DIN 标准导轨接线盒
Euro Case 欧型机盒
大格式桌面用机盒
Euro Case 欧型机盒提供最大的组装简易性: 毫不需要螺钉，机盒外壳、边条及侧板只通过压力就稳固卡紧
- 广泛的桌面或移动式应用
- 充足的操作和接口区域界面
- 2 个标准宽度 42 TE 和 63 TE
- 4 个标准高度 1 HE、 2 HE、3 HE、 6 HE; 可选配并可相互组合的侧板具备 3 个高度单位 (0,5 HE, 1 HE 和 2 HE)，由此可根据空间要求提供更多的机盒类型
- 内设的注塑加强肋使怡人的轻重量机盒非常稳固并防扭转
- 通过可折盒脚或坚固的支架使机盒达到符合人体工程学的倾斜方位，也可用作为携带手柄
- 带通风槽的板条解决机盒的通风问题
- 通过独特的 OKW 卡扣结构达到组装机盒的最小量装配工作
- 铝前板和后板提供简易的插入装配
- 通过选择外壳饰条或侧面部件，如配合您公司的颜色，可以创建达到符合您公司特殊形象的产品
- 防护等级 < IP 40
- 固定柱用于固定电路板和元器件
- 安全稳固的橡胶脚包括在供货范围内
应用范围
计算机外围设备、调制解调器和界面接口。 网络技术。 工艺工程控制。 电子医疗器械的数据采集。 测量控制技术。
请选择所需的产品类型或尺寸，或点击产品列表末尾的“选择所有产品”按键。
A0306031
Self-tapping screws 3 x 6 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0306031
Self-tapping screws 3 x 6 mm (PZ1)产品已添加到关注清单中
A0308031
Self-tapping screws 3 x 8 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0308031
Self-tapping screws 3 x 8 mm (PZ1)产品已添加到关注清单中
A0308132
Self-tapping screw 3 x 8 mm (T10)
Self-tapping screw with T10 Torx drive. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0308132
Self-tapping screw 3 x 8 mm (T10)产品已添加到关注清单中
A0314270
Front / rear panel 42 TE 1 HE
Front/rear panel for case 42 TE 1 HE.
Supply 1 front panel
A0314270
Front / rear panel 42 TE 1 HE产品已添加到关注清单中
matt anodised
250.8x46.3x2mm
A0316370
Front / rear panel 63 TE 1 HE
Front/rear panel for case 63 TE 1 HE.
Supply 1 front panel
A0316370
Front / rear panel 63 TE 1 HE产品已添加到关注清单中
matt anodised
357.8x46.3x2mm
A0324270
Front / rear panel 42 TE 2 HE
Front/rear panel for case 42 TE 2 HE.
Supply 1 front panel
A0324270
Front / rear panel 42 TE 2 HE产品已添加到关注清单中
matt anodised
250.8x90.7x2mm
A0326370
Front / rear panel 63 TE 2 HE
Front/rear panel for case 63 TE 2 HE.
Supply 1 front panel
A0326370
Front / rear panel 63 TE 2 HE产品已添加到关注清单中
matt anodised
357.8x90.7x2mm
A0334270
Front / rear panel 42 TE 3 HE
Front/rear panel for case 42 TE 3 HE.
Supply 1 front panel
A0334270
Front / rear panel 42 TE 3 HE产品已添加到关注清单中
matt anodised
250.8x135.2x2mm
A0336370
Front / rear panel 63 TE 3 HE
Front/rear panel for case 63 TE 3 HE.
Supply 1 front panel
A0336370
Front / rear panel 63 TE 3 HE产品已添加到关注清单中
matt anodised
357.8x135.2x2mm
A0350007
Tilt foot
The tilt foot is used for canting the unit. It can be locked into the case bottom and is retractable.
Supply 1 tilt foot
A0350007
Tilt foot产品已添加到关注清单中
off-white RAL 9002
A0354270
Front / rear panel 42 TE 1.5 HE
Front/rear panel for case 42 TE 1.5 HE.
Supply 1 front panel
A0354270
Front / rear panel 42 TE 1.5 HE产品已添加到关注清单中
matt anodised
250.8x68.5x2mm
A0366370
Front / rear panel 63 TE 6 HE
Front/rear panel for case 63 TE 6 HE.
Supply 1 front panel
A0366370
Front / rear panel 63 TE 6 HE产品已添加到关注清单中
matt anodised
268.6x357.8x2mm
