Busca Avançada Código
Entrar Your location/language Alemanha, Português
AltText

Snaptec

Caixas IP 65 com Montagem Rápida

Estas práticas caixas apresentam uma técnica de montagem combinada com encaixe racional para instalação mais rápida do sistema eletrônico/componentes elétricos.

  • modernas caixas de montagem em parede com baixo custo
  • encaixes nas tampas para montagem mais fácil
  • partes altas inferiores garantem máxima superfície de prensa cabos na montagem e nas interfaces
  • rápida desmontagem/manutenção com ferramenta de abertura ou chave de fenda
  • abertura em nylon nos orifícios de acesso para fixação da caixa
  • alta classe de proteção IP 65; vedação da junta pré-montada ao topo
  • tampa recessada para teclado de membrana ou rótulo
  • eixos dos parafusos ocultos para fácil montagem em parede
  • parede externa alternativa para suportes de montagem
  • pilares de parafusos internos para PCBs etc.
  • Exemplos de Aplicação

Application fields

  • Pequenos aparelhos com componentes eletro-técnicos para baixa tensão, por exemplo, potenciômetros, controladores de tempo, unidades codificadas de controle etc
  • Ou aplicações de baixa tensão com componentes eletro-mecânicos por exemplo relés, sob tensão em estreita liberação, fusíveis etc.
  • Além disso, sistemas de automação médicas e domésticas
  • Navegue na Lista Completa
  • Acessórios
  • Customizadas
AltText

C3006061

SNAPTEC 60 x 60 Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.

Supply 1 top and base part with sealing, cover for the locking openings, dismantling key

Fechar

C3006061

SNAPTEC 60 x 60
Produto adicionado a sua lista
ABS (UL 94 HB)
light grey RAL 7035
60x60x40mm
IP 65
AltText

C3006101

SNAPTEC 60 x 100 Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.

Supply 1 top and base part with sealing, covers for the locking openings, dismantling key

Fechar

C3006101

SNAPTEC 60 x 100
Produto adicionado a sua lista
ABS (UL 94 HB)
light grey RAL 7035
60x100x40mm
IP 65
AltText

C3010101

SNAPTEC 100 x 100 Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.

Supply 1 top and base part with sealing, covers for the locking openings, dismantling key

Fechar

C3010101

SNAPTEC 100 x 100
Produto adicionado a sua lista
ABS (UL 94 HB)
light grey RAL 7035
100x100x80mm
IP 65
AltText

A0306031

Self-tapping screws 3 x 6 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Fechar

A0306031

Self-tapping screws 3 x 6 mm (PZ1)
Produto adicionado a sua lista
AltText

C2299028

Wall mounting brackets Elements for exterior wall mounting after assembly of the unit.

Supply 4 pieces including fixing elements

Fechar

C2299028

Wall mounting brackets
Produto adicionado a sua lista
PA 6 (UL 94 HB)
light grey RAL 7035
AltText

C2306917

Pressure equalisation element M6x0.75 Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply 1 pressure equalisation element, 1 seal washer, 1 nut

Fechar

C2306917

Pressure equalisation element M6x0.75
Produto adicionado a sua lista
PA 6 (UL 94 HB)
light grey RAL 7035
IP 56
AltText

C2310917

Pressure equalisation element M10x1 Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply 1 pressure equalisation element, 1 seal washer, 1 nut

Fechar

C2310917

Pressure equalisation element M10x1
Produto adicionado a sua lista
PA 6 (UL 94 HB)
light grey RAL 7035
IP 56
AltText

C2316147

Cable grommet Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 0.5 - 3 mm and for cable diameters from 5 - 10 mm. Operating temperatures from -40°C to +100°C. Borehole ø 16.5 mm.

Supply 1 cable grommet

Fechar

C2316147

Cable grommet
Produto adicionado a sua lista
TPE
light grey RAL 7035
IP 67
AltText

C2320137

Cable grommet Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 1 - 4 mm and for cable diameters from 8 - 13 mm. Operating temperatures from -40°C to +100°C. Borehole ø 20.5 mm.

Supply 1 cable grommet

Fechar

C2320137

Cable grommet
Produto adicionado a sua lista
EPDM
light grey RAL 7035
IP 67
AltText

C2320147

Cable grommet Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 0.5 - 3 mm and for cable diameters from 6 - 13 mm. Operating temperatures from -40°C to +100°C. Borehole ø 20.5 mm.

Supply 1 cable grommet

Fechar

C2320147

Cable grommet
Produto adicionado a sua lista
TPE
light grey RAL 7035
IP 67

Opções para customizadas Snaptec

O que você ainda precisa em seu próprio produto pessoal? Nós podemos fornecer caixas e knobs de ajuste com todas as modificações necessárias para a montagem de seus componentes eletrônicos.