A9199008

Set of screws

Screw kit for mounting PCBs. Diameter 2.5 x 6 mm, type PZ1.

Supply

4 screws

Create la vostra scheda dati PDF per A9199008

Selezionate le informazioni prodotto per la vostra scheda dati.

Aggiungi al carrello Aggiungi al carrello Aggiungi al carrello
Prodotto aggiunto alla lista
continua o Vai al carrello
A0612007 COMTEC 120 F, Vers. I

A0612007

COMTEC 120 F, Vers. I Two-part case in flat construction for table top and wall-mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0612007

COMTEC 120 F, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
120x150x42,8mm
A0612009 COMTEC 120 F, Vers. I

A0612009

COMTEC 120 F, Vers. I Two-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0612009

COMTEC 120 F, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
120x150x42,8mm
A0612107 COMTEC 120 H, Vers. I

A0612107

COMTEC 120 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0612107

COMTEC 120 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
120x150x62,8mm
A0612109 COMTEC 120 H, Vers. I

A0612109

COMTEC 120 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0612109

COMTEC 120 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
120x150x62,8mm
A0615007 COMTEC 150 F, Vers. I

A0615007

COMTEC 150 F, Vers. I Two-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0615007

COMTEC 150 F, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
150x200x51,5mm
A0615009 COMTEC 150 F, Vers. I

A0615009

COMTEC 150 F, Vers. I Two-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0615009

COMTEC 150 F, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
150x200x51,5mm
A0615107 COMTEC 150 H, Vers. I

A0615107

COMTEC 150 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0615107

COMTEC 150 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
150x200x71,5mm
A0615109 COMTEC 150 H, Vers. I

A0615109

COMTEC 150 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Operating area ergonomically sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0615109

COMTEC 150 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
150x200x71,5mm
A0615117 COMTEC 150 H, Vers. II

A0615117

COMTEC 150 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

A0615117

COMTEC 150 H, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
150x200x71,5mm
A0615119 COMTEC 150 H, Vers. II

A0615119

COMTEC 150 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

A0615119

COMTEC 150 H, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
150x200x71,5mm
A0620007 COMTEC 200 F, Vers. I

A0620007

COMTEC 200 F, Vers. I Two-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0620007

COMTEC 200 F, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
200x150x42,8mm
A0620009 COMTEC 200 F, Vers. I

A0620009

COMTEC 200 F, Vers. I Two-part case in flat construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0620009

COMTEC 200 F, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
200x150x42,8mm
A0620107 COMTEC 200 H, Vers. I

A0620107

COMTEC 200 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Operating area ergonomically sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0620107

COMTEC 200 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
200x150x62,8mm
A0620109 COMTEC 200 H, Vers. I

A0620109

COMTEC 200 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Operating area ergonomically sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0620109

COMTEC 200 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
200x150x62,8mm
A0620117 COMTEC 200 H, Vers. II

A0620117

COMTEC 200 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

A0620117

COMTEC 200 H, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
200x150x62,8mm
A0620119 COMTEC 200 H, Vers. II

A0620119

COMTEC 200 H, Vers. II Three-part case in high construction for table top and wall mounted applications. Ergonomically operating area sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version With opening for inserting a battery compartment at your choice in the bottom part, lid of battery compartment to be snapped-in

Supply 1 top and bottom part, lid of battery compartment, assembly kit

A0620119

COMTEC 200 H, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
200x150x62,8mm
A0629107 COMTEC 290 H, Vers. I

A0629107

COMTEC 290 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Operating area ergonomically sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0629107

COMTEC 290 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x75,5mm
A0629109 COMTEC 290 H, Vers. I

A0629109

COMTEC 290 H, Vers. I Two-part case in high construction for table top and wall mounted applications. Operating area ergonomically sloped by 10°, 1.2 mm recessed for protecting membrane keyboards. Fixing towers in bottom and top part. Big area for interfaces at the top part's rear.

Version Without battery compartment

Supply 1 top and bottom part, assembly kit

A0629109

COMTEC 290 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
290x200x75,5mm
B1040365 TOPTEC 102, Vers. I

B1040365

TOPTEC 102, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the bottom.

Version without ventilations slots.

Supply 1 case-top and base, 2 end panels

B1040365

TOPTEC 102, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
102x54x30mm
B1040369 TOPTEC 102, Vers. I

B1040369

TOPTEC 102, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the bottom.

