Pokročilé vyhledávání Číslo součástky
Přihlásit se / Registrovat Vaše země/jazyk Germany, Čeština
C2299028 Wall mounting brackets

C2299028

Wall mounting brackets

Elements for exterior wall mounting after assembly of the unit.

Supply

4 pieces including fixing elements

  • To be used for
C0080801 Case shell 80, with groove

C0080801

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0080801

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
80x80x20mm
C0080802 Case shell 80, with groove

C0080802

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0080802

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
80x80x20mm
C0081201 Case shell 80, with groove

C0081201

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0081201

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x80x20mm
C0081202 Case shell 80, with groove

C0081202

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0081202

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x80x20mm
C0081601 Case shell 80, with groove

C0081601

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0081601

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x80x20mm
C0081602 Case shell 80, with groove

C0081602

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0081602

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x80x20mm
C0082401 Case shell 80, with groove

C0082401

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0082401

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x80x20mm
C0082402 Case shell 80, with groove

C0082402

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C0082402

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x80x20mm
C0121201 Case shell 120, with tongue

C0121201

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0121201

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x120x30mm
C0121202 Case shell 120, with tongue

C0121202

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0121202

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x120x30mm
C0122001 Case shell 120, with tongue

C0122001

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0122001

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
200x120x30mm
C0122002 Case shell 120, with tongue

C0122002

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0122002

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
200x120x30mm
C0122401 Case shell 120, with tongue

C0122401

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0122401

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x120x30mm
C0122402 Case shell 120, with tongue

C0122402

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0122402

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x120x30mm
C0161601 Case shell 160, with tongue

C0161601

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0161601

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x160x30mm
C0161602 Case shell 160, with tongue

C0161602

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0161602

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x160x30mm
C0162401 Case shell 160, with tongue

C0162401

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0162401

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x30mm
C0162402 Case shell 160, with tongue

C0162402

Case shell 160, with tongue Case shell with thread and fixing towers as separate part.´Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C0162402

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x30mm
C1080801 Case shell 80, with tongue

C1080801

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1080801

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
80x80x40mm
C1080802 Case shell 80, with tongue

C1080802

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1080802

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
80x80x40mm
C1081201 Case shell 80, with tongue

C1081201

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1081201

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x80x40mm
C1081202 Case shell 80, with tongue

C1081202

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1081202

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x80x40mm
C1081601 Case shell 80, with tongue

C1081601

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1081601

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x80x40mm
C1081602 Case shell 80, with tongue

C1081602

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1081602

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x80x40mm
C1082401 Case shell 80, with tongue

C1082401

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1082401

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x80x40mm
C1082402 Case shell 80, with tongue

C1082402

Case shell 80, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1082402

Case shell 80, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x80x40mm
C1121201 Case shell 120, with groove

C1121201

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1121201

Case shell 120, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x120x30mm
C1121202 Case shell 120, with groove

C1121202

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1121202

Case shell 120, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x120x30mm
C1122001 Case shell 120, with groove

C1122001

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1122001

Case shell 120, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
200x120x30mm
C1122002 Case shell 120, with groove

C1122002

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1122002

Case shell 120, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
200x120x30mm
C1122401 Case shell 120, with groove

C1122401

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1122401

Case shell 120, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x120x30mm
C1122402 Case shell 120, with groove

C1122402

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1122402

Case shell 120, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x120x30mm
C1161601 Case shell 160, with groove

C1161601

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1161601

Case shell 160, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x160x30mm
C1161602 Case shell 160, with groove

C1161602

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1161602

Case shell 160, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x160x30mm
C1162401 Case shell 160, with groove

C1162401

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1162401

Case shell 160, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x30mm
C1162402 Case shell 160, with groove

C1162402

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C1162402

Case shell 160, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x30mm
C1203001 Case shell 200, with tongue

C1203001

Case shell 200, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1203001

Case shell 200, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x40mm
C1243601 Case shell 240, with tongue

