Busca Avançada Código
Entrar Your location/language Alemanha, Português
A9178008 Contacts, female

A9178008

Contacts, female

Application: 6-pole version for transfer of the charging current and the data exchange. See assembly instruction.

Supply

1 contact

  • Usado para
A9076107 DATEC-CONTROL XS, Vers. I

A9076107

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down (battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9076107

DATEC-CONTROL XS, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
200x94x39,5mm
IP 65 opt.
A9076109 DATEC-CONTROL XS, Vers. I

A9076109

DATEC-CONTROL XS, Vers. I Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.6 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9076109

DATEC-CONTROL XS, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
200x94x39,5mm
IP 65 opt.
A9076207 DATEC-CONTROL XS, Vers. II

A9076207

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9076207

DATEC-CONTROL XS, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
200x94x39,5mm
IP 65 opt.
A9076209 DATEC-CONTROL XS, Vers. II

A9076209

DATEC-CONTROL XS, Vers. II Hand-Held Case for variable use with specially manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down.(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9076209

DATEC-CONTROL XS, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
200x94x40mm
IP 65 opt.
A9077107 DATEC-CONTROL S, Vers. I

A9077107

DATEC-CONTROL S, Vers. I Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Recesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.7 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9077107

DATEC-CONTROL S, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
228x117x47mm
IP 65 opt.
A9077109 DATEC-CONTROL S, Vers. I

A9077109

DATEC-CONTROL S, Vers. I Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version With closed operating area, recess: 1.7 mm deep

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9077109

DATEC-CONTROL S, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
228x117x47mm
IP 65 opt.
A9077207 DATEC-CONTROL S, Vers. II

A9077207

DATEC-CONTROL S, Vers. II Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9077207

DATEC-CONTROL S, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
228x117x47mm
IP 65 opt.
A9077209 DATEC-CONTROL S, Vers. II

A9077209

DATEC-CONTROL S, Vers. II Hand-Held Case for variable use with manageable operation and display area, for display and graphic modules. Reccesed operation area for membrane keyboards. Battery compartment lid alternatively snapped-on and/or screwed down(battery compartment as accessory).

Version Top part with maximum sized cutout for display modules

Supply Top and base part, battery compartment lid, assembly kit

Fechar

A9077209

DATEC-CONTROL S, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
228x117x47mm
IP 65 opt.
A9078107 DATEC-CONTROL M, Vers. I

A9078107

DATEC-CONTROL M, Vers. I Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With closed operating area, recessed: 1.7 mm deep

Supply Top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9078107

DATEC-CONTROL M, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
243x130x60mm
IP 54 opt.
A9078109 DATEC-CONTROL M, Vers. I

A9078109

DATEC-CONTROL M, Vers. I Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With closed operating area, recessed: 1.7 mm deep

Supply Top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9078109

DATEC-CONTROL M, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
243x130x60mm
IP 54 opt.
A9078207 DATEC-CONTROL M, Vers. II

A9078207

DATEC-CONTROL M, Vers. II Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With maximum sized cutout for digital displays

Supply Top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9078207

DATEC-CONTROL M, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
243x130x60mm
IP 54 opt.
A9078209 DATEC-CONTROL M, Vers. II

A9078209

DATEC-CONTROL M, Vers. II Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With maximum sized cutout for digital displays

Supply Top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9078209

DATEC-CONTROL M, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
243x130x60mm
IP 54 opt.
A9079107 DATEC-CONTROL L, Vers. I

A9079107

DATEC-CONTROL L, Vers. I Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With closed operating area, recessed: 1.7 mm deep

Supply Top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9079107

DATEC-CONTROL L, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
266x144x60mm
IP 54 opt.
A9079109 DATEC-CONTROL L, Vers. I

A9079109

DATEC-CONTROL L, Vers. I Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With closed operating area, recessed: 1.7 mm deep

Supply Top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9079109

DATEC-CONTROL L, Vers. I
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
266x144x60mm
IP 54 opt.
A9079207 DATEC-CONTROL L, Vers. II

A9079207

DATEC-CONTROL L, Vers. II Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With maximum sized cutout for digital displays

Supply top and base part, end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9079207

DATEC-CONTROL L, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
266x144x60mm
IP 54 opt.
A9079209 DATEC-CONTROL L, Vers. II

A9079209

DATEC-CONTROL L, Vers. II Convenient hand held case suitable for the mounting of changeable battery compartments (battery compartment and holder as accessory). Large display area for mounting graphic displays. Space for PCMCIA-slots under the battery compartment.

