DIN modulární skříňka
C7016014
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
2D PDF Zobrazení
3D/2D ke stažení
3D/2D ke stažení
Generovat PDF pro C7016014
Vyberte prosím podrobnosti o produktu, které chcete zahrnout do PDF.
Přidat do košíku 
Accessory "protection"
C2306917
Pressure equalisation element M6x0.75
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalisation element, 1 seal washer, 1 nut
C2306917
Pressure equalisation element M6x0.75Produkt byl přidán do Vašeho košíku.
light grey RAL 7035
C2310917
Pressure equalisation element M10x1
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
Supply 1 pressure equalisation element, 1 seal washer, 1 nut
C2310917
Pressure equalisation element M10x1Produkt byl přidán do Vašeho košíku.
light grey RAL 7035
C7100128
Security kit
To secure the enclosure against unauthorised access.
Supply 1 security kit
C7100128
Security kitProdukt byl přidán do Vašeho košíku.
Accessory "wall/holder"
C7100092
Wall-mounting brackets
Wall-mounting brackets made of plastic for external wall mounting. Installation above, below or laterally, as required.
Supply 4 wall-mounting brackets incl. fasteners
C7100092
Wall-mounting bracketsProdukt byl přidán do Vašeho košíku.
Accessory "screws"
C7100167
Screw 3.9 x 9 mm
For fitting standard DIN rails, mounting plates, PCBs, components etc.
Supply 1 self-tapping screw
C7100167
Screw 3.9 x 9 mmProdukt byl přidán do Vašeho košíku.
Accessory
C7113056
Mounting plate
Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.
Supply 1 mounting plate
C7113056
Mounting plateProdukt byl přidán do Vašeho košíku.
C7113077
Standard DIN rail, Type TH 35
Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.
Supply 1 standard DIN rail TH 35
C7113077
Standard DIN rail, Type TH 35Produkt byl přidán do Vašeho košíku.
144x35x7,5mm
C7113087
Standard DIN rail, Type TH 15
Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.
Supply 1 standard DIN rail TH 15
C7113087
Standard DIN rail, Type TH 15Produkt byl přidán do Vašeho košíku.
144x15x5,5mm
Customising options for C7016014
What else do you need to create your own personal product? We can supply our enclosures and tuning knobs fully modified to suit your electronic components and design requirements. Please advise for anything else we can do for you.
- Technická data
-
Nákresy / Info
- Kupní data
Materiál
Třída produktu
,
,
Barva
Bottom part
light grey RAL 7035,
Top part transparent
Top part transparent
Standards
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Délka
162 mm
Šířka
82 mm
Výška
55 mm
PCB length, base
131 mm
PCB width, base
73 mm
Keypad length
137,85 mm
Keypad width
57,85 mm
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Drawings (Discrepancies depend on material-specific manufacturing tolerances, e.g. DIN ISO 20457)
- PDF-File (without registration) 337 KB
- AutoCAD DWG-File 735 KB
- AutoCAD DXF-File 2 776 KB
Weight/1 part
202 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Other country
Možnosti úprav: Zapouzdření můžeme upravit tak, aby vyhovovala Vašim specifickým požadavkům. Zapouzdření dodáme kompletně dokončená a připravená k použití. Už bude zbývat pouze instalace Vašich součástek nebo elektroniky. Prohlédněte si možnosti úprav pro C7016014 a nezapomeňte si vyžádat nabídku!