Version without ventilations slots.

Supply 1 case-top and base, 2 end panels

B1040369

TOPTEC 102, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
102x54x30mm
B1040465 TOPTEC 102, Vers. II

B1040465

TOPTEC 102, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the bottom.

Version with ventilations slots.

Supply 1 case-top and base, 2 end panels

B1040465

TOPTEC 102, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
102x54x30mm
B1040469 TOPTEC 102, Vers. II

B1040469

TOPTEC 102, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the bottom.

Version with ventilations slots.

Supply 1 case-top and base, 2 end panels

B1040469

TOPTEC 102, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
102x54x30mm
B1050365 TOPTEC 123 H, Vers. I

B1050365

TOPTEC 123 H, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version without ventilations slots.

Supply 1 case-top and base, 2 end panels

B1050365

TOPTEC 123 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
123x68x45mm
B1050369 TOPTEC 123 H, Vers. I

B1050369

TOPTEC 123 H, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1050369

TOPTEC 123 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
123x68x45mm
B1050465 TOPTEC 123 H, Vers. II

B1050465

TOPTEC 123 H, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1050465

TOPTEC 123 H, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
123x68x45mm
B1050469 TOPTEC 123 H, Vers. II

B1050469

TOPTEC 123 H, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1050469

TOPTEC 123 H, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
123x68x45mm
B1055365 TOPTEC 123 F, Vers. I

B1055365

TOPTEC 123 F, Vers. I Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1055365

TOPTEC 123 F, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
123x68x30mm
B1055369 TOPTEC 123 F, Vers. I

B1055369

TOPTEC 123 F, Vers. I Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1055369

TOPTEC 123 F, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
123x68x30mm
B1055465 TOPTEC 123 F, Vers. II

B1055465

TOPTEC 123 F, Vers. II Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1055465

TOPTEC 123 F, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
123x68x30mm
B1055469 TOPTEC 123 F, Vers. II

B1055469

TOPTEC 123 F, Vers. II Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and bottom.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1055469

TOPTEC 123 F, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
123x68x30mm
B1060365 TOPTEC 154 H, Vers. I

B1060365

TOPTEC 154 H, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1060365

TOPTEC 154 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
154x84x56mm
B1060369 TOPTEC 154 H, Vers. I

B1060369

TOPTEC 154 H, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1060369

TOPTEC 154 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
154x84x56mm
B1060465 TOPTEC 154 H, Vers. II

B1060465

TOPTEC 154 H, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1060465

TOPTEC 154 H, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
154x84x56mm
B1060469 TOPTEC 154 H, Vers. II

B1060469

TOPTEC 154 H, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1060469

TOPTEC 154 H, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
154x84x56mm
B1065365 TOPTEC 154 F, Vers. I

B1065365

TOPTEC 154 F, Vers. I Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1065365

TOPTEC 154 F, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
154x84x38mm
B1065369 TOPTEC 154 F, Vers. I

B1065369

TOPTEC 154 F, Vers. I Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1065369

TOPTEC 154 F, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
154x84x38mm
B1065465 TOPTEC 154 F, Vers. II

B1065465

TOPTEC 154 F, Vers. II Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1065465

TOPTEC 154 F, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
154x84x38mm
B1065469 TOPTEC 154 F, Vers. II

B1065469

TOPTEC 154 F, Vers. II Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1065469

TOPTEC 154 F, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
154x84x38mm
B1070365 TOPTEC 194 H, Vers. I

B1070365

TOPTEC 194 H, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1070365

TOPTEC 194 H, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
194x115x68mm
B1070369 TOPTEC 194 H, Vers. I

B1070369

TOPTEC 194 H, Vers. I Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1070369

TOPTEC 194 H, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
194x115x68mm
B1070465 TOPTEC 194 H, Vers. II

B1070465

TOPTEC 194 H, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1070465

TOPTEC 194 H, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
194x115x68mm
B1070469 TOPTEC 194 H, Vers. II

B1070469

TOPTEC 194 H, Vers. II Electronic case - high version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1070469

TOPTEC 194 H, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
194x115x68mm
B1075365 TOPTEC 194 F, Vers. I

B1075365

TOPTEC 194 F, Vers. I Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1075365

TOPTEC 194 F, Vers. I
Prodotto aggiunto alla lista

off-white RAL 9002
194x115x46mm
B1075369 TOPTEC 194 F, Vers. I

B1075369

TOPTEC 194 F, Vers. I Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version Without ventilations slots