Version With maximum sized cutout for digital displays

Supply Top and base part,end cover, locking pins, mounting set with screws for the case and PCB, rubber feet

Fechar

A9079209

DATEC-CONTROL L, Vers. II
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
266x144x60mm
IP 54 opt.
A9193042 Mounting plates for contacts

A9193042

Mounting plates for contacts Universal accessories that simplify the assembly of contacts for transferring data and charging current between enclosures and stations. Available as a kit consisting of two plastic mounting plates for holding the 6-pin contacts which are available as accessories ("female" contact for the enclosure and "male" contact for the station).
For installation, cutouts into which the mounting plates can be glued must be made in the enclosure and in the station. The mounting plates can be installed first in the enclosure and station, and the contacts (accessories) at a later point in time.

Supply 2 mounting plates

Fechar

A9193042

Mounting plates for contacts
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
B4042407 Cover S

B4042407

Cover S Assembly unit: suitable for bottom part vers. I. For protecting the electronics. Integrated screw pillars for PCB fixing. Recessed operating area for protecting the membrane keyboard. Fixing from the rear.

Supply 1 cover, assembly kit

Fechar

B4042407

Cover S
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
190x135x14mm
B4042707 Bottom part S flat, version I

B4042707

Bottom part S flat, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Fechar

B4042707

Bottom part S flat, version I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
190x135x24,5mm
IP 54 opt.
B4042717 Bottom part S flat, version II

B4042717

Bottom part S flat, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Fechar

B4042717

Bottom part S flat, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
190x135x24,5mm
IP 54 opt.
B4042757 Bottom part S high, version I

B4042757

Bottom part S high, version I Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Fechar

B4042757

Bottom part S high, version I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
190x135x34,5mm
IP 54 opt.
B4042767 Bottom part S high, version II

B4042767

Bottom part S high, version II Assembly unit: unique variety of applications -mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Fechar

B4042767

Bottom part S high, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
190x135x34,5mm
IP 54 opt.
B4042837 Base S - charging station, case deposit mobile

B4042837

Base S - charging station, case deposit mobile Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.

Supply 1 base, 1 base cover, 2 covers, assembly kit

Fechar

B4042837

Base S - charging station, case deposit mobile
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
123x123x60mm
B4044707 Bottom part M flat, version I

B4044707

Bottom part M flat, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Fechar

B4044707

Bottom part M flat, version I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225x165x25,5mm
IP 54 opt.
B4044717 Bottom part M flat, version II

B4044717

Bottom part M flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Fechar

B4044717

Bottom part M flat, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225x165x25,5mm
IP 54 opt.
B4044757 Bottom part M high, version I

B4044757

Bottom part M high, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Fechar

B4044757

Bottom part M high, version I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225x165x35,5mm
IP 54 opt.
B4044767 Bottom part M high, version II

B4044767

Bottom part M high, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Fechar

B4044767

Bottom part M high, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225x165x35,5mm
IP 54 opt.
B4044837 Base M - charging station, case deposit mobile

B4044837

Base M - charging station, case deposit mobile Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.

Supply 1 base, 1 base cover, 2 covers, assembly kit

Fechar

B4044837

Base M - charging station, case deposit mobile
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
153x153x70mm
B4046707 Bottom part L flat, version I

B4046707

Bottom part L flat, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part flat

Fechar

B4046707

Bottom part L flat, version I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
275x195x26,5mm
IP 54 opt.
B4046717 Bottom part L flat, version II

B4046717

Bottom part L flat, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part flat

Fechar

B4046717

Bottom part L flat, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
275x195x26,5mm
IP 54 opt.
B4046757 Bottom part L high, version I

B4046757

Bottom part L high, version I Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting cover or aluminium front panel (sep. article)

Supply 1 bottom part high

Fechar

B4046757

Bottom part L high, version I
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
275x195x36,5mm
IP 54 opt.
B4046767 Bottom part L high, version II

B4046767

Bottom part L high, version II Assembly unit: unique variety of applications - mobile / desk-top and wall mounted. With screw pillars for PCB fixing. End piece for bottom part required - depending on the application - battery compartment and lid / bottom panel with handle recess / bottom panel with snap-in strips, base (desk-top), base (station for mobile cases) or base (desk-top/wall) can be assembled - see separate articles.

