请选择所需的产品类型或尺寸，或点击产品列表末尾的“选择所有产品”按键。
B4013617
Cover S
Suitable for DATEC-TERMINAL S. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.
Supply
1 cover, assembly kit
关闭
Cover S
ABS
(UL 94 HB)
off-white RAL 9002
130x180x23mm
B4013621
Cover S
Suitable for DATEC-TERMINAL S. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.
Supply
1 cover, assembly kit
关闭
Cover S
PC
(UL 94 V-0)
transparent
130x180x23mm
B4013637
Cover S, convex
Suitable for DATEC-TERMINAL S. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing from the front by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover S, convex
ABS
(UL 94 HB)
off-white RAL 9002
130x180x28mm
B4016417
Lid M closed, flat
Lid M closed, flat to cover up the terminal compartment and for mounting of pocket scanners on a magnetic, inductive and chip-card base. List of suitable devices on demand.
Supply
1 lid, 2 screws M3
关闭
Lid M closed, flat
ABS
(UL 94 HB)
off-white RAL 9002
134x62x24mm
B4016457
Lid M closed, high
Lid M closed, high to cover up the terminal compartment and for mounting of pocket scanners on a magnetic, inductive and chip-card base. List of suitable devices on demand.
Supply
1 lid, 2 screws M3
关闭
Lid M closed, high
ABS
(UL 94 HB)
off-white RAL 9002
134x67x38mm
B4016617
Cover M, flat
Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover M, flat
ABS
(UL 94 HB)
off-white RAL 9002
168x220x29mm
B4016621
Cover M, flat
Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover M, flat
PC
(UL 94 V-0)
transparent
168x220x29mm
B4016631
Cover M, convex
Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover M, convex
PC
(UL 94 V-0)
transparent
168x220x29mm
B4016637
Cover M, convex
Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover M, convex
ABS
(UL 94 HB)
off-white RAL 9002
168x220x29mm
B4016657
Cover M, high
Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover M, high
ABS
(UL 94 HB)
off-white RAL 9002
168x220x50mm
B4016671
Cover strip M / L
For covering the area with the screws when using the convex cover. Simply snap-in. Colour coding possible, e.g. by inserting an individual coloured paper print. For the complete assembly there are 2 cover strips necessary.
Supply
1 cover strip
关闭
Cover strip M / L
PC
(UL 94 V-0)
transparent
B4016677
Cover strip M / L
For covering the screwing area when using the convex cover. Simply snap-in. For the complete assembly there are 2 cover strips necessary.
Supply
1 cover strip
关闭
Cover strip M / L
ABS
(UL 94 HB)
off-white RAL 9002
B4016917
Lid M with card slot, one piece
Lid M with slot, one piece for mounting of pull-through reading devices for magnetic cards. List of suitable devices on demand. Additional machining (milling) necessary. Support plate for installation of reading devices see accessories.
Supply
1 lid, 2 screws
关闭
Lid M with card slot, one piece
ABS
(UL 94 HB)
off-white RAL 9002
134x67x38mm
B4026617
Cover SL
Suitable for DATEC-TERMINAL SL. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.
Supply
1 cover, assembly kit
关闭
Cover SL
ABS
(UL 94 HB)
off-white RAL 9002
264x180x23mm
B4026621
Cover SL
Suitable for DATEC-TERMINAL S. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.
Supply
1 cover, assembly kit
关闭
Cover SL
PC
(UL 94 V-0)
transparent
264x180x23mm
B4026637
Cover SL, convex
Suitable for DATEC-TERMINAL SL. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing from the front by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover SL, convex
ABS
(UL 94 HB)
off-white RAL 9002
263x180x28mm
B4030417
Lid L closed, flat
Lid L closed, flat to cover up the terminal compartment and for mounting of pocket scanners on a magnetic, inductive and chip-card base. List of suitable devices on demand.
