DIN 标准导轨接线盒
Carrytec 手提盒
带功能把手的塑料机盒
CARRYTEC 手提盒为许多不同的应用范围和区域提供了唯一的一个在室内和室外应用的功能手柄。
- 防滑性通过重心的合理设置
- CARRYTEC M 扁平式手提盒用于封装平板电脑或类似物
- 背面设置安装于三脚架或悬臂; 达到视屏/操作面的快速定位和取向及规整的电缆引导
- 特大及可用于用户界面接口的表面
(S: 8,4"/21 cm; M: 10,4"/26 cm; L: 13,4"/34 cm) - 为接口提供大的安装深度和足够的空间并显示超薄的外观
- 安装接口具备保护套
- 具备带保险的台式盒架和 / 或挂墙支架; 简单的数据和充电电流传输; 接触件作为附件（扁平机盒除外）
- 固定夹用于安装在圆管和 DIN EN ISO 19054 标准导轨
- 耐冲击塑料材质适应严酷的使用
- 带密封件达到保护等级 IP 54 （配件）
- 操作区域凹陷，以保护膜键盘
- 机盒易于清洁
- 适配 5 个 AA 电池的电池仓可选 (需要加工)
- 存放仪器、传感器、配件等物品的保护袋 (规格 S 和 M)
- 固定柱用于安装电路板和安装组件
Learn more!
Read our blog posts on carrytec View blog posts >>
应用范围
独特的多种应用功能: 手提 - 台式 - 墙挂 - 型轨安装 - 管安装 - 三脚架 - 悬臂。 根据应用（室内或室外），创新的机盒可提供各种材质，如耐冲击的塑料、协调的颜色选择和多种组合可能。
B4208107
CARRYTEC S
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4208107
CARRYTEC S产品已添加到关注清单中
off-white RAL 9002
222x205x80mm
B4208208
CARRYTEC S
Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4208208
CARRYTEC S产品已添加到关注清单中
lava
222x205x80mm
B4210107
CARRYTEC M
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4210107
CARRYTEC M产品已添加到关注清单中
off-white RAL 9002
270x247x91mm
B4210127
CARRYTEC M slim version
Strong plastic enclosure with handle, slim version. Ideal for the installation of tablet computers and the like, which have modest space requirements and can be carried comfortably and securely in the Carrytec.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4210127
CARRYTEC M slim version产品已添加到关注清单中
off-white RAL 9002
270x247x42mm
B4210208
CARRYTEC M
Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4210208
CARRYTEC M产品已添加到关注清单中
lava
270x247x91mm
B4210228
CARRYTEC M slim version
Strong plastic enclosure with handle, slim version. Ideal for the installation of tablet computers and the like, which have modest space requirements and can be carried comfortably and securely in the Carrytec.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.
The top part is identical with that of the larger enclosure versions; only the bottom part is flatter.
Top part with recessed surface for using membrane keyboards. Attachment domes for PCBs and components in the top and bottom parts. Interface installation at the rear, for example for support arm applications, ensures orderly cable routing through enclosure connection.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4210228
CARRYTEC M slim version产品已添加到关注清单中
lava
270x247x42mm
B4213107
CARRYTEC L
Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4213107
CARRYTEC L产品已添加到关注清单中
off-white RAL 9002
348x303x117mm
B4213208
CARRYTEC L
Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.
Supply Top and bottom parts, TPE handle pad, assembly kit
B4213208
CARRYTEC L产品已添加到关注清单中
lava
348x303x117mm
A0325080
Self-tapping screws 2.5 x 8 mm (PZ1)
Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastening components, boards and PCBs onto pillars.
Supply 1 self-tapping screw
A0325080
Self-tapping screws 2.5 x 8 mm (PZ1)产品已添加到关注清单中
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178007
Contacts, male产品已添加到关注清单中
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178008
Contacts, female产品已添加到关注清单中
A9193042
Mounting plates for contacts
Universal accessories that simplify the assembly of contacts for transferring data and charging current between enclosures and stations. Available as a kit consisting of two plastic mounting plates for holding the 6-pin contacts which are available as accessories ("female" contact for the enclosure and "male" contact for the station).
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station. The mounting plates can be installed first in the enclosure and station, and the contacts (accessories) at a later point in time.
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station. The mounting plates can be installed first in the enclosure and station, and the contacts (accessories) at a later point in time.
Supply 2 mounting plates
A9193042
Mounting plates for contacts产品已添加到关注清单中
black RAL 9005
A9193044
Contacting kit, 6-pin
Universal accessory consisting of mounting plates and 6-pin contacts. Simplifies the assembly of contacts for transferring data and charging current between enclosures and stations. The "female" and "male" contacts are already permanently glued in the corresponding mounting plate. The contact pins are freely accessible for soldering work.
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station ("female" contact for the enclosure and "male" contact for the station).
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station ("female" contact for the enclosure and "male" contact for the station).
Supply 2 mounting plates, 2 6-pin contacts ("female" and "male")
A9193044
Contacting kit, 6-pin产品已添加到关注清单中
black RAL 9005
A9338117
Battery compartment kit, 5 x AA
For direct installation in front panels or case walls. Easy battery replacement. Battery compartment lid for snap-in and/or screw-on mounting.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Supply 1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws
A9338117
Battery compartment kit, 5 x AA产品已添加到关注清单中
off-white RAL 9002
93x98mm
A9338218
Battery compartment kit, 5 x AA
For direct installation in front panels or case walls. Easy battery replacement. Battery compartment lid for snap-in and/or screw-on mounting.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Assembly: Screwed to bracket from inside. Alternatively with adhesive foil, on request. Recommended for 3 mm wall thickness where a recess of 1.5 mm is necessary, for the battery compartment is flush with the wall surface. Adjustment of recess or screw length required for greater wall thicknesses.
