Acessórios para Caixas
Baixar arquivos 3D/2D
Adicionar ao carrinho Componentes Mínimos (para peças individuais)
1 parte de baixo, vers. I.
1 design dianteiro (tampa ou painel frontal Al).
1 painel de fundo com tiras de snap-in.
1 base – mesa de trabalho/parede –
ou
1 parte de baixo, vers. II.
1 design dianteiro (painel frontal ABS ou painel de vidro).
1 painel de fundo com tiras de snap-in.
1 base – mesa de trabalho/parede –
System components to complete
B4044407
Cover M
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply 1 cover, assembly kit
FecharB4044407
Cover MProduto adicionado a sua lista
off-white RAL 9002
225x165x14mm
B4044707
Bottom part M flat, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting cover or aluminium front panel (sep. article)
Supply 1 bottom part flat
FecharB4044707
Bottom part M flat, version IProduto adicionado a sua lista
off-white RAL 9002
225x165x25,5mm
IP 54 opt.
B4044717
Bottom part M flat, version II
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting ABS front panel or glass panel (sep. article)
Supply 1 bottom part flat
FecharB4044717
Bottom part M flat, version IIProduto adicionado a sua lista
off-white RAL 9002
225x165x25,5mm
IP 54 opt.
B4044757
Bottom part M high, version I
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting cover or aluminium front panel (sep. article)
Supply 1 bottom part high
FecharB4044757
Bottom part M high, version IProduto adicionado a sua lista
off-white RAL 9002
225x165x35,5mm
IP 54 opt.
B4044767
Bottom part M high, version II
Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.
Version Suitable for mounting ABS front panel or glass panel (sep. article)
Supply 1 bottom part high
FecharB4044767
Bottom part M high, version IIProduto adicionado a sua lista
off-white RAL 9002
225x165x35,5mm
IP 54 opt.
B4044847
Base M - desk-top/wall -
Assembly unit: for case combinations with bottom panel and snap-in strips. Case snaps into the base in vertical or horizontal position, depending on the application - see assembly instruction. If required, unit can be secured by latch lock. Ergonomically designed for operating and reading off. Direct wall mounting.
Supply 1 base, 2 clips, assembly kit
FecharB4044847
Base M - desk-top/wall -Produto adicionado a sua lista
off-white RAL 9002
153x153x63mm
B4144106
Front panel M
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply 1 front panel, assembly kit
FecharB4144106
Front panel MProduto adicionado a sua lista
matt anodised
221,5x161,5x2mm
B4144107
Front panel M
Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.
Supply 1 front panel, assembly kit
FecharB4144107
Front panel MProduto adicionado a sua lista
off-white RAL 9002
225,6x165,6x15,5mm
B4144203
Glass panel M
Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.
Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean
Supply 1 glass panel incl. mounting frame and adhesive foil
FecharB4144203
Glass panel MProduto adicionado a sua lista
clear
225,6x165,6x17,7mm
Accessory "protection"
B4144005
Sealing M (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply 1 sealing
FecharB4144005
Sealing M (bottom part - front design)Produto adicionado a sua lista
B4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply 1 sealing
FecharB4144006
Sealing M (bottom part - base/bot. panel/bat. comp...)Produto adicionado a sua lista