Version Suitable for mounting ABS front panel or glass panel (sep. article)

Supply 1 bottom part high

Fechar

B4046767

Bottom part L high, version II
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
275x195x36,5mm
IP 54 opt.
B4046837 Base L - charging station, case deposit mobile

B4046837

Base L - charging station, case deposit mobile Assembly unit: Suitable for case with battery compartment or bottom panel with handle recess. Ergonomically designed for desktop and for wall mounting favorable. Can be equipped either for installing the case for desktop applications or with a snap-in mechanism for secure wall mounted and desktop applications. Case position vertically or horizontally, depending on the application - see assembly instruction. Contacts for simple data and charging current transfer as accessories.

Supply 1 base, 1 base cover, 2 covers, assembly kit

Fechar

B4046837

Base L - charging station, case deposit mobile
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
183x183x80mm
B4142047 Battery compartment and lid S, 5 x AA

B4142047

Battery compartment and lid S, 5 x AA Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.

Supply 1 battery compartment and lid, assembly kit

Fechar

B4142047

Battery compartment and lid S, 5 x AA
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4142106 Front panel S

B4142106

Front panel S Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Fechar

B4142106

Front panel S
Produto adicionado a sua lista
Aluminium
matt anodised
186,5x131,5x2mm
B4142107 Front panel S

B4142107

Front panel S Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Fechar

B4142107

Front panel S
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
190,6x135,6x14,5mm
B4142167 Bottom panel with handle recess S

B4142167

Bottom panel with handle recess S Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, assembly kit

Fechar

B4142167

Bottom panel with handle recess S
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4142203 Glass panel S

B4142203

Glass panel S Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Fechar

B4142203

Glass panel S
Produto adicionado a sua lista
Glass
clear
190,6x135,6x16,7mm
B4142247 Wall suspension element S

B4142247

Wall suspension element S Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.

Supply 1 wall suspension element with snap-in mechanism

Fechar

B4142247

Wall suspension element S
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4144047 Battery compartment and lid M, 5 x AA

B4144047

Battery compartment and lid M, 5 x AA Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.

Supply 1 battery compartment and lid, assembly kit

Fechar

B4144047

Battery compartment and lid M, 5 x AA
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4144106 Front panel M

B4144106

Front panel M Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Fechar

B4144106

Front panel M
Produto adicionado a sua lista
Aluminium
matt anodised
221,5x161,5x2mm
B4144107 Front panel M

B4144107

Front panel M Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Fechar

B4144107

Front panel M
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
225,6x165,6x15,5mm
B4144167 Bottom panel with handle recess M

B4144167

Bottom panel with handle recess M Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, assembly kit

Fechar

B4144167

Bottom panel with handle recess M
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4144203 Glass panel M

B4144203

Glass panel M Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Fechar

B4144203

Glass panel M
Produto adicionado a sua lista
Glass
clear
225,6x165,6x17,7mm
B4144247 Wall suspension element M

B4144247

Wall suspension element M Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.

Supply 1 wall suspension element with snap-in mechanism

Fechar

B4144247

Wall suspension element M
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4146047 Battery compartment and lid L, 5 x AA

B4146047

Battery compartment and lid L, 5 x AA Assembly unit: suitable for bottom part vers. I and II, screw fixing. Battery clips for 5 x AA, tin-plated. Protection against incorrect polarity as well as anti-rotation device.

Supply 1 battery compartment and lid, assembly kit

Fechar

B4146047

Battery compartment and lid L, 5 x AA
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4146106 Front panel L

B4146106

Front panel L Assembly unit: suitable for bottom part vers. I. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Fechar

B4146106

Front panel L
Produto adicionado a sua lista
Aluminium
matt anodised
271,5x191,5x2mm
B4146107 Front panel L

B4146107

Front panel L Assembly unit: suitable for bottom part vers. II. For mounting operating elements of all kinds.

