DIN 标准导轨接线盒
A9077207
DATEC-CONTROL S, Vers. II
Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).
VersionTop part with maximum sized cutout for display modules
SupplyTop and base part, battery compartment lid, assembly kit
添加到购物车内 
“电池” 配件
A9160003
Plug-in contact, 1 x 9 V (PP3)
Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).
Application: for a 9 V flat battery (PP3).
Supply 1 plug-in contact
A9160003
Plug-in contact, 1 x 9 V (PP3)产品已添加到关注清单中
A9174006
Set of battery clips, 1 x 9 V
For contacting the battery.
Supply 2 single contacts
A9174006
Set of battery clips, 1 x 9 V产品已添加到关注清单中
tin-plated
A9177310
Battery compartment, 1 x 9 V
Application: for 1 x 9 V flat battery (PP3).
Supply 1 battery compartment, assembly kit
A9177310
Battery compartment, 1 x 9 V产品已添加到关注清单中
A9345217
Set of battery compartment, 4 x AA
For 4 x 1.5 V mignon-cells (AA). Complies with DIN EN 60601 (short circuit caused by incorrect insertion of batteries impossible).
Supply 1 battery compartment, battery clips nickel-plated, assembly kit
A9345217
Set of battery compartment, 4 x AA产品已添加到关注清单中
off-white RAL 9002
“底座” 配件
A9177137
Station S
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, slots etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9177137
Station S产品已添加到关注清单中
off-white RAL 9002
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178007
Contacts, male产品已添加到关注清单中
A9199005
Strain relief
Frame for securing the cable on existing supports. Suitable for cable ø approx. 5-7 mm.
Supply 1 strain relief device, 2 screws
A9199005
Strain relief产品已添加到关注清单中
volcano
“保护等级” 附件
A9177001
Display window S
The display window protects the installed display and achieves protection class within the display area. Without printing.
Supply 1 display window, 1 adhesive foil
A9177001
Display window S产品已添加到关注清单中
clear
A9177006
Sealing kit S
Application: for increasing the protection class, of DATEC-CONTROL S.
Supply 1 sealing kit
A9177006
Sealing kit S产品已添加到关注清单中
A9177008
Protector S
Special protector for DATEC-CONTROL S. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Supply 1 protector
A9177008
Protector S产品已添加到关注清单中
volcano
“挂墙支架” 配件
A9226227
Wall suspension element
Wall suspension element for DATEC-MOBIL-BOX M and DATEC-CONTROL S. Two clasps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226227
Wall suspension element产品已添加到关注清单中
off-white RAL 9002
附件
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178008
Contacts, female产品已添加到关注清单中
Customising options for A9077207
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
- 技术数据
-
图纸或资料
- 应用示例
- 采购有关数据
材料
防护等级
Necessary accessories: sealing kit, display window (set with adhesive foil)
颜色
off-white RAL 9002
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
长度
228 mm
宽度
117 mm
高度
47 mm
电路板长度，下盒
214 mm
电路板宽度，下盒
62 mm
电路板长度，上盒
213 mm
电路板宽度，上盒
60 mm
Display length, base
54 mm
Display width, base
79 mm
Keypad length
169.5 mm
Keypad width
59.7 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Assembly Instructions (Part)
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 494 KB
- AutoCAD DWG-File 787 KB
- AutoCAD DXF-File 2,957 KB
- 3 维 PDF 版 （Acrobat Reader 软件） (产品旋转 360°，部件显示或隐藏等功能) 5,637 KB
3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- 00007888.x_t 2,319 KB
- 00007888.STEP 5,337 KB
- 00007888.SAT 7,095 KB
Weight/1 part
193 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Germany
特制机盒:我们可根据您的需求，对我们的机盒和旋钮进行精加工和精款加工。您将得到一个精工完毕可直接安装的机盒，仅需添入电子元件即可使用。 您可以在此处找到以下产品类型款式 A9077207请务必索取报价！