Búsqueda Your location/language Germany, Español
CARRYTEC

Carrytec

Cajas de plástico con asa integrada

CARRYTEC es única al tener un asa integrada versátil y funcional para cualquier uso y situación en exteriores e interiores.

  • Asa con almohadilla antideslizante integrada para un perfecto agarre.
  • CARRYTEC M en versión fina para el montaje de tabletas o similares.
  • Asa estratégicamente situada en el centro de gravedad para un transporte y uso equilibrado.
  • Opción de integrar clip en el panel trasero para montaje en trípodes o brazos portantes, para un rápido posicionamiento y orientación de las pantallas y paneles operativos, y un buen ordenamiento del cableado, permitiendo una optima utilización.
  • Superficie especialmente grande y muy útil para interfaces de usuario (S: 8,4"/21 cm; M: 10,4"/26 cm; L: 13,4"/34 cm).
  • Gran profundidad de instalación y amplio espacio para interfaces a pesar de su apariencia delgada.
  • Protección de las interfaces gracias a su área rebajada interior.
  • Almacenamiento seguro en soporte de sobremesa o de pared; transmisión de datos y recarga sencilla; contactos como accesorios (excepto en la versión fina).
  • Pinza de sujeción para colgar de tubos redondos o raíles según norma DIN EN ISO 19054.
  • Disponible en plástico resistente a impactos, y en colores oscuros, para su uso en ambientes exigentes tanto en interior como en exterior.
  • Sellado de protección IP 54 (accesorio).
  • Panel de control rebajado para proteger el teclado de membrana.
  • De fácil limpieza.
  • Compartimiento para 5 pilas AA opcional (necesaria adaptación).
  • Bolsas de protección para guardar instrumentos, sondas, sensores, cables, accesorios, etc. (tamaños S y M).
  • Cabezales de fijación para placas de circuito impreso y piezas de montaje internos.
  • Video
  • Ejemplos de aplicación

Application fields

  • Extraordinaria variedad de aplicaciones: Manual – Sobremesa – Pared – Raíles – Tubos – Trípodes – Brazos portantes.
  • Dependiendo de la utilización (interiores / exteriores), esta innovadora carcasa se emplea en diferentes materiales, como plástico resistente a los golpes, tonos coordinados y posibilidades de combinación.
  • Versiones
  • Accesorios
  • Modificaciones específicas del cliente

Seleccione la versión y el tamaño y haga clic en "Seleccionar".

 

Versión plana

CARRYTEC versión plana

Versión estándar

CARRYTEC versión estándar

A0325080 Self-tapping screws 2.5 x 8 mm (PZ1)

A0325080

Self-tapping screws 2.5 x 8 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.
For correct assembly please note the tightening torque depends on enclosure type. View list (.xls) >>

Supply 1 self-tapping screw

Cerrar

A0325080

Self-tapping screws 2.5 x 8 mm (PZ1)
Producto añadido a su lista
A0399T10 Torx T10 screwdriver

A0399T10

Torx T10 screwdriver Screwdriver with ergonomic handle for reliably turning, tightening and loosening Torx T10 type screws. (original can deviate from photo)

Supply 1 screwdriver

Cerrar

A0399T10

Torx T10 screwdriver
Producto añadido a su lista
A9178007 Contacts, male

A9178007

Contacts, male Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.

Supply 1 contact

Cerrar

A9178007

Contacts, male
Producto añadido a su lista
gold-plated
A9178008 Contacts, female

A9178008

Contacts, female Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.

Supply 1 contact

Cerrar

A9178008

Contacts, female
Producto añadido a su lista
gold-plated
A9193042 Mounting plates for contacts

A9193042

Mounting plates for contacts Universal accessories that simplify the assembly of contacts for transferring data and charging current between enclosures and stations. Available as a kit consisting of two plastic mounting plates for holding the 6-pin contacts which are available as accessories ("female" contact for the enclosure and "male" contact for the station).
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station. The mounting plates can be installed first in the enclosure and station, and the contacts (accessories) at a later point in time.