Supply 1 case-top and base, 2 end panels

B1075369

TOPTEC 194 F, Vers. I
Prodotto aggiunto alla lista

black RAL 9005
194x115x46mm
B1075465 TOPTEC 194 F, Vers. II

B1075465

TOPTEC 194 F, Vers. II Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1075465

TOPTEC 194 F, Vers. II
Prodotto aggiunto alla lista

off-white RAL 9002
194x115x46mm
B1075469 TOPTEC 194 F, Vers. II

B1075469

TOPTEC 194 F, Vers. II Electronic case - flat version. Case parts will be snapped in by an innovative snap-lock. Screw towers for mounting of PCBs in the top and base.

Version With ventilations slots

Supply 1 case-top and base, 2 end panels

B1075469

TOPTEC 194 F, Vers. II
Prodotto aggiunto alla lista

black RAL 9005
194x115x46mm
B2010007 L-shells D 220, without holes

B2010007

L-shells D 220, without holes Component as separate parts: L-shells without hole. Ideal for the installation of double-Eurocards 233.4 x 220 mm. Side trims 220 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2010007

L-shells D 220, without holes
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2010107 L-shells D 220, with holes for handle

B2010107

L-shells D 220, with holes for handle Component as separate parts: L-shells with hole for handle. Ideal for the installation of double-Eurocards 233.4 x 220 mm. Side trims 220 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2010107

L-shells D 220, with holes for handle
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2011007 L-shells D 160, without holes

B2011007

L-shells D 160, without holes Component as separate parts: L-shells without hole. Ideal for the installation of double-Eurocards 233.4 x 160 mm. Side trims 160 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2011007

L-shells D 160, without holes
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2011107 L-shells D 160, with holes for handle

B2011107

L-shells D 160, with holes for handle Component as separate parts: L-shells with hole for handle. Ideal for the installation of double-Eurocards 233.4 x 160 mm. Side trims 160 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2011107

L-shells D 160, with holes for handle
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2012007 L-shells E 220, without holes

B2012007

L-shells E 220, without holes Component as separate parts: L-shells without hole. Ideal for the instalation of Eurocards 100 x 220 mm or 100 x 160 mm. Side trims 220 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2012007

L-shells E 220, without holes
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2012107 L-shells E 220, with holes for handle

B2012107

L-shells E 220, with holes for handle Component as separate parts: L-shells with hole for handle. Ideal for the instalation of Eurocards 100 x 220 mm or 100 x 160 mm. Side trims 220 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2012107

L-shells E 220, with holes for handle
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2013007 L-shells E 160, without holes

B2013007

L-shells E 160, without holes Component as separate parts: L-shells without hole. Ideal for the installation of Eurocards 100 x 160 mm. Side trims 220 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2013007

L-shells E 160, without holes
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2013107 L-shells E 160, with holes for handle

B2013107

L-shells E 160, with holes for handle Component as separate parts: L-shells with hole for handle. Ideal for the installation of Eurocards 100 x 160 mm. Side trims 220 (sep. article) necessary for covering the screw fixing.

Supply 2 L-shells, incl. assembly kit, 4 case feet

B2013107

L-shells E 160, with holes for handle
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2020005 Side trims 220, without ventilation

B2020005

Side trims 220, without ventilation Side trims without ventilation. The trims will be slided laterally onto the L-shells and are self-locking.

Supply 2 side trims

B2020005

Side trims 220, without ventilation
Prodotto aggiunto alla lista

lagoon
B2020007 Side trims 220, without ventilation

B2020007

Side trims 220, without ventilation Side trims without ventilation. The trims will be slided laterally onto the L-shells and are self-locking.

Supply 2 side trims

B2020007

Side trims 220, without ventilation
Prodotto aggiunto alla lista

off-white RAL 9002
B2021005 Side trims 220, with ventilation

B2021005

Side trims 220, with ventilation Side trims with ventilation. The trims will be slided laterally onto the L-shells and are self-locking.

Supply 2 side trims

B2021005

Side trims 220, with ventilation
Prodotto aggiunto alla lista

lagoon
B2021007 Side trims 220, with ventilation

B2021007

Side trims 220, with ventilation Side trims with ventilation. The trims will be slided laterally onto the L-shells and are self-locking.

