Accessori per contenitori
Datec-Mobil-Box
Resistenti contenitori per applicazioni mobili
La serie di contenitori denominata DATEC-MOBIL-BOX è stata concepita e sviluppata su misura per il rilevamento mobile di dati.
- Presa e comando sicuri grazie al profilo ergonomico della parte inferiore del contenitore
- Resistente e a tenuta fino al grado di protezione IP 65, guarnizione come accessorio
- Integrazione di LCD standardizzati; le lastre dei display proteggono gli indicatori incorporati e permettono un grado di protezione elevato nell'area di indicazione
- Superfici piane per le interfacce
- 3 misure, 2 colori
- DATEC-MOBIL-BOX S e L con/senza vano batteria
- DATEC-MOBIL-BOX M con vani batteria opzionali, a seconda dei requisiti
- Superficie di comando incavata a protezione della tastiera a membrana
- Punti di fissaggio per schede e componenti di montaggio, formato Eurocard con misura L
- Supporto inclinato, ergonomico per le operazioni di comando (accessorio)
- Set supporto da parete per il deposito sicuro dei contenitori (accessorio)
- Protezione che assorbe gli urti e ripara le superfici (accessorio misura L)
COMMENTI DEL DESIGNER
"La spaziosità della DATEC-MOBIL-BOX ha veramente del prodigioso. Contando anche la linea di prodotti Datec-Pocket-Box avete a disposizione sei misure di contenitori combinabili con i comuni elementi costruttivi in commercio per sfruttare in modo efficiente tutto lo spazio interno. Ciascuno di questi contenitori portatili può essere considerato il non plus ultra dello sfruttamento degli spazi in combinazione con le funzionalità standard di indicazione, superficie di comando, interfacce e alimentazione di energia. In fatto di prodotti compatti e portatili questo design per contenitori non conosce rivali."
Martin Nußberger, polyform Industrie Design
Application Fields
Predestinato per l'impiego in ambienti di lavoro difficili, rilevamento e trasmissione mobile dei dati, metrologia e tecnica di regolazione, logistica di magazzino e di vendita, tecnica di comando digitale, etc.
Scegliete la versione e la misura o le misure desiderate oppure cliccate sul pulsante “Seleziona tutti i prodotti” alla fine della lista dei prodotti.
A0306031
Self-tapping screws 3 x 6 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0306031
Self-tapping screws 3 x 6 mm (PZ1)Prodotto aggiunto alla lista
A0308031
Self-tapping screws 3 x 8 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0308031
Self-tapping screws 3 x 8 mm (PZ1)Prodotto aggiunto alla lista
A0308132
Self-tapping screw 3 x 8 mm (T10)
Self-tapping screw with T10 Torx drive. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0308132
Self-tapping screw 3 x 8 mm (T10)Prodotto aggiunto alla lista
A9100002
Ring eyelet
For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.
Supply 1 ring eyelet
A9100002
Ring eyeletProdotto aggiunto alla lista
volcano
A9160003
Plug-in contact, 1 x 9 V (PP3)
Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).
Application: for a 9 V flat battery (PP3).
Supply 1 plug-in contact
A9160003
Plug-in contact, 1 x 9 V (PP3)Prodotto aggiunto alla lista
A9161002
Set of battery clips, 2 x 9 V or 4 x AA
For contacting the batteries 2 x 9 V.
Note application DATEC-MOBIL-BOX L with battery compartment: only for this enclosure 2 x 9 V or 4 x AA is possible.
Note application DATEC-MOBIL-BOX L with battery compartment: only for this enclosure 2 x 9 V or 4 x AA is possible.
Supply 4 single contacts
A9161002
Set of battery clips, 2 x 9 V or 4 x AAProdotto aggiunto alla lista
tin-plated
A9173001
Sealing kit S
Application: for increasing the protection class, of DATEC-MOBIL-BOX S.
Supply 2 sealings, 4 sealing rings
A9173001
Sealing kit SProdotto aggiunto alla lista
A9173007
Display window S, border off-white
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version II.
Supply 1 display window, 1 adhesive foil
A9173007
Display window S, border off-whiteProdotto aggiunto alla lista
transparent
A9173009
Display window S, border black
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version II.
Supply 1 display window, 1 adhesive foil
A9173009
Display window S, border blackProdotto aggiunto alla lista
transparent
A9173010
9 V contact kit, 1 x 9 V
For 1 x 9 V flat battery (PP3), Offering polarity and torsion protection. Alternative to the traditional plug-in contact.
Supply 1 plug-in contact set
A9173010
9 V contact kit, 1 x 9 VProdotto aggiunto alla lista
A9173307
Display window S, border off-white
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version III.
Supply 1 display window, 1 adhesive foil
A9173307
Display window S, border off-whiteProdotto aggiunto alla lista
transparent
A9173309
Display window S, border black
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version III.
Supply 1 display window, 1 adhesive foil
A9173309
Display window S, border blackProdotto aggiunto alla lista
transparent
A9173407
Display window S, border off-white
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version IV.
Supply 1 display window, 1 adhesive foil
A9173407
Display window S, border off-whiteProdotto aggiunto alla lista
transparent
A9173409
Display window S, border black
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version IV.
Supply 1 display window, 1 adhesive foil
A9173409
Display window S, border blackProdotto aggiunto alla lista
transparent
A9174001
Sealing kit M
Application: for increasing the protection class, of DATEC-MOBIL-BOX M.
Supply 2 sealings, 4 sealing rings
A9174001
Sealing kit MProdotto aggiunto alla lista
A9174002
Battery compartment, 2 x 9 V
Application: for 2 x 9 V flat batteries (PP3).