Supply
1 lid, 2 screws M3
关闭
Lid L closed, flat
ABS
(UL 94 HB)
off-white RAL 9002
268x62x24mm
B4030617
Cover L, flat
Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover L, flat
ABS
(UL 94 HB)
off-white RAL 9002
302x220x29mm
B4030621
Cover L, flat
Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protectingthe electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover L, flat
PC
(UL 94 V-0)
transparent
302x220x29mm
B4030631
Cover L, convex
Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover L, convex
PC
(UL 94 V-0)
transparent
302x220x29mm
B4030637
Cover L, convex
Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover L, convex
ABS
(UL 94 HB)
off-white RAL 9002
302x220x29mm
B4030657
Cover L, high
Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.
Supply
1 cover, assembly kit
关闭
Cover L, high
ABS
(UL 94 HB)
off-white RAL 9002
302x220x50mm
B4030917
Lid L with card slot, one piece
Lid L with slot, one piece for mounting of pull-through reading devices for magnetic cards. List of suitable devices on demand. Additional machining (milling) necessary. Support plate for installation of reading devices see accessories.
Supply
1 lid, 2 screws
关闭
Lid L with card slot, one piece
ABS
(UL 94 HB)
off-white RAL 9002
268x67x38mm
B4113106
Front panel S
Front panel S for the mounting of all kinds of operating elements.
Supply
1 front panel, 4 screws diameter 4.0 mm
关闭
Front panel S
Aluminium
matt anodised
125.9x176x2mm
B4113126
Profile plate S
Profile plate S for the mounting of operating elements of all kinds. Especially designed for the use of membrane keyboards. Recessed area for protecting the operating elements.
Supply
1 profile plate, 4 screws, 2 cover strips
关闭
Profile plate S
Aluminium
matt anodised
130x180x8mm
B4113147
Wall suspension element S
Wall suspension element S for easy and secure fixing of the unit to a wall. The case is screwed down with the wall suspension element.
Supply
1 wall suspension element, 2 screws
关闭
Wall suspension element S
Steel
galvanized
79x137x8mm
B4113671
Cover strip S / SL
For covering the area with the screws when using the convex cover. Simply snap-in. Colour coding possible, e.g. by inserting an individual coloured paper print. For the complete assembly there are 2 cover strips necessary.
Supply
1 cover strip
关闭
Cover strip S / SL
PC
(UL 94 V-0)
transparent
B4113677
Cover strip S / SL
For covering the screwing area when using the convex cover. Simply snap-in. For the complete assembly there are 2 cover strips necessary.
Supply
1 cover strip
关闭
Cover strip S / SL
ABS
(UL 94 HB)
off-white RAL 9002
B4116106
Front panel MS
Front panel MS for the mounting of all kinds of operating elements. When using cover, please refer to front panel MH (accessory).
Supply
1 front panel, 4 screws diameter 5.0 mm
关闭
Front panel MS
Aluminium
matt anodised
165.4x217.4x2mm
B4116116
Front panel MH
Front panel MH used when case is fitted with a cover. Suitable for mounting of all kinds of operating elements under the cover.
Supply
1 front panel, 4 screws diameter 3 mm
关闭
Front panel MH
Aluminium
matt anodised
128x209x2mm
B4116126
Profile plate M
Profile plate M for mounting operating elements of all kinds. Especially designed for the use with membrane keyboards. Recessed area for protecting the operating elements.
Supply
1 profile plate, 4 screws, 2 cover strips
关闭
Profile plate M
Aluminium
matt anodised
168x220x8mm
B4116136
Support plate L and M
Suitable for lid L (B4030917) and lid M (B4016917) with card slot, one piece. Support plate for installation of most popular types of card readers.
Supply
1 support plate, 2 screws diameter 2.5 mm
关闭
Support plate L and M
Aluminium
matt anodised
102x45x1mm
B4116147
Wall suspension element M
Wall suspension element M for easy and secure fixing of the unit to a wall. Securing by 2 screws in the lateral pocket sections in the terminal compartment.
Supply
1 wall suspension element, 2 screws M3
关闭
Wall suspension element M
Steel
galvanized
214x126x12mm
B4126106
Front panel SL
Front panel SL for mounting of all kinds of operating elements.
