DIN modulární skříňka
A9079109
DATEC-CONTROL L, Vers. I
Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.
VersionWith closed operating area, recessed: 1.7 mm deep
SupplyTop and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet
2D PDF Zobrazení
3D PDF Zobrazení
3D/2D ke stažení
3D/2D ke stažení
Generovat PDF pro A9079109
Vyberte prosím podrobnosti o produktu, které chcete zahrnout do PDF.
Přidat do košíku 
Accessory "battery"
A9178118
Battery compartment holder
Enables the mounting of a battery compartment in the station and case. For mounting the battery compartment holder there are two positions possible-according to local requirements and configuration of components.
Supply 1 battery compartment holder, set of battery clips for connection to versions I and II battery compartment, 2 fixing screws
A9178118
Battery compartment holderProdukt byl přidán do Vašeho košíku.
volcano
A9178128
Battery compartment, M/L, 4 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version For 4 mignon cells 1.5 V (AA)
Supply 1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
A9178128
Battery compartment, M/L, 4 x AAProdukt byl přidán do Vašeho košíku.
volcano
A9178158
Battery compartment, M/L, 5 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version For 5 mignon cells 1.5 V (AA)
Supply 1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
A9178158
Battery compartment, M/L, 5 x AAProdukt byl přidán do Vašeho košíku.
volcano
A9178178
End plate for electronic area, Vers. I
Simply inserted into the guides in the bottom part.
Version To close the electronic area
Supply 1 end plate for electronic area
A9178178
End plate for electronic area, Vers. IProdukt byl přidán do Vašeho košíku.
volcano
A9178188
End plate for electronic area, Vers. II
Simply inserted into the guides in the bottom part.
Version For use with a PCMCIA-card type I
Supply 1 end plate for electronic area
A9178188
End plate for electronic area, Vers. IIProdukt byl přidán do Vašeho košíku.
volcano
A9178198
End plate for electronic area, Vers. III
Simply inserted into the guides in the bottom part.
Version For use with a PCMCIA-card type I
Supply 1 end plate for electronic area
A9178198
End plate for electronic area, Vers. IIIProdukt byl přidán do Vašeho košíku.
volcano
Accessory "station"
A9178118
Battery compartment holder
Enables the mounting of a battery compartment in the station and case. For mounting the battery compartment holder there are two positions possible-according to local requirements and configuration of components.
Supply 1 battery compartment holder, set of battery clips for connection to versions I and II battery compartment, 2 fixing screws
A9178118
Battery compartment holderProdukt byl přidán do Vašeho košíku.
volcano
A9178128
Battery compartment, M/L, 4 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version For 4 mignon cells 1.5 V (AA)
Supply 1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
A9178128
Battery compartment, M/L, 4 x AAProdukt byl přidán do Vašeho košíku.
volcano
A9178139
Station, Vers. I
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version Desktop version
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, non-slip pads
A9178139
Station, Vers. IProdukt byl přidán do Vašeho košíku.
black RAL 9005
A9178158
Battery compartment, M/L, 5 x AA
Used in combination with the battery compartment holder in the case and in the station. Secure snap-in machanism.
Version For 5 mignon cells 1.5 V (AA)
Supply 1 battery compartment, 1 battery lid, 1 set of battery clips, 1 screw
A9178158
Battery compartment, M/L, 5 x AAProdukt byl přidán do Vašeho košíku.
volcano
A9178169
Station, Vers. II
Ergonomically inclined position allows convenient reading of data. Offers additional space for charging electronics, another battery compartment, slots, printing devise etc.
Version Wall-mounting
Supply 1 station, 1 bottom plate, fixing screws for the bottom plate and PCB, covers, locking mechanism
A9178169
Station, Vers. IIProdukt byl přidán do Vašeho košíku.
black RAL 9005
Accessory "protection"
A9179006
Sealing kit L
Application: for increasing the protection class, of DATEC-CONTROL L.
Supply 1 sealing kit
A9179006
Sealing kit LProdukt byl přidán do Vašeho košíku.
A9179108
Protector L
Special protector for DATEC-CONTROL L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version without hanging belt.
Supply 1 protector
A9179108
Protector LProdukt byl přidán do Vašeho košíku.
volcano
A9179208
Protector L
Special protector for DATEC-CONTROL L. Absorbs shocks and so protects the electronics in the case. Ideal also as a surface protector for peripheral equipment, appliances etc. Simple assembly through the use of a special elastomer.
Version with shoulder strap (approx. 1800 x 20 mm, black, with push-in buckle).
Supply 1 protector, 1 shoulder strap
A9179208
Protector LProdukt byl přidán do Vašeho košíku.
volcano
Accessory "wall/holder"
A9226119
Wall suspension element
Two claps, which encompass the case laterally will be locked with the bars. The adjustment of the corresponding width will be carried out by a locking solution at the holder's rear. Finally it can be mounted to the wall.
Supply 2 claps, 2 bars, 1 holder
A9226119
Wall suspension elementProdukt byl přidán do Vašeho košíku.
black RAL 9005
Accessory
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply 1 contact
A9178008
Contacts, femaleProdukt byl přidán do Vašeho košíku.
Customising options for A9079109
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
- Technická data
-
Nákresy / Info
- Příklady aplikací
- Kupní data
Materiál
Třída produktu
Necessary accessories: sealing kit
Barva
black RAL 9005
Standards
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Délka
266 mm
Šířka
144 mm
Výška
60 mm
PCB length, base
230 mm
PCB width, base
80 mm
PCB length, top
115 mm
PCB width, top
78 mm
Keypad length
209,9 mm
Keypad width
77,8 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Assembly Instructions (Part)
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 289 KB
- AutoCAD DWG-File 620 KB
- AutoCAD DXF-File 2 359 KB
- 3D PDF (Acrobat Reader) (otočte produkt o 360°, zrušte zobrazení komponentů pro náhled z vnitřní strany…) 8 553 KB
3D-Models (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- 00007904.x_t 9 789 KB
- 00007904.STEP 21 561 KB
- 00007904.SAT 33 587 KB
External Accessory - miscellaneous
Weight/1 part
295 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Germany
Možnosti úprav: Zapouzdření můžeme upravit tak, aby vyhovovala Vašim specifickým požadavkům. Zapouzdření dodáme kompletně dokončená a připravená k použití. Už bude zbývat pouze instalace Vašich součástek nebo elektroniky. Prohlédněte si možnosti úprav pro A9079109 a nezapomeňte si vyžádat nabídku!