Supply 2 side trims

B2021007

Side trims 220, with ventilation
Prodotto aggiunto alla lista

off-white RAL 9002
B2022005 Side trims 160, without ventilation

B2022005

Side trims 160, without ventilation Side trims without ventilation. The trims will be slided laterally onto the L-shells and are self-locking.

Supply 2 side trims

B2022005

Side trims 160, without ventilation
Prodotto aggiunto alla lista

lagoon
B2022007 Side trims 160, without ventilation

B2022007

Side trims 160, without ventilation Side trims without ventilation. The trims will be slided laterally onto the L-Shells and are self-locking.

Supply 2 side trims

B2022007

Side trims 160, without ventilation
Prodotto aggiunto alla lista

off-white RAL 9002
B2023005 Side trims 160, with ventilation

B2023005

Side trims 160, with ventilation Side trims with ventilation. The trims will be slided laterally onto the L-Shells and are self-locking.

Supply 2 side trims

B2023005

Side trims 160, with ventilation
Prodotto aggiunto alla lista

lagoon
B2023007 Side trims 160, with ventilation

B2023007

Side trims 160, with ventilation Side trims with ventilation. The trims will be slided laterally onto the L-Shells and are self-locking.

Supply 2 side trims

B2023007

Side trims 160, with ventilation
Prodotto aggiunto alla lista

off-white RAL 9002
B2030007 Side panels 220, without holes

B2030007

Side panels 220, without holes Side panels without hole for 50 mm additional height. Suitable for Meditec D220/E220.

Supply 2 side panels, set of screws

B2030007

Side panels 220, without holes
Prodotto aggiunto alla lista

off-white RAL 9002
B2030107 Side panels 220, with holes for handle

B2030107

Side panels 220, with holes for handle Side panels with hole for 50 mm additional height. Suitable for Meditec D220/E220.

Supply 2 side panels, set of screws

B2030107

Side panels 220, with holes for handle
Prodotto aggiunto alla lista

off-white RAL 9002
B2031007 Side panels 160, without holes

B2031007

Side panels 160, without holes Side panels without hole for 50 mm additional height. Suitable for Meditec D160/E160.

Supply 2 side panel, set of screws

B2031007

Side panels 160, without holes
Prodotto aggiunto alla lista

off-white RAL 9002
B2031107 Side panels 160, with holes for handle

B2031107

Side panels 160, with holes for handle Side panels with hole for 50 mm additional height. Suitable for Meditec D160/E160.

Supply 2 side panel, set of screws

B2031107

Side panels 160, with holes for handle
Prodotto aggiunto alla lista

off-white RAL 9002
B2116507 Handle bar E

B2116507

Handle bar E For canting and carrying the unit. To be assembled from the outside. Strong ratchet with 30° indexing. For combination with side panel with hole for handle.

Supply 2 side arms, 1 al-profile, antislipping device, lid, assembly kit

B2116507

Handle bar E
Prodotto aggiunto alla lista

off-white RAL 9002
B2129507 Handle bar D

B2129507

Handle bar D For canting and carrying the unit. To be assembled from the outside. Strong ratchet with 30° indexing. For combination with side panel with hole for handle.

Supply 2 side arms, 1 Al-profile, antislipping device, lid, assembly kit

B2129507

Handle bar D
Prodotto aggiunto alla lista

off-white RAL 9002
B2210005 MEDITEC D 220, without handle bar

B2210005

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet

B2210005

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210007 MEDITEC D 220, without handle bar

B2210007

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet

B2210007

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210015 MEDITEC D 220, without handle bar

B2210015

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet

B2210015

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210017 MEDITEC D 220, without handle bar

B2210017

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit, 4 case-feet

B2210017

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210105 MEDITEC D 220, with handle bar

B2210105

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2210105

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210107 MEDITEC D 220, with handle bar

B2210107

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2210107

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210115 MEDITEC D 220, with handle bar

B2210115

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2210115

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210117 MEDITEC D 220, with handle bar

B2210117

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2210117

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x74mm
B2210205 MEDITEC D 220, without handle bar

B2210205

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2210205

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210207 MEDITEC D 220, without handle bar

B2210207

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2210207

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210215 MEDITEC D 220, without handle bar

B2210215

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2210215

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210217 MEDITEC D 220, without handle bar

B2210217

MEDITEC D 220, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2210217

MEDITEC D 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210305 MEDITEC D 220, with handle bar