Supply
1 front panel, 4 screws diameter 4.0 mm
关闭
Front panel SL
Aluminium
matt anodised
259.4x176x2mm
B4126126
Profile plate SL
Profile plate SL for the mounting of operating elements of all kinds. Especially designed for the use of membrane keyboards. Recessed area for protecting the operating elements.
Supply
1 profile plate, 4 screws, 2 cover strips
关闭
Profile plate SL
Aluminium
matt anodised
263x180x8mm
B4126147
Wall suspension element SL
Wall suspension element SL for easy and secure fixing of the unit to a wall. The case is screwed down with the wall suspension element.
Supply
1 wall suspension element, 2 screws
关闭
Wall suspension element SL
Steel
galvanized
210x137x8mm
B4130106
Front panel LS
Front panel LS for the mounting of all kinds of operating elements. When using cover, please refer to front panel LH (accessory).
Supply
1 front panel, 4 screws diameter 5.0 mm
关闭
Front panel LS
Aluminium
matt anodised
299.4x217.4x2mm
B4130116
Front panel LH
Front panel LH used when case is fitted with a cover. Suitable for mounting of all kinds of operating elements under the cover.
Supply
1 front panel, 4 screws diameter 3 mm
关闭
Front panel LH
Aluminium
matt anodised
262x209x2mm
B4130126
Profile plate L
Profile plate L for mounting operating elements of all kinds. Especially designed for the use with membrane keyboards. Recessed area for protecting the operating elements.
Supply
1 profile plate, 4 screws, 2 cover strips
关闭
Profile plate L
Aluminium
matt anodised
302x220x8mm
B4130147
Wall suspension element L
Wall suspension element L for easy and secure fixing of the unit to a wall. Securing by 2 screws in the lateral pocket sections in the terminal compartment.
Supply
1 wall suspension element, 2 screws M3
关闭
Wall suspension element L
Steel
galvanized
214x260x12mm
产品类型用于 Datec-Terminal 数据采集终端盒
如何体现您的特殊产品？ 如有需要，我们执行所有必要的修改和精加工，提供组装完毕的机盒。
DIN 标准导轨接线盒
塑料机盒 先进的塑料外壳应用于 电子电器行业
铝材质机盒 通过混合美观塑料达到高质量的铝型材机盒
旋钮 广泛的旋钮系列: 符合人体工程学、现代式和传统式设计款式
机械加工 我们为您提供迅速可靠的定制精加工
表面涂渡 我们为您涂渡机盒和旋钮，使其达到视觉和功能方面的特殊表面效果
图文打印 我们用丝网印、移印或数码打印方式打印机盒表面、操作前板和旋钮，此外。
激光打印字体 我们为众多标准系列的塑料机盒和组件提供激光打印服务
装饰膜 我们以照片质量数码打印机盒装饰膜片的图文
特殊材质 我们按您选择的颜色提供塑料材质的标准盒和旋钮
EMC 保护 我们铝涂渡多种塑料机盒以防电磁辐射
制备 / 组装 我们提供组装工作以完成组件或机盒的整体安装
合作商 - 解决方案 我们与强大的合作伙伴进行合作
医疗行业 / 实验室 / 保健领域 人和人体工程学
测量技术 / 调控技术 / 自动化技术 人和设施精确度
机械制造和设备工程 人与生产制造
机动车技术 / 建筑工程机械 / 军事应用 / 航空技术 人和机动化
取暖设施 / 空调 / 环保技术 人和设施效率
保安技术和建筑服务设施技术 人与科技
信息交流 人和信息
矿业 / 天然气 / 石油工业 人和自然资源
有关运输和贸易条款的信息
直接来自专家的专业知识
安装说明书、证书、客户杂志 INSIDE 和专业出版社的有关文摘
PDF 和 AutoCAD DWF 格式
对环境负责
我们严格保密您的个人资料，并希望您在访问我们的网站时感到安全和舒适。
版本说明
