battery compartment for 2 x 1.5 V mignon-cells (AA) or 1 x 9 V flat battery (PP3). It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).
Supply 1 battery compartment
A9176128
Battery compartment XS, 2 x AA or 1 x 9VProducto añadido a su lista
A9176137
Station XS
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9176137
Station XSProducto añadido a su lista
off-white RAL 9002
A9176139
Station XS
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9176139
Station XSProducto añadido a su lista
black RAL 9005
A9176158
Battery compartment XS, 3 x AA
Suitable for DATEC-CONTROL XS. An add-on battery compartment for 3 x 1.5 V AA batteries (IEC LR6 1.5 V). It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).
Supply 1 battery compartment
A9176158
Battery compartment XS, 3 x AAProducto añadido a su lista
off-white RAL 9002
A9177001
Display window S
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply 1 display window, 1 adhesive foil
A9177001
Display window SProducto añadido a su lista
clear
A9177006
Sealing kit S
Application: for increasing the protection class, of DATEC-CONTROL S.
Supply 1 sealing kit
A9177006
Sealing kit SProducto añadido a su lista
A9177008
Protector S
Special protector for DATEC-CONTROL S. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Supply 1 protector
A9177008
Protector SProducto añadido a su lista
volcano
A9177137
Station S
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9177137
Station SProducto añadido a su lista
off-white RAL 9002
A9177139
Station S
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9177139
Station SProducto añadido a su lista
black RAL 9005
A9177310
Battery compartment, 1 x 9 V
Application: for 1 x 9 V flat battery (PP3).
Supply 1 battery compartment, assembly kit
A9177310
Battery compartment, 1 x 9 VProducto añadido a su lista
A9178001
Display window M
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply 1 display window, 1 adhesive foil
A9178001
Display window MProducto añadido a su lista
clear
A9178006
Sealing kit M
Application: for increasing the protection class, of DATEC-CONTROL M.
Supply 1 sealing kit
A9178006
Sealing kit MProducto añadido a su lista
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178007
Contacts, maleProducto añadido a su lista
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178008
Contacts, femaleProducto añadido a su lista
A9178108
Protector M
Special protector for DATEC-CONTROL M. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version without hanging belt.
Supply 1 protector
A9178108
Protector MProducto añadido a su lista
volcano
A9178118
Battery compartment holder
Enables the mounting of a battery compartment in the station and case. For mounting the battery compartment holder there are two positions possible-according to local requirements and configuration of components.
Supply 1 battery compartment holder, set of battery clips for connection to versions I and II battery compartment, 2 fixing screws
A9178118
Battery compartment holderProducto añadido a su lista
volcano
A9178128
Battery compartment, M/L, 4 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version For 4 mignon cells 1.5 V (AA)
Supply 1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
A9178128
Battery compartment, M/L, 4 x AAProducto añadido a su lista
volcano
A9178137
Station, Vers. I
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9178137
Station, Vers. IProducto añadido a su lista
off-white RAL 9002
A9178139
Station, Vers. I
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9178139
Station, Vers. IProducto añadido a su lista
black RAL 9005
A9178158
Battery compartment, M/L, 5 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version For 5 mignon cells 1.5 V (AA)
Supply 1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
A9178158
Battery compartment, M/L, 5 x AAProducto añadido a su lista
volcano
A9178167
Station, Vers. II
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version Wall-mounting
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, locking mechanism
A9178167
Station, Vers. IIProducto añadido a su lista
off-white RAL 9002
A9178169
Station, Vers. II
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version Wall-mounting
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, locking mechanism
A9178169
Station, Vers. IIProducto añadido a su lista
black RAL 9005
A9178178
End plate for electronic area, Vers. I
Simply inserted into the guides in the bottom part.
Version To close the electronic area
Supply 1 end plate for electronic area
A9178178
End plate for electronic area, Vers. IProducto añadido a su lista
volcano
A9178188
End plate for electronic area, Vers. II
Simply inserted into the guides in the bottom part.
Version For use with a PCMCIA-card type I
Supply 1 end plate for electronic area
A9178188
End plate for electronic area, Vers. IIProducto añadido a su lista
volcano
A9178198
End plate for electronic area, Vers. III
Simply inserted into the guides in the bottom part.
Version For use with a PCMCIA-card type I
Supply 1 end plate for electronic area
A9178198
End plate for electronic area, Vers. IIIProducto añadido a su lista
volcano
A9178208
Protector M
Special protector for DATEC-CONTROL M. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version With shoulder strap (approx. 1800 x 20 mm, black, with push-in buckle)
Supply 1 protector, 1 shoulder strap
A9178208
Protector MProducto añadido a su lista
volcano
A9179001
Display window L
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply 1 display window, 1 adhesive foil
A9179001
Display window LProducto añadido a su lista
clear
A9179006
Sealing kit L
Application: for increasing the protection class, of DATEC-CONTROL L.
Supply 1 sealing kit
A9179006
Sealing kit LProducto añadido a su lista
A9179108
Protector L
Special protector for DATEC-CONTROL L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version without hanging belt.
Supply 1 protector
A9179108
Protector LProducto añadido a su lista
volcano
A9179208
Protector L
Special protector for DATEC-CONTROL L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version with shoulder strap (approx. 1800 x 20 mm, black, with push-in buckle).
Supply 1 protector, 1 shoulder strap
A9179208
Protector LProducto añadido a su lista
volcano
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply 1 strain relief device, 2 screws
A9199005
Strain reliefProducto añadido a su lista
volcano
A9226117
Wall suspension element
Two claps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226117
Wall suspension elementProducto añadido a su lista
off-white RAL 9002
A9226119
Wall suspension element
Two claps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226119
Wall suspension elementProducto añadido a su lista
black RAL 9005
A9226227
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226227
Wall suspension elementProducto añadido a su lista
off-white RAL 9002
A9226229
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226229
Wall suspension elementProducto añadido a su lista
black RAL 9005
A9226337
Wall suspension element
Wall suspension element for DATEC-CONTROL XS. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226337
Wall suspension elementProducto añadido a su lista
off-white RAL 9002
A9226339
Wall suspension element
Wall suspension element for DATEC-CONTROL XS. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226339
Wall suspension elementProducto añadido a su lista
black RAL 9005
A9250250
Battery spacer
The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Supply 1 spacer
A9250250
Battery spacerProducto añadido a su lista
50x25x4mm
A9345217
Set of battery compartment, 4 x AA
For 4 x 1.5 V mignon-cells (AA). Complies with DIN EN 60601 (short circuit caused by incorrect insertion of batteries impossible).
Supply 1 battery compartment, battery clips nickel-plated, assembly kit
A9345217
Set of battery compartment, 4 x AAProducto añadido a su lista
off-white RAL 9002
Opciones de productos para Datec-Control
¿Qué necesita en su producto personalizado? En caso necesario, le suministramos las cajas y botones giratorios listas para el montaje con todas las modificaciones y acabados precisos.
