Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
AltText

Smart-Case

Obudowa profilowana pod rękę – wygodny chwyt

Pomysł dający większą ekspresję ergonomii był punktem wyjścia w rozwoju naszych obudów SMART-CASE.

  • ergonomiczny kształt dla maksymalnego komfortu użytkownika
  • idealna dla urządzeń zdalnego sterowania podłączonych za pośrednictwem kabla lub zasilany bateriami:  AAA, AA, 9 V lub 12 V
  • wersje ze wstępnie zamontowanym przepustem kablowym (rozmiary M, L i XL)
  • wersje ze wstępnie zamontowane przepusty kablowe (rozmiary M, L i XL)
  • ABS (UL 94 HB); SMART-CASES z PMMA plexiglas przepuszczający światło podczerwone
  • klasa szczelności do IP 65: rozmiary L i XL z opcjonalnym bez pojemnika baterii
  • stabilny uchwyt jako opcja
  • stacja na biurko w rozmiarach M, L i XL
  • wewnętrzne słupki pod PCB
  • 4 rozmiary obudowy
  • Przykłady aplikacji

Obszary zastosowań

  • Wiele różnych rodzajów systemów zdalnego sterowania
  • Rozwiązania mobilne USB
  • Specjalnie dla technologii medycznych, a także w gospodarstwach domowych oraz w przemyśle
  • Wersje
  • Akcesoria
  • Opcje dostosowywania

Wybierz poniżej wersję / rozmiar lub przejrzyj pełną listę produktów.

AltText

A0304031

Self-tapping screws 2.2 x 5 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Zamknij

A0304031

Self-tapping screws 2.2 x 5 mm (PZ1)
produkt został dodany do twojej listy
AltText

A9100001

Ring eyelet For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 3 mm, location hole ø 4 mm required.

Supply 1 ring eyelet

Zamknij

A9100001

Ring eyelet
produkt został dodany do twojej listy
PA 6
volcano
AltText

A9100002

Ring eyelet For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.

Supply 1 ring eyelet

Zamknij

A9100002

Ring eyelet
produkt został dodany do twojej listy
PA 6
volcano
AltText

A9160003

Plug-in contact, 1 x 9 V (PP3) Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).

Supply 1 plug-in contact

Zamknij

A9160003

Plug-in contact, 1 x 9 V (PP3)
produkt został dodany do twojej listy
AltText

A9164001

Key ring Version: diameter = 20.5 mm.

Supply 1 key ring

Zamknij

A9164001

Key ring
produkt został dodany do twojej listy
Steel
nickel-plated
20,5mm
AltText

A9166001

Set of battery clips, 2 x AAA For contacting the batteries.

Supply 4 single contacts

Zamknij

A9166001

Set of battery clips, 2 x AAA
produkt został dodany do twojej listy
Steel
tin-plated
AltText

A9166002

Battery contact, 2 x AAA In combination with battery contacts A9166001 it's possible to have a bridge connection and therefore a serial connection.

Supply 1 battery contact

Zamknij

A9166002

Battery contact, 2 x AAA
produkt został dodany do twojej listy
Steel
tin-plated
AltText

A9166003

Battery holder, 2 x AAA The battery holder allows practically movement-free securing of the 2 x 1.5 V micro cells (AAA), thus ensuring that the internal power supply is securely located in position.

Supply 1 battery holder, 1 self-tapping screw

Zamknij

A9166003

Battery holder, 2 x AAA
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
black RAL 9005
AltText

A9166004

Set of pull-relief For pull-relief of cable-connected applications. To be mounted onto the towers provided in the case or station.

Supply 2 preshaped pull-relief clamps, 2 self-tapping screws

Zamknij

A9166004

Set of pull-relief
produkt został dodany do twojej listy
PA 6
volcano
AltText

A9166005

Adhesive foil M For self-adhesive mounting of the holder. Double-sided adhesive foil with foam carrier.

Supply 1 piece

Zamknij

A9166005

Adhesive foil M
produkt został dodany do twojej listy
AltText

A9166037

Station M Attractive and practical station for holding your SMART CASE M with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Zamknij

A9166037

Station M
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9166039

Station M Attractive and practical station for holding your SMART CASE M with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Zamknij

A9166039

Station M
produkt został dodany do twojej listy
ABS (UL 94 HB)
black RAL 9005
AltText

A9166307

Holder M Special holder for SMART-CASE M for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE M with clip.

Supply 1 holder

Zamknij

A9166307

Holder M
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9166309

Holder M Special holder for SMART-CASE M for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE M with clip.

Supply 1 holder

Zamknij

A9166309

Holder M
produkt został dodany do twojej listy
ABS (UL 94 HB)
black RAL 9005
AltText

A9167002

Sealing L Application: for a higher protection class. For versions II - V.

Supply 1 Sealing kit

Zamknij

A9167002

Sealing L
produkt został dodany do twojej listy
AltText

A9167005

Adhesive foil L For self-adhesive mounting of the holder. Double-sided adhesive foil with foam carrier.

