至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个电池盒及盒盖
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板).
1 个电池盒及盒盖.
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4146047
Battery compartment and lid L, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
关闭
Battery compartment and lid L, 5 x AA
ABS
(UL 94 HB)
off-white RAL 9002
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
附件
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, male
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, female
gold-plated
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 块底板带手槽
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板).
1 块带手槽 底板
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
B4146167
Bottom panel with handle recess L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
关闭
Bottom panel with handle recess L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
附件
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, male
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, female
gold-plated
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个电池盒及盒盖或 带手槽底板
1 充电站 – 底座、机盒放置架 –
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 个电池盒及盒盖或带手槽底板
1 充电站 – 底座、机盒放置架 –
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046837
Base L - charging station, case deposit mobile
Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.
Supply
1 base, 1 base cover, 2 covers, assembly kit
关闭
Base L - charging station, case deposit mobile
ABS
(UL 94 HB)
off-white RAL 9002
183x183x80mm
B4146047
Battery compartment and lid L, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
关闭
Battery compartment and lid L, 5 x AA
ABS
(UL 94 HB)
off-white RAL 9002
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
B4146167
Bottom panel with handle recess L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
关闭
Bottom panel with handle recess L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
附件
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, male
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, female
gold-plated
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个电池盒及盒盖或 1块带手槽底板
1 个挂墙安装支架
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 个电池盒及盒盖或1块带手槽底板
1 个挂墙安装支架
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4146047
Battery compartment and lid L, 5 x AA
Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.
Supply
1 battery compartment and lid, assembly kit
关闭
Battery compartment and lid L, 5 x AA
ABS
(UL 94 HB)
off-white RAL 9002
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
B4146167
Bottom panel with handle recess L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, assembly kit
关闭
Bottom panel with handle recess L
ABS
(UL 94 HB)
off-white RAL 9002
B4146247
Wall suspension element L
Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.
Supply
1 wall suspension element with snap-in mechanism
关闭
Wall suspension element L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
附件
A9178007
Contacts, male
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, male
gold-plated
A9178008
Contacts, female
Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.
Supply
1 contact
关闭
Contacts, female
gold-plated
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1 个底座 – 倾斜坐 –
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 个底座 – 倾斜坐 –
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046827
Base L - desk-top -
Assembly unit: for case combinations with open bottom part vers. I or II. Case screwed to base. Assembly screws hidden from view. Ergonomically designed for operating and reading off. Assembly of the operating panel vertically or horizontally, depending on the application, see assembly instruction.
Supply
1 base, 2 covers, assembly kit
关闭
Base L - desk-top -
ABS
(UL 94 HB)
off-white RAL 9002
183x183x73mm
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒或铝材质前面板)
1块带卡扣条底板
1 个底座 – 倾斜坐 / 墙挂坐 –
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1块带卡扣条底板
1 个底座 – 倾斜坐 / 墙挂坐 –
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046847
Base L - desk-top/wall -
Assembly unit: for case combinations with bottom panel and snap-in strips. Case snaps into the base in vertical or horizontal position, depending on the application - see assembly instruction. If required, unit can be secured by latch lock. Ergonomically designed for operating and reading off. Direct wall mounting.
Supply
1 base, 2 clips, assembly kit
关闭
Base L - desk-top/wall -
ABS
(UL 94 HB)
off-white RAL 9002
183x183x73mm
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
B4146257
Bottom panel with snap-in strips L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, 2 snap-in strips, assembly kit
关闭
Bottom panel with snap-in strips L
ABS
(UL 94 HB)
off-white RAL 9002
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
至少组件 (相对单件)
1 个下盒，型式 I
1 款视面 (上盒)
1 块底板
1 套安装组件
或
1 个下盒，型式 II
1 款视面 ( ABS 塑料视面板或玻璃板)
1 块底板
1 套安装组件
系统组件使产品完整
B4046407
Cover L
Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.
Supply
1 cover, assembly kit
关闭
Cover L
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4046427
Cover L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for Type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 top part, 2 attachment strips, 2 assembly kits (iPad is not included)
关闭
Cover L, for iPad Air
ABS
(UL 94 HB)
off-white RAL 9002
275x195x25.5mm
B4146106
Front panel L
Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.
Supply
1 front panel, assembly kit
关闭
Front panel L
Aluminium
matt anodised
271.5x191.5x2mm
B4146126
Front panel L, for iPad Air
With preparation and fixing material for installing an iPad Air. This module is suitable for type I bottom parts. Protection class with iPad installed max. IP40. We can also offer the option of installing other smaller tablets in our enclosures in this way.
Supply
1 front panel, 2 attachment strips, 1 assembly kits (iPad is not included)
关闭
Front panel L, for iPad Air
Aluminium
matt anodised
275.4x195.4x4mm
B4146257
Bottom panel with snap-in strips L
Assembly unit: suitable for bottom part vers. I and II, screw fixing.
Supply
1 bottom panel, 2 snap-in strips, assembly kit
关闭
Bottom panel with snap-in strips L
ABS
(UL 94 HB)
off-white RAL 9002
B4146587
Installation assembly kit L, flat
For the installation of the INTERFACE-TERMINAL enclosure in walls, in front panels, machines or systems. Can only be used in conjunction with bottom panel or open rear side of enclosure. Easy installation: Mount holders on the fully assembled enclosure. Place the enclosure with holders in the wall/front panel and align it. Mark and drill mounting holes. Then bolt the enclosure with the holders from the front and push on the design frame.
Version
Holders matches bottom part, flat
Supply
4 holders, assembly kit, design frame
关闭
Installation assembly kit L, flat
ABS
(UL 94 HB)
off-white RAL 9002
325x251mm
“保护等级” 附件
B4146005
Sealing L (bottom part - front design)
For a higher protection class. Suitable between bottom part and front design (cover / aluminium front panel / ABS front panel or glass panel).
Supply
1 sealing
关闭
Sealing L (bottom part - front design)
SEBS (TPE)
B4146006
Sealing L (bottom part - base/bot. panel/bat. comp...)
For a higher protection class. Suitable between
- bottom part and base / bottom panel / battery compartment respectively
- base and base cover (station for charging station, case deposit mobile).
Supply
1 sealing
关闭
Sealing L (bottom part - base/bot. panel/bat. comp...)
SEBS (TPE)
Customising options for B4046707
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
DIN 标准导轨接线盒
添加到购物车内 