Supply 1 battery comp., 1 battery comp. lid + M3 screw, 1 holder, 2 sealings, 1 set of battery clips, nickel-plated, 4 self-tapping screws
A9338218
Battery compartment kit, 5 x AA产品已添加到关注清单中
lava
93x98mm
B4308001
Sealing S
Application: for increasing the protection class, of CARRYTEC S. Bottom part with groove to assemble the sealing.
Supply 1 sealing
B4308001
Sealing S产品已添加到关注清单中
B4308117
Station S/M
For secure storage of the enclosure. Can be used on table stand and/or wall suspension element. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply 1 base, assembly kit
B4308117
Station S/M产品已添加到关注清单中
off-white RAL 9002
B4308127
Base plate for station
Recommended for table-top applications. The rubber feet included in the supply ensure that the table-top version does not slip.
Supply 1 base plate, 4 rubber feet, assembly kit
B4308127
Base plate for station产品已添加到关注清单中
off-white RAL 9002
B4308218
Station S/M
For secure storage of the enclosure. Can be used on table stand and/or wall suspension element. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply 1 base, assembly kit
B4308218
Station S/M产品已添加到关注清单中
lava
B4308228
Base plate for station
Recommended for table-top applications. The rubber feet included in the supply ensure that the table-top version does not slip.
Supply 1 base plate, 4 rubber feet, assembly kit
B4308228
Base plate for station产品已添加到关注清单中
lava
B4308237
Holding clamps
For hanging the enclosure from round tubes Ø 32 mm and standard equipment rails DIN EN ISO 19054 (25 x 10 mm). 2 locating holes Ø 2.4 mm are required. For attachment, 2 stainless steel Torx screws Ø 3 x 8 mm (Torx 10) are included in the set.
Supply 1 holding clamp, assembly kit
B4308237
Holding clamps产品已添加到关注清单中
off-white RAL 9002
B4308238
Holding clamps
For hanging the enclosure from round tubes Ø 32 mm and standard equipment rails DIN EN ISO 19054 (25 x 10 mm). 2 locating holes Ø 2.4 mm are required. For attachment, 2 stainless steel Torx screws Ø 3 x 8 mm (Torx 10) are included in the set.
Supply 1 holding clamp, assembly kit
B4308238
Holding clamps产品已添加到关注清单中
lava
B4308600
Carrying case S, right-hand side
Specially designed for CARRYTEC S. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version Right-hand side.
Supply 1 carrying case, left-hand side, assembly kit
B4308600
Carrying case S, right-hand side产品已添加到关注清单中
82x180x65mm
B4308610
Carrying case S, left-hand side
Specially designed for CARRYTEC S. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version Left-hand side.
Supply 1 carrying case, left-hand side, assembly kit
B4308610
Carrying case S, left-hand side产品已添加到关注清单中
82x180x65mm
B4308650
Shoulder strap
Practical shoulder strap with shoulder padding.
Mounting on CARRYTEC enclosures only in conjunction with left and right Carrying cases.
Mounting on CARRYTEC enclosures only in conjunction with left and right Carrying cases.
Supply 1 shoulder strap
B4308650
Shoulder strap产品已添加到关注清单中
1400mm
B4310001
Sealing M
Application: for increasing the protection class, of CARRYTEC M.
Supply 1 sealing
B4310001
Sealing M产品已添加到关注清单中
B4310600
Carrying case M, right-hand side
Specially designed for CARRYTEC M. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version Right-hand side.
Supply 1 carrying case, left-hand side, assembly kit
B4310600
Carrying case M, right-hand side产品已添加到关注清单中
99x214x64mm
B4310610
Carrying case M, left-hand side
Specially designed for CARRYTEC M. Protects enclosure, cables and sensors. Consists of a moulded plastic part and hard-wearing textile fabric, with a practical zip fastener for fast access. Integrated recesses in the sides of the enclosure for connecting instruments, which are then ready for immediate use. Easy to attach to the screwed connection in the enclosure. Eyelet on the top for carrying with the shoulder strap (separate article, see Accessories).
Version Left-hand side.
Supply 1 carrying case, left-hand side, assembly kit
B4310610
Carrying case M, left-hand side产品已添加到关注清单中
99x214x64mm
B4313001
Sealing L
Application: for increasing the protection class, of CARRYTEC L.
Supply 1 sealing
B4313001
Sealing L产品已添加到关注清单中
B4313117
Station L
For secure storage of the enclosure. Can be used on table stand or as wall suspension element. By using it as a wall suspension element the adapter (accessories) is needed. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply 1 base, assembly kit
B4313117
Station L产品已添加到关注清单中
off-white RAL 9002
B4313147
Adapter for Station L
Adapter for mounting Station L on a wall. Supplied with two self-tapping screws for attaching Station L.
Supply 1 adapter and 2 self-tapping screws
B4313147
Adapter for Station L产品已添加到关注清单中
off-white RAL 9002
B4313218
Station L
For secure storage of the enclosure. Can be used on table stand or as wall suspension element. By using it as a wall suspension element the adapter (accessories) is needed. Available with or without base plate (accessory). The enclosure snaps securely into the station. It can be removed easily by pulling the handle. Offers room for charging and data transfer contacts (accessories), interfaces etc.
Supply 1 base, assembly kit
B4313218
Station L产品已添加到关注清单中
lava
B4313248
Adapter for Station L
Adapter for mounting Station L on a wall. Supplied with two self-tapping screws for attaching Station L.
Supply 1 adapter and 2 self-tapping screws
B4313248
Adapter for Station L产品已添加到关注清单中
lava
