Acessórios para Caixas
A9076157
SET: DATEC-CONTROL XS, Vers. I,station..
Enclosure-kit: DATEC-CONTROL XS, version I with machining for the locator of the 6-pin contacts and secure connection, 1 base XS, 1 male contact (base) and 1 female contact (enclosure).
SupplyBottom and top part without display cutout, battery compartment lid, base, male contact, female contact, assembly kits
Desenho PDF 2D
Visualização PDF 3D
Baixar arquivos 3D/2D
Baixar arquivos 3D/2D
Gerar seu Datasheet em PDF para A9076157
Por favor, selecione os detalhes do produto que você gostaria de incluir ao PDF.
Adicionar ao carrinho 
Accessory "battery"
A9160003
Plug-in contact, 1 x 9 V (PP3)
Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).
Application: for a 9 V flat battery (PP3).
Supply 1 plug-in contact
A9160003
Plug-in contact, 1 x 9 V (PP3)Produto adicionado a sua lista
A9176007
Set of battery clips, 2 x AA
For contacting the batteries. For secure hold of the round cells just glue the attached battery spacer into the enclosure’s battery compartment lid.
Supply 2 single contacts, 1 double contacts, 1 self-adhesive battery spacer
A9176007
Set of battery clips, 2 x AAProduto adicionado a sua lista
nickel-plated
A9176008
Set of battery clips, 3 x AA
For contacting the batteries. For secure hold of the round cells just glue the attached battery spacer into the enclosure’s battery compartment lid.
Supply 1 set incl. 1 self-adhesive battery spacer
A9176008
Set of battery clips, 3 x AAProduto adicionado a sua lista
nickel-plated
A9176128
Battery compartment XS, 2 x AA or 1 x 9V
Suitable for DATEC-CONTROL XS. An add-on battery compartment for 2 x 1.5 V mignon-cells (AA) or 1 x 9 V flat battery (PP3). It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).
Supply 1 battery compartment
A9176128
Battery compartment XS, 2 x AA or 1 x 9VProduto adicionado a sua lista
A9176158
Battery compartment XS, 3 x AA
Suitable for DATEC-CONTROL XS. An add-on battery compartment for 3 x 1.5 V AA batteries (IEC LR6 1.5 V). It is secured without screws. After the upper and lower parts of the case have been mounted, it is held automatically. Set of battery clips (accessory).
Supply 1 battery compartment
A9176158
Battery compartment XS, 3 x AAProduto adicionado a sua lista
off-white RAL 9002
A9250250
Battery spacer
The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.
Supply 1 spacer
A9250250
Battery spacerProduto adicionado a sua lista
50x25x4mm
Accessory "protection"
A9176006
Sealing kit XS
Application: for increasing the protection class, of DATEC-CONTROL XS.
Supply 1 sealing kit
A9176006
Sealing kit XSProduto adicionado a sua lista
Accessory "carrying"
A9100002
Ring eyelet
For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.
Supply 1 ring eyelet
A9100002
Ring eyeletProduto adicionado a sua lista
volcano
Customising options for A9076157
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
- Dados técnicos
-
Desenho / Informações
- Purchasing Data
Material
Protection class
Necessary accessories: sealing kit • Attention: additional proofing of the contacts necessary
Colour
off-white RAL 9002
Standards
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Length
200 mm
Width
94 mm
PCB length, base
190 mm
PCB width, base
46 mm
PCB length, top
150 mm
PCB width, top
47 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Assembly Instructions (Part)
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 309 KB
- AutoCAD DWG-File 715 KB
- AutoCAD DXF-File 2 581 KB
- Visualização PDF 3D (Acrobat Reader) (gira o produto 360°, pode ocultar parte do desenho selecionado pelo mouse, acessórios...) 5 175 KB
3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- 00008207.x_t 5 947 KB
- 00008207.STEP 13 031 KB
- 00008207.SAT 15 669 KB
External Accessory - miscellaneous
Weight/1 part
215 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Alemanha
Serviço de customização: Podemos modificar nossos gabinetes para atender às suas necessidades específicas. Os gabinetes serão entregues totalmente finalizados e prontos para uso. Tudo o que você precisa fazer é instalar seu equipamento no interior. Veja as opções de customização para A9076157 e não se esqueça de solicitar uma cotação!