B2210305

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2210305

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210307 MEDITEC D 220, with handle bar

B2210307

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2210307

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210315 MEDITEC D 220, with handle bar

B2210315

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2210315

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2210317 MEDITEC D 220, with handle bar

B2210317

MEDITEC D 220, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 220 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2210317

MEDITEC D 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x260x124mm
B2211005 MEDITEC D 160, without handle bar

B2211005

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet

B2211005

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211007 MEDITEC D 160, without handle bar

B2211007

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet

B2211007

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211015 MEDITEC D 160, without handle bar

B2211015

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet

B2211015

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211017 MEDITEC D 160, without handle bar

B2211017

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit, 4 case-feet

B2211017

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211105 MEDITEC D 160, with handle bar

B2211105

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2211105

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211107 MEDITEC D 160, with handle bar

B2211107

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2211107

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211115 MEDITEC D 160, with handle bar

B2211115

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2211115

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211117 MEDITEC D 160, with handle bar

B2211117

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2211117

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x74mm
B2211205 MEDITEC D 160, without handle bar

B2211205

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2211205

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211207 MEDITEC D 160, without handle bar

B2211207

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2211207

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211215 MEDITEC D 160, without handle bar

B2211215

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2211215

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211217 MEDITEC D 160, without handle bar

B2211217

MEDITEC D 160, without handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2211217

MEDITEC D 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211305 MEDITEC D 160, with handle bar

B2211305

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2211305

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211307 MEDITEC D 160, with handle bar

B2211307

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2211307

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211315 MEDITEC D 160, with handle bar

B2211315

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2211315

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2211317 MEDITEC D 160, with handle bar

B2211317

MEDITEC D 160, with handle bar Complete case. Ideally suited to accommodate double-Eurocards 233.4 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2211317

MEDITEC D 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
290x200x124mm
B2212005 MEDITEC E 220, without handle bar

B2212005

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet

B2212005

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212007 MEDITEC E 220, without handle bar

B2212007

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet

B2212007

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212015 MEDITEC E 220, without handle bar

B2212015

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet

B2212015

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212017 MEDITEC E 220, without handle bar

B2212017

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit, 4 case-feet

B2212017

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212105 MEDITEC E 220, with handle bar

B2212105

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2212105

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212107 MEDITEC E 220, with handle bar

B2212107

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2212107

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212115 MEDITEC E 220, with handle bar

B2212115

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2212115

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212117 MEDITEC E 220, with handle bar

B2212117

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2212117

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x74mm
B2212205 MEDITEC E 220, without handle bar

B2212205

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2212205

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212207 MEDITEC E 220, without handle bar

B2212207

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2212207

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212215 MEDITEC E 220, without handle bar

B2212215

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2212215

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212217 MEDITEC E 220, without handle bar

B2212217

MEDITEC E 220, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2212217

MEDITEC E 220, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212305 MEDITEC E 220, with handle bar

B2212305

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2212305

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212307 MEDITEC E 220, with handle bar

B2212307

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2212307

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212315 MEDITEC E 220, with handle bar

B2212315

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2212315

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2212317 MEDITEC E 220, with handle bar

B2212317

MEDITEC E 220, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 220 mm or 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2212317

MEDITEC E 220, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x260x124mm
B2213005 MEDITEC E 160, without handle bar

B2213005

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet

B2213005

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213007 MEDITEC E 160, without handle bar

B2213007

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet

B2213007

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213015 MEDITEC E 160, without handle bar

B2213015

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet

B2213015

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213017 MEDITEC E 160, without handle bar

B2213017

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit and 4 case-feet

B2213017

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213105 MEDITEC E 160, with handle bar

B2213105

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2213105

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213107 MEDITEC E 160, with handle bar

B2213107

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), assembly kit, 4 case-feet, 1 handle bar

B2213107

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213115 MEDITEC E 160, with handle bar

B2213115

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), assembly kit, 4 case-feet, 1 handle bar

B2213115

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213117 MEDITEC E 160, with handle bar

B2213117

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), assembly kit and 4 case-feet, 1 handle bar

B2213117

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x74mm
B2213205 MEDITEC E 160, without handle bar

B2213205

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2213205

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213207 MEDITEC E 160, without handle bar

B2213207

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet

B2213207

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213215 MEDITEC E 160, without handle bar

B2213215

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet

B2213215

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213217 MEDITEC E 160, without handle bar