Supply 1 front panel, assembly kit

Fechar

B4146107

Front panel L
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
275,6x195,6x15,5mm
B4146167 Bottom panel with handle recess L

B4146167

Bottom panel with handle recess L Assembly unit: suitable for bottom part vers. I and II, screw fixing.

Supply 1 bottom panel, assembly kit

Fechar

B4146167

Bottom panel with handle recess L
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4146203 Glass panel L

B4146203

Glass panel L Assembly unit: suitable for bottom part vers. II. Front design without printing. Various media and environmental parameters affect the adhesion of the adhesive foil. Please check before use if it is suitable for your application.

Version Safety glass with anti-reflex coating, high scratch-resistance, very easy to clean

Supply 1 glass panel incl. mounting frame and adhesive foil

Fechar

B4146203

Glass panel L
Produto adicionado a sua lista
Glass
clear
275,6x195,6x17,7mm
B4146247 Wall suspension element L

B4146247

Wall suspension element L Hidden wall mounting. While closed, the entire case (version with battery compartment or base plate with handle recess) can be mounted on the wall, fixed and also removed again by means of the wall suspension element.

Supply 1 wall suspension element with snap-in mechanism

Fechar

B4146247

Wall suspension element L
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
B4208107 CARRYTEC S

B4208107

CARRYTEC S Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Fechar

B4208107

CARRYTEC S
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
222x205x80mm
IP 54 opt.
B4208208 CARRYTEC S

B4208208

CARRYTEC S Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Fechar

B4208208

CARRYTEC S
Produto adicionado a sua lista
ASA+PC (UL 94 V-0)
lava
222x205x80mm
IP 54 opt.
B4210107 CARRYTEC M

B4210107

CARRYTEC M Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Fechar

B4210107

CARRYTEC M
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
270x247x91mm
IP 54 opt.
B4210208 CARRYTEC M

B4210208

CARRYTEC M Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Fechar

B4210208

CARRYTEC M
Produto adicionado a sua lista
ASA+PC (UL 94 V-0)
lava
270x247x91mm
IP 54 opt.
B4213107 CARRYTEC L

B4213107

CARRYTEC L Robust plastic enclosure with handle. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Fechar

B4213107

CARRYTEC L
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
348x303x117mm
IP 54 opt.
B4213208 CARRYTEC L

B4213208

CARRYTEC L Particularly robust plastic enclosure with handle for outdoor use. Recessed surface for membrane keyboards. Flat, impact-protected areas on the bottom part of the enclosure for installing interfaces, plug-in connectors, peripheral equipment etc. Interface installation at the rear, e.g. support arm applications, ensures orderly cable routing through enclosure connection, mounting points match the hole patterns of VESA MIS-D 100. Attachment domes for PCBs and components in the top and bottom parts. Stations for easy transmission of data and charging current, as well as battery compartment 5 x AA (processing on request) as an accessory.

Supply Top and bottom parts, TPE handle pad, assembly kit

Fechar

B4213208

CARRYTEC L
Produto adicionado a sua lista
ASA+PC (UL 94 V-0)
lava
348x303x117mm
IP 54 opt.
B7000107 ERGO-CASE S, flat

B7000107

ERGO-CASE S, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7000107

ERGO-CASE S, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
80x96x32mm
IP 54 opt.
B7000109 ERGO-CASE S, flat

B7000109

ERGO-CASE S, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7000109

ERGO-CASE S, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
80x96x32mm
IP 54 opt.
B7005107 ERGO-CASE S, high

B7005107

ERGO-CASE S, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7005107

ERGO-CASE S, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
80x96x44mm
IP 54 opt.
B7005109 ERGO-CASE S, high

B7005109

ERGO-CASE S, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7005109

ERGO-CASE S, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
80x96x44mm
IP 54 opt.
B7010107 ERGO-CASE M, flat

B7010107

ERGO-CASE M, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7010107

ERGO-CASE M, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x100x40mm
IP 54 opt.
B7010109 ERGO-CASE M, flat

B7010109

ERGO-CASE M, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7010109

ERGO-CASE M, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x100x40mm
IP 54 opt.
B7010207 ERGO-CASE M, flat

B7010207

ERGO-CASE M, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7010207

ERGO-CASE M, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x100x40mm
IP 54 opt.
B7010209 ERGO-CASE M, flat