Supply 2 mounting plates

Cerrar

A9193042

Mounting plates for contacts
Producto añadido a su lista
ABS (UL 94 HB)
black RAL 9005
A9193044 Contacting kit, 6-pin

A9193044

Contacting kit, 6-pin Universal accessory consisting of mounting plates and 6-pin contacts. Simplifies the assembly of contacts for transferring data and charging current between enclosures and stations. The "female" and "male" contacts are already permanently glued in the corresponding mounting plate. The contact pins are freely accessible for soldering work.
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station ("female" contact for the enclosure and "male" contact for the station).

Supply 2 mounting plates, 2 6-pin contacts ("female" and "male")

Cerrar

A9193044

Contacting kit, 6-pin
Producto añadido a su lista
ABS (UL 94 HB)
black RAL 9005
A9338117 Battery compartment kit, 5 x AA

A9338117

Battery compartment kit, 5 x AA For direct installation in front panels or case walls. Easy battery replacement. Battery compartment lid for snap-in and/or screw-on mounting.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.

Supply 1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws

Cerrar

A9338117

Battery compartment kit, 5 x AA
Producto añadido a su lista
ABS (UL 94 HB)
off-white RAL 9002
93x98mm
IP 54
A9338218 Battery compartment kit, 5 x AA

A9338218

Battery compartment kit, 5 x AA For direct installation in front panels or case walls. Easy battery replacement. Battery compartment lid for snap-in and/or screw-on mounting.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.

Supply 1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws

Cerrar

A9338218

Battery compartment kit, 5 x AA
Producto añadido a su lista
ASA+PC-FR (UL 94 V-0)
lava
93x98mm
IP 54
B4308001 Sealing S

B4308001

Sealing S For raising the protection class IP 54 of the CARRYTEC S. Bottom part with groove to assemble the sealing.

Supply 1 sealing

Cerrar

B4308001

Sealing S
Producto añadido a su lista
B4308117 Station S/M

B4308117

Station S/M For secure storage of the enclosure. Can be used on table stand and/or wall suspension element. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.

Supply 1 base, assembly kit

Cerrar

B4308117

Station S/M
Producto añadido a su lista
ABS (UL 94 HB)
off-white RAL 9002
B4308127 Base plate for station

B4308127

Base plate for station Recommended for table-top applications. The rubber feet included in the supply ensure that the table-top version does not slip.

Supply 1 base plate, 4 rubber feet, assembly kit

Cerrar

B4308127

Base plate for station
Producto añadido a su lista
ABS (UL 94 HB)
off-white RAL 9002
B4308218 Station S/M

B4308218

Station S/M For secure storage of the enclosure. Can be used on table stand and/or wall suspension element. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.

Supply 1 base, assembly kit

Cerrar

B4308218

Station S/M
Producto añadido a su lista
ASA+PC-FR (UL 94 V-0)
lava
B4308228 Base plate for station

B4308228

Base plate for station Recommended for table-top applications. The rubber feet included in the supply ensure that the table-top version does not slip.

Supply 1 base plate, 4 rubber feet, assembly kit

Cerrar

B4308228

Base plate for station
Producto añadido a su lista
ASA+PC-FR (UL 94 V-0)
lava
B4308237 Holding clamps

B4308237

Holding clamps For hanging the enclosure from round tubes Ø 32 mm and standard equipment rails DIN EN ISO 19054 (25 x 10 mm). 2 locating holes Ø 2.4 mm are required. For attachment, 2 stainless steel Torx screws Ø 3 x 8 mm (Torx 10) are included in the set.

Supply 1 holding clamp, assembly kit

Cerrar

B4308237

Holding clamps
Producto añadido a su lista
PA 6
off-white RAL 9002
B4308238 Holding clamps

B4308238

Holding clamps For hanging the enclosure from round tubes Ø 32 mm and standard equipment rails DIN EN ISO 19054 (25 x 10 mm). 2 locating holes Ø 2.4 mm are required. For attachment, 2 stainless steel Torx screws Ø 3 x 8 mm (Torx 10) are included in the set.

Supply 1 holding clamp, assembly kit

Cerrar

B4308238

Holding clamps
Producto añadido a su lista
PA 6
lava
B4308309 Brackets

B4308309

Brackets Universal accessory for mounting a shoulder strap or something equivalent (separate article). Allows comfortable case carrying.
Fixing in 2 mounting holes: hole distance 17.3 mm, ø 6.5 mm. Minimum wall thickness of 3 mm necessary.