B2213217

MEDITEC E 160, without handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit and 4 case-feet

B2213217

MEDITEC E 160, without handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213305 MEDITEC E 160, with handle bar

B2213305

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2213305

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213307 MEDITEC E 160, with handle bar

B2213307

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims with ventilation (colour off-white), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2213307

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213315 MEDITEC E 160, with handle bar

B2213315

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour lagoon), 2 side panels, assembly kit, 4 case-feet, 1 handle bar

B2213315

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B2213317 MEDITEC E 160, with handle bar

B2213317

MEDITEC E 160, with handle bar Complete case. Ideally suited to accommodate single-Eurocards 100 x 160 mm. Two identical shells are joined together so that they overlap. Side trims easily fitted. Non-slipping case feet are fixed by screws to ensure a firm and stable support.

Supply 2 L-Shells, 2 side trims without ventilation (colour off-white), 2 side panels, assembly kit and 4 case-feet, 1 handle bar

B2213317

MEDITEC E 160, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
160x200x124mm
B3015117 MOTEC S, flat/flat

B3015117

MOTEC S, flat/flat Desk top case with flat base and top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3015117

MOTEC S, flat/flat
Prodotto aggiunto alla lista

off-white RAL 9002
155x105x40mm
B3015127 MOTEC S, flat/high

B3015127

MOTEC S, flat/high Desk top case with flat base and high top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3015127

MOTEC S, flat/high
Prodotto aggiunto alla lista

off-white RAL 9002
155x105x65mm
B3015137 MOTEC S, high/high

B3015137

MOTEC S, high/high Desk top case with high base and top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3015137

MOTEC S, high/high
Prodotto aggiunto alla lista

off-white RAL 9002
155x105x90mm
B3020117 MOTEC M, flat/flat

B3020117

MOTEC M, flat/flat Desk top case with flat base and top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3020117

MOTEC M, flat/flat
Prodotto aggiunto alla lista

off-white RAL 9002
205x140x50mm
B3020127 MOTEC M, flat/high

B3020127

MOTEC M, flat/high Desk top case with flat base and high top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3020127

MOTEC M, flat/high
Prodotto aggiunto alla lista

off-white RAL 9002
205x140x75mm
B3020137 MOTEC M, high/high

B3020137

MOTEC M, high/high Desk top case with high base and top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3020137

MOTEC M, high/high
Prodotto aggiunto alla lista

off-white RAL 9002
205x140x100mm
B3020147 MOTEC M, with handle bar

B3020147

MOTEC M, with handle bar Desk top case with handle bar in version with flat base and high top part. With 30 degress indexing. Front and rear part open. Screw tower for PCBs and vertical guides for mounting panels. Front panels as accessory.

Supply 1 top and base part, handle bar, 4 self-adhesive case feet

B3020147

MOTEC M, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
205x140x75mm
B3023117 MOTEC-L, flat/flat

B3023117

MOTEC-L, flat/flat Desk top case with flat base and top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3023117

MOTEC-L, flat/flat
Prodotto aggiunto alla lista

off-white RAL 9002
235x165x60mm
B3023127 MOTEC L, flat/high

B3023127

MOTEC L, flat/high Desk top case with flat base and high top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3023127

MOTEC L, flat/high
Prodotto aggiunto alla lista

off-white RAL 9002
235x165x85mm
B3023137 MOTEC L, high/high

B3023137

MOTEC L, high/high Desk top case with high base and top part. Screwless mounting of the shells. Front and rear part open. Screw towers for PCBs and vertical guides for mounting panels. Front and rear panels to slide in as accessory.

Supply 1 top and base part, 4 self-adhesive case feet

B3023137

MOTEC L, high/high
Prodotto aggiunto alla lista

off-white RAL 9002
235x165x110mm
B3023147 MOTEC L, with handle bar

B3023147

MOTEC L, with handle bar Desk top case with handle bar in version with flat base and high top part. With 30 degress indexing. Front and rear part open. Screw tower for PCBs and vertical guides for mounting panels. Front panels as accessory.

Supply 1 top and base part, handle bar, 4 self-adhesive case feet

B3023147

MOTEC L, with handle bar
Prodotto aggiunto alla lista

off-white RAL 9002
235x165x85mm
Standards
RoHS compliant
REACH compliant
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
4 g
Customs tariff number
(OKW product)
73181558
Country of manufacture
Germany