Busca Avançada Código
Entrar Your location/language Alemanha, Português
B4144203 Glass panel M

B4144203

Glass panel M

Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version

Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply

1 glass panel incl. mounting frame and adhesive foil

  • Componentes adequados
  • Veja Opções de personalização

Móvel com compartimento para bateria

Móvel sem compartimento para bateria

Móvel com estação

Móvel / Parede

Mesa de trabalho (modelo parafuso de conexão)

Mesa de Trabalho / Parede

Instalação

Componentes Mínimos
1 parte de baixo, vers. I.
1 design dianteiro (cover).
1 painel inferior.
1 kit de montagem de instalação.

ou

1 parte de baixo, vers. II.
1 design dianteiro (painel frontal ABS ou painel de vidro).
1 painel inferior.
1 kit de montagem de instalação.

System components to complete

B4044717 Bottom part M flat, version II

B4044717

Bottom part M flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Fechar

B4044717

Bottom part M flat, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225x165x25,5mm
IP 54 opt.
B4044767 Bottom part M high, version II

B4044767

Bottom part M high, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Fechar

B4044767

Bottom part M high, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225x165x35,5mm
IP 54 opt.
B4144257 Bottom panel with snap-in strips M

B4144257

Bottom panel with snap-in strips M Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, 2 snap-in strips, assembly kit

Fechar

B4144257

Bottom panel with snap-in strips M
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4144587 Installation assembly kit M, flat

B4144587

Installation assembly kit M, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Fechar

B4144587

Installation assembly kit M, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
272x218mm
B4144597 Installation assembly kit M, high

B4144597

Installation assembly kit M, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Fechar

B4144597

Installation assembly kit M, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
272x218mm

Accessory "protection"

B4144005 Sealing M (bottom part - front design)

B4144005

Sealing M (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).

Supply 1 sealing

Fechar

B4144005

Sealing M (bottom part - front design)
Produto adicionado a sua lista
SEBS (TPE)
B4144006 Sealing M (bottom part - base/bot. panel/bat. comp...)

B4144006

Sealing M (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Fechar

B4144006

Sealing M (bottom part - base/bot. panel/bat. comp...)
Produto adicionado a sua lista
SEBS (TPE)

Customising options for B4144203

What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.

  • Dados técnicos
  • Desenho / Informações
  • Purchasing Data
Material
Colour
clear
Width
225,6 mm
Depth
165,6 mm
Height
17,7 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.

Assembly Instructions (Group)

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

Weight/1 part
388 g
Customs tariff number
(OKW product)
70060010
Country of manufacture
Alemanha