C1243601

Case shell 240, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C1243601

Case shell 240, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x40mm
C2008081 ROBUST-BOX WIDTH 80, Vers. I

C2008081

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealeing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008081

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
80x80x60mm
IP 66
C2008082 ROBUST-BOX WIDTH 80, Vers. II

C2008082

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008082

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
80x80x60mm
IP 66
C2008121 ROBUST-BOX WIDTH 80, Vers. I

C2008121

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008121

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x80x60mm
IP 66
C2008122 ROBUST-BOX WIDTH 80, Vers. II

C2008122

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008122

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x80x60mm
IP 66
C2008161 ROBUST-BOX WIDTH 80, Vers. I

C2008161

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008161

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x80x60mm
IP 66
C2008162 ROBUST-BOX WIDTH 80, Vers. II

C2008162

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008162

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x80x60mm
IP 66
C2008241 ROBUST-BOX WIDTH 80, Vers. I

C2008241

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008241

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x80x60mm
IP 66
C2008242 ROBUST-BOX WIDTH 80, Vers. II

C2008242

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2008242

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x80x60mm
IP 66
C2012121 ROBUST-BOX WIDTH 120, Vers. I

C2012121

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2012121

ROBUST-BOX WIDTH 120, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x120x60mm
IP 66
C2012122 ROBUST-BOX WIDTH 120, Vers. II

C2012122

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2012122

ROBUST-BOX WIDTH 120, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x120x60mm
IP 66
C2012201 ROBUST-BOX WIDTH 120, Vers. I

C2012201

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2012201

ROBUST-BOX WIDTH 120, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
200x120x60mm
IP 66
C2012202 ROBUST-BOX WIDTH 120, Vers. II

C2012202

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2012202

ROBUST-BOX WIDTH 120, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
200x120x60mm
IP 66
C2012241 ROBUST-BOX WIDTH 120, Vers. I

C2012241

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2012241

ROBUST-BOX WIDTH 120, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x120x60mm
IP 66
C2012242 ROBUST-BOX WIDTH 120, Vers, II

C2012242

ROBUST-BOX WIDTH 120, Vers, II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2012242

ROBUST-BOX WIDTH 120, Vers, II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x120x60mm
IP 66
C2016161 ROBUST-BOX WIDTH 160, Vers. I

C2016161

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2016161

ROBUST-BOX WIDTH 160, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x160x60mm
IP 66
C2016162 ROBUST-BOX WIDTH 160, Vers. II

C2016162

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2016162

ROBUST-BOX WIDTH 160, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x160x60mm
IP 66
C2016241 ROBUST-BOX WIDTH 160, Vers. I

C2016241

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2016241

ROBUST-BOX WIDTH 160, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x60mm
IP 66
C2016242 ROBUST-BOX WIDTH 160, Vers. II

C2016242

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2016242

ROBUST-BOX WIDTH 160, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x60mm
IP 66
C2080801 Case shell 80, with groove

C2080801

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2080801

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
80x80x40mm
C2080802 Case shell 80, with groove

C2080802

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2080802

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
80x80x40mm
C2081201 Case shell 80, with groove

C2081201

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2081201

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x80x40mm
C2081202 Case shell 80, with groove

C2081202

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2081202

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x80x40mm
C2081601 Case shell 80, with groove

C2081601

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2081601

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x80x40mm
C2081602 Case shell 80, with groove

C2081602

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2081602

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x80x40mm
C2082401 Case shell 80, with groove

C2082401

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2082401

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x80x40mm
C2082402 Case shell 80, with groove

C2082402

Case shell 80, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2082402

Case shell 80, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x80x40mm
C2108081 ROBUST-BOX WIDTH 80, Vers. I

C2108081

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and botttom, assembly kit

Zavřít

C2108081

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
80x80x80mm
IP 66
C2108082 ROBUST-BOX WIDTH 80, Vers. II

C2108082

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108082

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
80x80x80mm
IP 66
C2108121 ROBUST-BOX WIDTH 80, Vers. I