Supply 2 brackets, 4 screws and 4 washers

Cerrar

B4308309

Brackets
Producto añadido a su lista
Plastic
black RAL 9005
B4308600 Carrying case S, right-hand side

B4308600

Carrying case S, right-hand side

Specially designed for CARRYTEC S. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).

Version Right-hand side.

Supply 1 carrying case, left-hand side, assembly kit

Cerrar

B4308600

Carrying case S, right-hand side
Producto añadido a su lista
grey
82x180x65mm
B4308610 Carrying case S, left-hand side

B4308610

Carrying case S, left-hand side

Specially designed for CARRYTEC S. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).

Version Left-hand side.

Supply 1 carrying case, left-hand side, assembly kit

Cerrar

B4308610

Carrying case S, left-hand side
Producto añadido a su lista
grey
82x180x65mm
B4308650 Shoulder strap

B4308650

Shoulder strap Practical shoulder strap with shoulder padding.

Supply 1 shoulder strap

Cerrar

B4308650

Shoulder strap
Producto añadido a su lista
grey
1400mm
B4310001 Sealing M

B4310001

Sealing M For raising the protection class IP 54 of the CARRYTEC M.

Supply 1 sealing

Cerrar

B4310001

Sealing M
Producto añadido a su lista
B4310600 Carrying case M, right-hand side

B4310600

Carrying case M, right-hand side

Specially designed for CARRYTEC M. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).

Version Right-hand side.

Supply 1 carrying case, left-hand side, assembly kit

Cerrar

B4310600

Carrying case M, right-hand side
Producto añadido a su lista
grey
99x214x64mm
B4310610 Carrying case M, left-hand side

B4310610

Carrying case M, left-hand side

Specially designed for CARRYTEC M. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).

Version Left-hand side.

Supply 1 carrying case, left-hand side, assembly kit

Cerrar

B4310610

Carrying case M, left-hand side
Producto añadido a su lista
grey
99x214x64mm
B4313001 Sealing L

B4313001

Sealing L For raising the protection class IP 54 of the CARRYTEC L.

Supply 1 sealing

Cerrar

B4313001

Sealing L
Producto añadido a su lista
B4313117 Station L

B4313117

Station L For secure storage of the enclosure. Can be used on table stand or as wall suspension element. By using it as a wall suspension element the adapter (accessories) is needed. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.

Supply 1 base, assembly kit

Cerrar

B4313117

Station L
Producto añadido a su lista
ABS (UL 94 HB)
off-white RAL 9002
B4313147 Adapter for Station L

B4313147

Adapter for Station L Adapter for mounting Station L on a wall. Supplied with two self-tapping screws for attaching Station L.

Supply 1 adapter and 2 self-tapping screws

Cerrar

B4313147

Adapter for Station L
Producto añadido a su lista
ABS (UL 94 HB)
off-white RAL 9002
B4313218 Station L

B4313218

Station L For secure storage of the enclosure. Can be used on table stand or as wall suspension element. By using it as a wall suspension element the adapter (accessories) is needed. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.

Supply 1 base, assembly kit

Cerrar

B4313218

Station L
Producto añadido a su lista
ASA+PC-FR (UL 94 V-0)
lava
B4313248 Adapter for Station L

B4313248

Adapter for Station L Adapter for mounting Station L on a wall. Supplied with two self-tapping screws for attaching Station L.

Supply 1 adapter and 2 self-tapping screws

Cerrar

B4313248

Adapter for Station L
Producto añadido a su lista
ASA+PC-FR (UL 94 V-0)
lava
K0300012 Shoulder strap 330 / 340

K0300012

Shoulder strap 330 / 340 The shoulder strap can be used for carry cases 330 and 340 as well as Carrytec enclosures with separate brackets (B4308309). The upholstered strap is wedge-shaped in order to prevent the strap from slipping off the shoulder, and ensures optimum load distribution. The shoulder strap can easily be adjusted to the size of the user.

Samples free of charge are not available.

Supply 1 shoulder strap

Cerrar

K0300012

Shoulder strap 330 / 340
Producto añadido a su lista
black
1600x55x5mm

Opciones de productos para Carrytec

¿Qué necesita en su producto personalizado? En caso necesario, le suministramos las cajas y botones giratorios listas para el montaje con todas las modificaciones y acabados precisos.