Acessórios para Caixas
Net-Box
Caixa suporte de parede para unidades de controle
A nova NET-BOX com parte superior curvada é moderna e elegante, para unidades de controle com montagem em parede, rede e muito mais.
- três tamanhos com espaço sobressalente para eletrônicos e interfaces
- conectores e cabos estão escondidos sob a tampa frontal
- as caixas são moldadas em material que retarda chamas e pode ser selada com IP 65
- montagem de três partes simples - parte traseira, cobertura dianteira e tampa frontal; não há parafusos visíveis na frente, apenas dois na parte inferior da tampa
- pilares de parafuso são fornecidos na parte inferior para montagem PCB e montagens
- enchimento opcional cobre a abertura inferior e pode ser usada para PCBs ou conjuntos adicionais de montagem
- sistema de montagem em parede através de três pontos - não há necessidade de abrir a seção de produtos eletrônicos principal, apenas a tampa frontal tem que ser recolocada após a instalação (modelos II já equipados com aberturas na parte inferior)
- fornecido com parafusos de montagem Torx T10
- caixas NET-BOX também podem ser usadas como unidades em mesa de trabalho, pés antiderrapantes estão disponíveis como acessório
Application Fields
Gestão de edifício, unidades de controle central, IoT/IIoT, sistemas de aquisição de dados, engenharia de sistemas de dados, tecnologia de medição e controle, terminais de supervisão e controle de acesso, médica e tecnologia de bem-estar, etc.
B3214101
NET-BOX 140, Vers. I
Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material.
Version Bottom part without openings.
Supply 1 bottom part and 1 top cover, 1 lid and 1 assembly kit
B3214101
NET-BOX 140, Vers. IProduto adicionado a sua lista
light grey RAL 7035
140x140x46,5mm
,
B3214201
NET-BOX 140, Vers. II
Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material.
Version Bottom part with openings for concealed three-point wall mounting: 1 keyhole for central mounting and 2 holes to secure the enclosure on the bottom right and left.
Supply 1 bottom part and 1 top cover, 1 lid and 1 assembly kit
B3214201
NET-BOX 140, Vers. IIProduto adicionado a sua lista
light grey RAL 7035
140x140x46,5mm
B3218101
NET-BOX 180, Vers. I
Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material.
Version Bottom part without openings.
Supply 1 bottom part and 1 top cover, 1 lid and 1 assembly kit
B3218101
NET-BOX 180, Vers. IProduto adicionado a sua lista
light grey RAL 7035
180x180x48,5mm
,
B3218201
NET-BOX 180, Vers. II
Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material.
Version Bottom part with openings for concealed three-point wall mounting: 1 keyhole for central mounting and 2 holes to secure the enclosure on the bottom right and left.
Supply 1 bottom part and 1 top cover, 1 lid and 1 assembly kit
B3218201
NET-BOX 180, Vers. IIProduto adicionado a sua lista
light grey RAL 7035
180x180x48,5mm
B3222101
NET-BOX 220, Vers. I
Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material.
Version Bottom part without openings.
Supply 1 bottom part and 1 top cover, 1 lid and 1 assembly kit
B3222101
NET-BOX 220, Vers. IProduto adicionado a sua lista
light grey RAL 7035
220x220x50,5mm
,
B3222201
NET-BOX 220, Vers. II
Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material.
Version Bottom part with openings for concealed three-point wall mounting: 1 keyhole for central mounting and 2 holes to secure the enclosure on the bottom right and left.
Supply 1 bottom part and 1 top cover, 1 lid and 1 assembly kit
B3222201
NET-BOX 220, Vers. IIProduto adicionado a sua lista
light grey RAL 7035
220x220x50,5mm
A0306031
Self-tapping screws 3 x 6 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0306031
Self-tapping screws 3 x 6 mm (PZ1)Produto adicionado a sua lista
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply 2 rubber feet
A9207150
Anti-slide feet 6.5 x 2 mmProduto adicionado a sua lista
A9325018
Pole/mast mounting bracket
For the secure and stable mounting of IP rated electronic enclosures to poles, masts, and pipes using cable ties or stainless steel screw bands, suitable for pole diameters from 30 mm. The bracket is attached to the rear of the enclosure (four drilled holes required) and is manufactured from UV resistant material.
Note:
Every application (environment, sealing requirements, enclosure size/version, mast diameter, etc.) is different. For this reason, no mounting screws, cable ties or stainless steel screw bands are supplied; only the mast/pipe bracket is included. However, on request, we can provide a wide range of solutions tailored precisely to the intended application.
Supply 1 pole/mast mounting bracket
A9325018
Pole/mast mounting bracketProduto adicionado a sua lista
anthracite grey RAL 7016
100x100x20mm
B3314159
Sealing kit 140
Application: for increasing the protection class, of NET-BOX140.
Supply 1 sealing kit
B3314159
Sealing kit 140Produto adicionado a sua lista
black
B3314918
Infill cover 140
With the optional cover you also have the option of fitting a further PCB and visually closing the bottom part of the enclosure.
Supply 1 infill cover
B3314918
Infill cover 140Produto adicionado a sua lista
lava
B3318159
Sealing kit 180
Application: for increasing the protection class, of NET-BOX 180.
Supply 1 sealing kit
B3318159
Sealing kit 180Produto adicionado a sua lista
black
B3318918
Infill cover 180
With the optional cover you also have the option of fitting a further PCB and visually closing the bottom part of the enclosure.
Supply 1 infill cover
B3318918
Infill cover 180Produto adicionado a sua lista
lava
B3322159
Sealing kit 220
Application: for increasing the protection class, of NET-BOX 220.
Supply 1 sealing kit
B3322159
Sealing kit 220Produto adicionado a sua lista
black
B3322918
Infill cover 220
With the optional cover you also have the option of fitting a further PCB and visually closing the bottom part of the enclosure.
Supply 1 infill cover
B3322918
Infill cover 220Produto adicionado a sua lista
lava
Opções para customizadas Net-Box
O que você ainda precisa em seu próprio produto pessoal? Nós podemos fornecer caixas e knobs de ajuste com todas as modificações necessárias para a montagem de seus componentes eletrônicos.