C2108121

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108121

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x80x80mm
IP 66
C2108122 ROBUST-BOX WIDTH 80, Vers. II

C2108122

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108122

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x80x80mm
IP 66
C2108161 ROBUST-BOX WIDTH 80, Vers. I

C2108161

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108161

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x80x80mm
IP 66
C2108162 ROBUST-BOX WIDTH 80, Vers. II

C2108162

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108162

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x80x80mm
IP 66
C2108241 ROBUST-BOX WIDTH 80, Vers. I

C2108241

ROBUST-BOX WIDTH 80, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108241

ROBUST-BOX WIDTH 80, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x80x80mm
IP 66
C2108242 ROBUST-BOX WIDTH 80, Vers. II

C2108242

ROBUST-BOX WIDTH 80, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2108242

ROBUST-BOX WIDTH 80, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x80x80mm
IP 66
C2112121 ROBUST-BOX WIDTH 120, Vers. I

C2112121

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2112121

ROBUST-BOX WIDTH 120, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x120x90mm
IP 66
C2112122 ROBUST-BOX WIDTH 120, Vers. II

C2112122

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2112122

ROBUST-BOX WIDTH 120, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x120x90mm
IP 66
C2112201 ROBUST-BOX WIDTH 120, Vers. I

C2112201

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2112201

ROBUST-BOX WIDTH 120, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
200x120x90mm
IP 66
C2112202 ROBUST-BOX WIDTH 120, Vers. II

C2112202

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2112202

ROBUST-BOX WIDTH 120, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
200x120x90mm
IP 66
C2112241 ROBUST-BOX WIDTH 120, Vers. I

C2112241

ROBUST-BOX WIDTH 120, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2112241

ROBUST-BOX WIDTH 120, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x120x90mm
IP 66
C2112242 ROBUST-BOX WIDTH 120, Vers. II

C2112242

ROBUST-BOX WIDTH 120, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2112242

ROBUST-BOX WIDTH 120, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x120x90mm
IP 66
C2116161 ROBUST-BOX WIDTH 160, Vers. I

C2116161

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2116161

ROBUST-BOX WIDTH 160, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x160x90mm
IP 66
C2116162 ROBUST-BOX WIDTH 160, Vers. II

C2116162

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2116162

ROBUST-BOX WIDTH 160, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x160x90mm
IP 66
C2116241 ROBUST-BOX WIDTH 160, Vers. I

C2116241

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2116241

ROBUST-BOX WIDTH 160, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x90mm
IP 66
C2116242 ROBUST-BOX WIDTH 160, Vers. II

C2116242

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2116242

ROBUST-BOX WIDTH 160, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x90mm
IP 66
C2120301 ROBUST-BOX WIDTH 200, Vers. I

C2120301

ROBUST-BOX WIDTH 200, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2120301

ROBUST-BOX WIDTH 200, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x80mm
IP 66
C2121201 Case shell 120, with tongue

C2121201

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2121201

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
120x120x60mm
C2121202 Case shell 120, with tongue

C2121202

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2121202

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
120x120x60mm
C2122001 Case shell 120, with tongue

C2122001

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2122001

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
200x120x60mm
C2122002 Case shell 120, with tongue

C2122002

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2122002

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
200x120x60mm
C2122401 Case shell 120, with tongue

C2122401

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2122401

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x120x60mm
C2122402 Case shell 120, with tongue

C2122402

Case shell 120, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2122402

Case shell 120, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x120x60mm
C2124361 ROBUST-BOX WIDTH 240, Vers. I

C2124361

ROBUST-BOX WIDTH 240, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2124361

ROBUST-BOX WIDTH 240, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x80mm
IP 66
C2161601 Case shell 160, with tongue

C2161601

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2161601

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
160x160x60mm
C2161602 Case shell 160, with tongue

C2161602

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2161602

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
160x160x60mm
C2162401 Case shell 160, with tongue

