Minimum components
1 knob.
1 cover.
1 assembly kit flush-fitting version.
1 LED illumination.
System components to complete
B8641008
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641009
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8641108
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641109
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8741118
Assembly kit 41, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 41. Optional illumination possible only in conjunction with the translucent knob (colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 41, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8741119
Assembly kit 41, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 41. Optional illumination possible only in conjunction with the translucent knob (colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 41, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
nero
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
B8733004
LED illumination kit
PCB D = 27 mm with 8 LEDs (white light), SMD-technology, connecting cable 120 mm long, 2-pin connector at the end, incl. PCB connector. Universally applicable for knob sizes 33 and 41 mm.
Recommended for flush-fitting version: only in conjunction with the translucent* knob.
Recommended for surface-mounted version: only in conjunction with the translucent* assembly kit.
(*translucent = colours diamond, ruby, emerald, sapphire).
Supply
1 LED illumination kit
Zavřít
LED illumination kit
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8741001
Assembly support 41
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 41
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Minimum components
1 knob.
1 cover.
1 assembly kit flush-fitting version.
System components to complete
B8641008
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641009
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8641108
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641109
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8741118
Assembly kit 41, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 41. Optional illumination possible only in conjunction with the translucent knob (colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 41, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8741119
Assembly kit 41, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter 41. Optional illumination possible only in conjunction with the translucent knob (colours diamond, ruby, emerald or sapphire).
Supply
1 assembly kit
Zavřít
Assembly kit 41, flush fitting version
Produkt byl přidán do Vašeho košíku.
PA 6
nero
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8741001
Assembly support 41
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 41
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Minimum components
1 knob.
1 cover.
1 assembly kit surface-mounted version.
1 LED illumination.
System components to complete
B8641008
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641009
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8641108
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641109
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8741201
Assembly kit 41, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 41. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 41, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
diamond
B8741206
Assembly kit 41, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 41. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 41, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
saphire
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
B8733004
LED illumination kit
PCB D = 27 mm with 8 LEDs (white light), SMD-technology, connecting cable 120 mm long, 2-pin connector at the end, incl. PCB connector. Universally applicable for knob sizes 33 and 41 mm.
Recommended for flush-fitting version: only in conjunction with the translucent* knob.
Recommended for surface-mounted version: only in conjunction with the translucent* assembly kit.
(*translucent = colours diamond, ruby, emerald, sapphire).
Supply
1 LED illumination kit
Zavřít
LED illumination kit
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8741001
Assembly support 41
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 41
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Minimum components
1 knob.
1 cover.
1 assembly kit surface-mounted version.
System components to complete
B8641008
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641009
Cover 41
Suitable for STAR-KNOB 41. Cover simply to pin up.
Supply
1 cover
Zavřít
Cover 41
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8641108
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8641109
Cover 41, with finger recess
Suitable for STAR-KNOB 41. Cover with finger grip simply to pin up.
Supply
1 cover
Zavřít
Cover 41, with finger recess
Produkt byl přidán do Vašeho košíku.
PA 6
nero
B8741201
Assembly kit 41, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 41. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 41, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
diamond
B8741206
Assembly kit 41, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 41. Optional illumination possible, please order LED illumination separately.
Supply
1 assembly kit
Zavřít
Assembly kit 41, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PC
(UL 94 HB)
saphire
B8741218
Assembly kit 41, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 41.
Supply
1 assembly kit
Zavřít
Assembly kit 41, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PA 6
volcano
B8741219
Assembly kit 41, surface-mounted version
Surface-Mounted version. For raised installation. Suitable for knob diameter 41.
Supply
1 assembly kit
Zavřít
Assembly kit 41, surface-mounted version
Produkt byl přidán do Vašeho košíku.
PA 6
nero
Accessory "illumination"
B7546001
LED illumination kit, 8 LEDs (RGB backlight)
Board D=27 mm with 8 LEDs (RGB backlight), without controller, SMD technology, connecting cable 120 mm long, 4-pin socket at the end, incl. connector.
Recommended for:
STAR-KNOBS 33 / 41
- flush-fitting version: only in conjunction with the diamond knob
- surface-mounted version: only in conjunction with the diamond assembly kit
CONTROL-KNOBS 36 with optional illumination
- installation in the bases available as accessories
Supply
1 LED illumination kit (RGB backlight)
Zavřít
LED illumination kit, 8 LEDs (RGB backlight)
Produkt byl přidán do Vašeho košíku.
Accessory
A6207009
Round nut M7 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M7 x 0.75
Produkt byl přidán do Vašeho košíku.
A6210009
Round nut M10 x 0.75
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut M10 x 0.75
Produkt byl přidán do Vašeho košíku.
A6295009
Round nut 3/8"-32G
For fixing the potentiometers at front panels.
Suitable for
- round and wing knobs ø 10 - 16 with nut cover,
- round knobs ø 20 - 50 without nut cover,
- spindle-shaped knobs ø 16 - 40 with nut cover,
- Com-Knobs ø 16 - 50,
- Top-Knobs ø 20 - 40,
- Star-Knobs ø 33 & 41 and
- Control-Knobs ø 36 & 46.
Supply
1 round nut
Zavřít
Round nut 3/8"-32G
Produkt byl přidán do Vašeho košíku.
A6300000
Spanner
For tightening the round nut.
Supply
1 spanner
Zavřít
Spanner
Produkt byl přidán do Vašeho košíku.
B8741001
Assembly support 41
Holds the knob when tightening the collet (flush-fitting variant) and positions it in the correct height on the axis of rotary pulse generators (flush-fitting and surface-mounted variant).
Supply
1 assembly support
Zavřít
Assembly support 41
Produkt byl přidán do Vašeho košíku.
ABS
(UL 94 HB)
green
Customising options for B8341065
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
DIN modulární skříňka
Přidat do košíku 
