Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
B4142257 Bottom panel with snap-in strips S

B4142257

Bottom panel with snap-in strips S

Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply

1 bottom panel, 2 snap-in strips, assembly kit

  • Komponenty / Akcesoria
  • Opcje dostosowywania

Na biurko lub ścianę

Podtynkowy

Minimalna ilość komponentów do skompletowania obudowy:
1 dolna część, wersja I.
1 przednia część (pokrywa).
1 dolny panel.
1 mocowanie podtynkowe
lub
1 dolna część, wersja II.
1 przednia część (panel ABS lub szklany).
1 dolny panel z zatrzaskami.
1 mocowanie podtynkowe

System components to complete

B4042407 Cover S

B4042407

Cover S Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Zamknij

B4042407

Cover S
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
190x135x14mm
B4042707 Bottom part S flat, version I

B4042707

Bottom part S flat, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Zamknij

B4042707

Bottom part S flat, version I
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
190x135x24,5mm
IP 54 opt.
B4042717 Bottom part S flat, version II

B4042717

Bottom part S flat, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Zamknij

B4042717

Bottom part S flat, version II
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
190x135x24,5mm
IP 54 opt.
B4042757 Bottom part S high, version I

B4042757

Bottom part S high, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Zamknij

B4042757

Bottom part S high, version I
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
190x135x34,5mm
IP 54 opt.
B4042767 Bottom part S high, version II

B4042767

Bottom part S high, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Zamknij

B4042767

Bottom part S high, version II
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
190x135x34,5mm
IP 54 opt.
B4142106 Front panel S

B4142106

Front panel S Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Zamknij

B4142106

Front panel S
produkt został dodany do twojej listy
Aluminium
matt anodised
186,5x131,5x2mm
B4142107 Front panel S

B4142107

Front panel S Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Zamknij

B4142107

Front panel S
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
190,6x135,6x14,5mm
B4142203 Glass panel S

B4142203

Glass panel S Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Zamknij

B4142203

Glass panel S
produkt został dodany do twojej listy
Glass
clear
190,6x135,6x16,7mm
B4142587 Installation assembly kit S, flat

B4142587

Installation assembly kit S, flat For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, flat

Supply 4 holders, assembly kit, design frame

Zamknij

B4142587

Installation assembly kit S, flat
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
234x185mm
B4142597 Installation assembly kit S, high

B4142597

Installation assembly kit S, high For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.

Version Holders matches bottom part, high

Supply 4 holders, assembly kit, design frame

Zamknij

B4142597

Installation assembly kit S, high
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
234x185mm

Accessory "protection"

B4142005 Sealing S (bottom part - front design)

B4142005

Sealing S (bottom part - front design) For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).

Supply 1 sealing

Zamknij

B4142005

Sealing S (bottom part - front design)
produkt został dodany do twojej listy
SEBS (TPE)
B4142006 Sealing S (bottom part - base/bot. panel/bat. comp...)

B4142006

Sealing S (bottom part - base/bot. panel/bat. comp...) For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).

Supply 1 sealing

Zamknij

B4142006

Sealing S (bottom part - base/bot. panel/bat. comp...)
produkt został dodany do twojej listy
SEBS (TPE)

Opcje dostosowywania dla B4142257

What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.

  • Informacje techniczne
  • Rysunki / Informacje
  • Dane zakupowe
Kolor
off-white RAL 9002
Please take the dimensions from current parts. These are subject to material-specific manufacturing tolerances.

Assembly Instructions (Group)

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

Weight/1 part
43 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
Germany