C2162401

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2162401

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x60mm
C2162402 Case shell 160, with tongue

C2162402

Case shell 160, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C2162402

Case shell 160, with tongue
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x60mm
C2203001 Case shell 200, with groove

C2203001

Case shell 200, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2203001

Case shell 200, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x40mm
C2243601 Case shell 240, with groove

C2243601

Case shell 240, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C2243601

Case shell 240, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x40mm
C2416241 ROBUST-BOX WIDTH 160, Vers. I

C2416241

ROBUST-BOX WIDTH 160, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2416241

ROBUST-BOX WIDTH 160, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x120mm
IP 66
C2416242 ROBUST-BOX WIDTH 160, Vers. II

C2416242

ROBUST-BOX WIDTH 160, Vers. II Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2416242

ROBUST-BOX WIDTH 160, Vers. II
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x120mm
IP 66
C2420301 ROBUST-BOX WIDTH 200, Vers. I

C2420301

ROBUST-BOX WIDTH 200, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2420301

ROBUST-BOX WIDTH 200, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x120mm
IP 66
C2424361 ROBUST-BOX WIDTH 240, Vers. I

C2424361

ROBUST-BOX WIDTH 240, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2424361

ROBUST-BOX WIDTH 240, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x120mm
IP 66
C2520301 ROBUST-BOX WIDTH 200, Vers. I

C2520301

ROBUST-BOX WIDTH 200, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Lid fixing outside of sealed area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2520301

ROBUST-BOX WIDTH 200, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x160mm
IP 66
C2524361 ROBUST-BOX WIDTH 240, Vers. I

C2524361

ROBUST-BOX WIDTH 240, Vers. I Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.

Supply 2 case shells with sealing, cover strips top and bottom, assembly kit

Zavřít

C2524361

ROBUST-BOX WIDTH 240, Vers. I
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x160mm
IP 66
C3006061 SNAPTEC 60 x 60

C3006061

SNAPTEC 60 x 60 Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.

Supply 1 top and base part with sealing, cover for the locking openings, dismantling key

Zavřít

C3006061

SNAPTEC 60 x 60
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
60x60x40mm
IP 65
C3006101 SNAPTEC 60 x 100

C3006101

SNAPTEC 60 x 100 Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.

Supply 1 top and base part with sealing, covers for the locking openings, dismantling key

Zavřít

C3006101

SNAPTEC 60 x 100
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
60x100x40mm
IP 65
C3010101 SNAPTEC 100 x 100

C3010101

SNAPTEC 100 x 100 Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.

Supply 1 top and base part with sealing, covers for the locking openings, dismantling key

Zavřít

C3010101

SNAPTEC 100 x 100
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
100x100x80mm
IP 65
C3162401 Case shell 160, with groove

C3162401

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C3162401

Case shell 160, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
240x160x60mm
C3162402 Case shell 160, with groove

C3162402

Case shell 160, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C3162402

Case shell 160, with groove
Produkt byl přidán do Vašeho košíku.
PC (UL 94 HB)
light grey RAL 7035
240x160x60mm
C4203001 Case shell 200, with tongue

C4203001

Case shell 200, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C4203001

Case shell 200, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x80mm
C4243601 Case shell 240, with tongue

C4243601

Case shell 240, with tongue Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with tongue

Zavřít

C4243601

Case shell 240, with tongue
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x80mm
C5203001 Case shell 200, with groove

C5203001

Case shell 200, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C5203001

Case shell 200, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
300x200x80mm
C5243601 Case shell 240, with groove

C5243601

Case shell 240, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.

Supply 1 case shell with groove

Zavřít

C5243601

Case shell 240, with groove
Produkt byl přidán do Vašeho košíku.
ABS (UL 94 HB)
light grey RAL 7035
360x240x80mm
  • Technická data
  • Drawings / Info
  • Kupní data
Barva
light grey RAL 7035
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.

Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN EN 16742)

Weight/1 part
11 g
Customs tariff number
(OKW product)
39269097
Country of manufacture
Germany