B7010209

ERGO-CASE M, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7010209

ERGO-CASE M, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x100x40mm
IP 54 opt.
B7015107 ERGO-CASE M, high

B7015107

ERGO-CASE M, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7015107

ERGO-CASE M, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x100x55mm
IP 54 opt.
B7015109 ERGO-CASE M, high

B7015109

ERGO-CASE M, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7015109

ERGO-CASE M, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x100x55mm
IP 54 opt.
B7015207 ERGO-CASE M, high

B7015207

ERGO-CASE M, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7015207

ERGO-CASE M, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x100x55mm
IP 54 opt.
B7015209 ERGO-CASE M, high

B7015209

ERGO-CASE M, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7015209

ERGO-CASE M, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x100x55mm
IP 54 opt.
B7020107 ERGO-CASE L, flat

B7020107

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7020107

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x54mm
IP 54 opt.
B7020109 ERGO-CASE L, flat

B7020109

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7020109

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x54mm
IP 54 opt.
B7020137 ERGO-CASE L, flat

B7020137

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7020137

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x54mm
IP 40
B7020139 ERGO-CASE L, flat

B7020139

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part and with display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7020139

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x54mm
IP 40
B7020147 ERGO-CASE L, flat

B7020147

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With top top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7020147

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x54mm
IP 40
B7020149 ERGO-CASE L, flat

B7020149

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With flat top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7020149

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x54mm
IP 40
B7020207 ERGO-CASE L, flat

B7020207

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7020207

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x54mm
IP 54 opt.
B7020209 ERGO-CASE L, flat

B7020209

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7020209

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x54mm
IP 54 opt.
B7020237 ERGO-CASE L, flat

B7020237

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7020237

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x54mm
IP 40
B7020239 ERGO-CASE L, flat

B7020239

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7020239

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x54mm
IP 40
B7020247 ERGO-CASE L, flat

B7020247

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7020247

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x54mm
IP 40
B7020249 ERGO-CASE L, flat

B7020249

ERGO-CASE L, flat Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With flat top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7020249

ERGO-CASE L, flat
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x54mm
IP 40
B7025107 ERGO-CASE L, high

B7025107

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7025107

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x69mm
IP 54 opt.
B7025109 ERGO-CASE L, high

B7025109

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part

Supply 1 top and 1 bottom part, battery compartment lid, assembly kit

Fechar

B7025109

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x69mm
IP 54 opt.
B7025137 ERGO-CASE L, high

B7025137

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7025137

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x69mm
IP 40
B7025139 ERGO-CASE L, high

B7025139

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7025139

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x69mm
IP 40
B7025147 ERGO-CASE L, high

B7025147

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part and with display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7025147

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x69mm
IP 40
B7025149 ERGO-CASE L, high

B7025149

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side. Battery compartment lid snapped-on (battery compartment as accessory).

Version With high top part and display panel

Supply 1 top and 1 bottom part, battery compartment lid, display trim, assembly kit

Fechar

B7025149

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x69mm
IP 40
B7025207 ERGO-CASE L, high

B7025207

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7025207

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x69mm
IP 54 opt.
B7025209 ERGO-CASE L, high

B7025209

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part

Supply 1 top and 1 bottom part, assembly kit

Fechar

B7025209

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x69mm
IP 54 opt.
B7025237 ERGO-CASE L, high

B7025237

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7025237

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x69mm
IP 40
B7025239 ERGO-CASE L, high

B7025239

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7025239

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x69mm
IP 40
B7025247 ERGO-CASE L, high

B7025247

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7025247

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
off-white RAL 9002
150x200x69mm
IP 40
B7025249 ERGO-CASE L, high

B7025249

ERGO-CASE L, high Ergonomically shaped enclosure to wear on the body. Recessed operating area in order to protect the membrane keyboards. Plane area for individual interfaces at the end side.

Version With high top part and display panel

Supply 1 top and 1 bottom part, display trim, assembly kit

Fechar

B7025249

ERGO-CASE L, high
Produto adicionado a sua lista
ABS (UL 94 HB)
black RAL 9005
150x200x69mm
IP 40
  • Dados técnicos
  • Desenho / Informações
  • Purchasing Data
Colour
Contacts gold-plated
Poles
6
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
0,5 g
Customs tariff number
(OKW product)
85369095
Country of manufacture
Taiwan