Accessori per contenitori
A9413331
SHELL-TYPE CASES G 190, Vers. I
Two-part plastic case with closed front and rear. Guide ridges and fastening pillars for mounting of PCBs in top and base.
VersionWithout battery compartment
Supply1 top and base part, assembly kit
Create la vostra scheda dati PDF per A9413331
Selezionate le informazioni prodotto per la vostra scheda dati.
Accessory "protection"
A9113150
Supply 1 contact-strip
A9113150
Contact-strips V, O, G 190
A9113630
Supply 1 O-ring, 4 rubber disks
A9113630
Sealing kit G 190Accessory "wall/holder"
A9204108
Supply 4 wall mounting brackets
A9204108
Wall mounting bracketspebble grey RAL 7032
A9325018
For the secure and stable mounting of IP rated electronic enclosures to poles, masts, and pipes using cable ties or stainless steel screw bands, suitable for pole diameters from 30 mm. The bracket is attached to the rear of the enclosure (four drilled holes required) and is manufactured from UV resistant material.
Note:
Every application (environment, sealing requirements, enclosure size/version, mast diameter, etc.) is different. For this reason, no mounting screws, cable ties or stainless steel screw bands are supplied; only the mast/pipe bracket is included. However, on request, we can provide a wide range of solutions tailored precisely to the intended application.
Supply 1 pole/mast mounting bracket
A9325018
Pole/mast mounting bracketanthracite grey RAL 7016
100x100x20mm
B1360048
Supply 1 wall suspension element, 1 adapter 58 x 128 mm, assembly kit
B1360048
Wall suspension elementspebble grey RAL 7032
Accessory "screws"
A0306031
Supply 1 self-tapping screw
A0306031
Self-tapping screws 3 x 6 mm (PZ1)Accessory
A9210290
Supply 2 rubber feet
A9210290
Anti-slide feet 9.5 x 3.8 mmNecessary accessories: sealing kit
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 285 KB
- AutoCAD DWG-File 666 KB
- AutoCAD DXF-File 2.423 KB
- Vista 3D in PDF (ruotare prodotto di 360°, nascondere/mostrare componenti e accessori ecc.) 2.007 KB
3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- 00008526.x_t 3.260 KB
- 00008526.STEP 10.961 KB
- 00008526.SAT 11.334 KB
(OKW product)
Servizio di customizzazione : Possiamo modificare i nostri contenitori per soddisfare le vostre specifiche esigenze. Saranno consegnati completamente finiti e pronti all’uso. Dovrete solamente installare la vostra elettronica al loro interno. Visualizza le opzioni di customizzazione A9413331 e non dimenticare di chiedere la quotazione!