Acessórios para Caixas
B4213107
CARRYTEC L
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
SupplyTop and bottom parts, TPE handle pad, assembly kit
Gerar seu Datasheet em PDF para B4213107
Por favor, selecione os detalhes do produto que você gostaria de incluir ao PDF.
Accessory "battery"
A9338117
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Supply 1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws
A9338117
Battery compartment kit, 5 x AAoff-white RAL 9002
93x98mm
Accessory "station"
A9178007
Supply 1 contact
A9178007
Contacts, male
B4308127
Supply 1 base plate, 4 rubber feet, assembly kit
B4308127
Base plate for stationoff-white RAL 9002
B4313117
Supply 1 base, assembly kit
B4313117
Station Loff-white RAL 9002
B4313147
Supply 1 adapter and 2 self-tapping screws
B4313147
Adapter for Station Loff-white RAL 9002
Accessory "protection"
B4313001
Supply 1 sealing
B4313001
Sealing LAccessory "wall/holder"
B4308237
Supply 1 holding clamp, assembly kit
B4308237
Holding clampsoff-white RAL 9002
Accessory "screws"
A0325080
Supply 1 self-tapping screw
A0325080
Self-tapping screws 2.5 x 8 mm (PZ1)Accessory
A9178007
Supply 1 contact
A9178007
Contacts, male
A9178008
Supply 1 contact
A9178008
Contacts, female
A9193042
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station. The mounting plates can be installed first in the enclosure and station, and the contacts (accessories) at a later point in time.
Supply 2 mounting plates
A9193042
Mounting plates for contactsblack RAL 9005
A9193044
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station ("female" contact for the enclosure and "male" contact for the station).
Supply 2 mounting plates, 2 6-pin contacts ("female" and "male")
A9193044
Contacting kit, 6-pinblack RAL 9005
Enclosure
Handle pad
Necessary accessories: sealing kit
Handle pad volcano
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 398 KB
- AutoCAD DWG-File 922 KB
- AutoCAD DXF-File 3 634 KB
- Visualização PDF 3D (Acrobat Reader) (gira o produto 360°, pode ocultar parte do desenho selecionado pelo mouse, acessórios...) 1 259 KB
3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- 00013728.x_t 16 669 KB
- 00013728.step 28 131 KB
- 00013728.sat 34 508 KB
(OKW product)
Serviço de customização: Podemos modificar nossos gabinetes para atender às suas necessidades específicas. Os gabinetes serão entregues totalmente finalizados e prontos para uso. Tudo o que você precisa fazer é instalar seu equipamento no interior. Veja as opções de customização para B4213107 e não se esqueça de solicitar uma cotação!