Supply 1 battery compartment, assembly kit
A9174002
Battery compartment, 2 x 9 VProdotto aggiunto alla lista
off-white RAL 9002
A9174003
Battery compartment, 1 x 9 V
Application: for 1 x 9 V flat battery (PP3).
Supply 1 battery compartment, assembly kit
A9174003
Battery compartment, 1 x 9 VProdotto aggiunto alla lista
off-white RAL 9002
A9174006
Set of battery clips, 1 x 9 V
For contacting the battery.
Supply 2 single contacts
A9174006
Set of battery clips, 1 x 9 VProdotto aggiunto alla lista
tin-plated
A9174007
Display window M, border off-white
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version II.
Supply 1 display window, 1 adhesive foil
A9174007
Display window M, border off-whiteProdotto aggiunto alla lista
transparent
A9174009
Display window M, border black
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version II.
Supply 1 display window, 1 adhesive foil
A9174009
Display window M, border blackProdotto aggiunto alla lista
transparent
A9174307
Display window M, border off-white
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version III.
Supply 1 display window, 1 adhesive foil
A9174307
Display window M, border off-whiteProdotto aggiunto alla lista
transparent
A9174309
Display window M, border black
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version III.
Supply 1 display window, 1 adhesive foil
A9174309
Display window M, border blackProdotto aggiunto alla lista
transparent
A9174407
Display window M, border off-white
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For Version IV
Supply 1 display window, 1 adhesive foil
A9174407
Display window M, border off-whiteProdotto aggiunto alla lista
transparent
A9174409
Display window M, border black
The display window protects the installed display and achieves protection class IP 65 within the display area. The printing matches with the visible area of the display cutout. For case version IV.
Supply 1 display window, 1 adhesive foil
A9174409
Display window M, border blackProdotto aggiunto alla lista
transparent
A9175001
Sealing kit L
Application: for increasing the protection class, of DATEC-MOBIL-BOX L.
Supply 2 sealings, 4 sealings rings
A9175001
Sealing kit LProdotto aggiunto alla lista
A9175007
Display window L, border off-white
The display window protects the installed display and achieves protection class within the display area. The printing matches with the visible area of the display cutout.
Supply 1 display window, 1 adhesive foil
A9175007
Display window L, border off-whiteProdotto aggiunto alla lista
transparent
A9175009
Display window L, border black
The display window protects the installed display and achieves protection class within the display area. The printing matches with the visible area of the display cutout.
Supply 1 display window, 1 adhesive foil
A9175009
Display window L, border blackProdotto aggiunto alla lista
transparent
A9175108
Protector L
Special protector for DATEC-MOBIL-BOX L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Supply 1 protector
A9175108
Protector LProdotto aggiunto alla lista
volcano
A9190011
Set of battery clips, 2 x AA
For contacting the batteries. Comply with DIN EN 60601. The modified geometry rules out the possibility of a short circuit when inserting the batteries incorrectly.
Supply 1 double contacts right, 1 single contact positive, 1 single contact negative
A9190011
Set of battery clips, 2 x AAProdotto aggiunto alla lista
nickel-plated
A9190012
Set of battery clips, 4 x AA
For contacting the batteries. Comply with DIN EN 60601. The modified geometry rules out the possibility of a short circuit when inserting the batteries incorrectly.
Supply 2 single contact positive, 2 single contact negative
A9190012
Set of battery clips, 4 x AAProdotto aggiunto alla lista
nickel-plated
A9207150
Anti-slide feet 6.5 x 2 mm
Rubber feet with self-adhesive foil facilitate a secure position.
Supply 2 rubber feet
A9207150
Anti-slide feet 6.5 x 2 mmProdotto aggiunto alla lista
A9226127
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX L. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226127
Wall suspension elementProdotto aggiunto alla lista
off-white RAL 9002
A9226129
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX L. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226129
Wall suspension elementProdotto aggiunto alla lista
black RAL 9005
A9226227
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226227
Wall suspension elementProdotto aggiunto alla lista
off-white RAL 9002
A9226229
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226229
Wall suspension elementProdotto aggiunto alla lista
black RAL 9005
A9226237
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX S + SENSO-CASE M. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226237
Wall suspension elementProdotto aggiunto alla lista
off-white RAL 9002
A9226239
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX S + SENSO-CASE M. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226239
Wall suspension elementProdotto aggiunto alla lista
black RAL 9005
A9250250
Battery spacer
The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Supply 1 spacer
A9250250
Battery spacerProdotto aggiunto alla lista
50x25x4mm
A9250907
Tilt foot bar
Special for DATEC-MOBIL-BOX M/S (preformend centerings are already considered). Facilitates ergonomical reading angles (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a beter grip.
Supply 1 tilt foot bar, assembly kit
A9250907
Tilt foot barProdotto aggiunto alla lista
off-white RAL 9002
A9250909
Tilt foot bar
Special for DATEC-MOBIL-BOX M/S (preformend centerings are already considered). Facilitates ergonomical reading angles (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a beter grip.
Supply 1 tilt foot bar, assembly kit
A9250909
Tilt foot barProdotto aggiunto alla lista
black RAL 9005
A9345217
Set of battery compartment, 4 x AA
For 4 x 1.5 V mignon-cells (AA). Complies with DIN EN 60601 (short circuit caused by incorrect insertion of batteries impossible).
Supply 1 battery compartment, battery clips nickel-plated, assembly kit
A9345217
Set of battery compartment, 4 x AAProdotto aggiunto alla lista
off-white RAL 9002
Opzioni prodotto per Datec-Mobil-Box
Che caratteristiche deve avere il vostro prodotto personalizzato? Su richiesta vi forniamo i contenitori e manopole pronti per il montaggio e con tutte le modifiche e le caratteristiche specifiche.