Supply 1 piece

Zamknij

A9167005

Adhesive foil L
produkt został dodany do twojej listy
AltText

A9167017

Belt/pocket clip Design: Special clip for SMART-CASE M, L and XL. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 Clip, assembly kit

Zamknij

A9167017

Belt/pocket clip
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
off-white RAL 9002
AltText

A9167019

Belt/pocket clip Design: Special clip for SMART-CASE M, L and XL. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 Clip, assembly kit

Zamknij

A9167019

Belt/pocket clip
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
black RAL 9005
AltText

A9167027

Holding clamp Special holding clamp for attaching to tubes up to Ø 32 mm and corresponding suspensions. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 holding clamp, assembly kit

Zamknij

A9167027

Holding clamp
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
off-white RAL 9002
AltText

A9167029

Holding clamp Special holding clamp for attaching to tubes up to Ø 32 mm and corresponding suspensions. For fixing the preshaped centres in the bottom part have to be milled or punched.

Supply 1 holding clamp, assembly kit

Zamknij

A9167029

Holding clamp
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
black RAL 9005
AltText

A9167037

Station L Attractive and practical station for holding your SMART CASE L with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Zamknij

A9167037

Station L
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9167039

Station L Attractive and practical station for holding your SMART CASE L with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Zamknij

A9167039

Station L
produkt został dodany do twojej listy
ABS (UL 94 HB)
black RAL 9005
AltText

A9167307

Holder L Special holder for SMART-CASE L for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE L with clip.

Supply 1 holder

Zamknij

A9167307

Holder L
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9167309

Holder L Special holder for SMART-CASE L for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE L with clip.

Supply 1 holder

Zamknij

A9167309

Holder L
produkt został dodany do twojej listy
ABS (UL 94 HB)
black RAL 9005
AltText

A9168002

Sealing XL Application: For a higher protection class. For the versions II - V.

Supply 1 sealing

Zamknij

A9168002

Sealing XL
produkt został dodany do twojej listy
AltText

A9168005

Adhesive foil XL For self-adhesive mounting of the holder. Double-sided adhesive foil with foam carrier.

Supply 1 piece

Zamknij

A9168005

Adhesive foil XL
produkt został dodany do twojej listy
AltText

A9168037

Station XL Attractive and practical station for holding your SMART CASE XL with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Zamknij

A9168037

Station XL
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9168039

Station XL Attractive and practical station for holding your SMART CASE XL with internal power supply. Contact is made with contact pins and spring contacts so that you can charge your batteries automatically (separate article, holes necessary, preformed centring facility provided). Pillars for PCB mounting, and strain relief to the rear.

Supply Bottom and top part, rubber feet, assembly kit

Zamknij

A9168039

Station XL
produkt został dodany do twojej listy
ABS (UL 94 HB)
black RAL 9005
AltText

A9168307

Holder XL Special holder for SMART-CASE XL for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm.

Supply 1 holder

Zamknij

A9168307

Holder XL
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9168309

Holder XL Special holder for SMART-CASE XL for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm.

Supply 1 holder

Zamknij

A9168309

Holder XL
produkt został dodany do twojej listy
ABS (UL 94 HB)
black RAL 9005
AltText

A9190002

Set of battery clips, 2xN/2xAA/2xAAA For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).

Supply 1 double contact, 2 single contacts

Zamknij

A9190002

Set of battery clips, 2xN/2xAA/2xAAA
produkt został dodany do twojej listy
Steel
tin-plated
AltText

A9190003

Set of battery clips, 2xN/2xAA/2xAAA For contacting the batteries.

Supply 1 double contact, 2 single contacts

Zamknij

A9190003

Set of battery clips, 2xN/2xAA/2xAAA
produkt został dodany do twojej listy
Steel
nickel-plated
AltText

A9193030

Contact pin Contact pin, round with flat flange for transmitting charging current. Stepped bore necessary, then self-locking. Further contact established by means of a soldered stranded wire in the internal drilled hole. Load-carrying capacity up to 15 A. Extremely low contact resistance.

Supply 1 contact pin

Zamknij

A9193030

Contact pin
produkt został dodany do twojej listy
gold-plated
AltText

A9193032

Spring contact Spring contact, round with ballpoint tip and collar for transmitting charging current. Drilled hole necessary, then self-locking. Further contact established by means of a soldered stranded wire on the fixed outer surface or PCB mounting. Load-carrying capacity up to 3 A. 1.5 mm stroke, 0,3 N. Extremely low contact resistance.

Supply 1 spring contact

Zamknij

A9193032

Spring contact
produkt został dodany do twojej listy
AltText

B9100063

Carrying strap, textile lanyard Textile lanyard with loop attachment.

ATTTENTION, PART TO BE DISCONTINUED:
The article is only available in limited quantities. Please ask for it!

Supply 1 lanyard

Zamknij

B9100063

Carrying strap, textile lanyard
produkt został dodany do twojej listy
black
860mm

Opcje dostosowywania dla Smart-Case

Czego potrzebujesz do spersonalizowania, swojego produktu? Dostarczamy obudowy i pokrętła wraz ze wszystkimi niezbędnymi wymaganymi modyfikacjami.