Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
AltText

In-Box

Wytrzymałe obudowy przemysłowe

Obudowy do systemów modułowych jak i do elektroniki. IN-BOX oferuje wszechstronne opcje dla inżynierów elektrotechniki i elektroniki.

  • dziewięć baz pod obudowy o wysokim połysku powierzchni i różnych wysokościach
  • dwa standardowe materiały: ABS (UL 94 HB) lub PC (V-2);
    obudowy zrobione w całości z PC zgodne są z standardem bezpieczeństwa pożarowego UL 94 5V (lepsze niż V-0), mimo, że materiał posiada tylko klasyfikację V-2
  • wysoka klasa szczelności IP 66/67; spieniona uszczelka w górnej części
  • wysoka wytrzymałość na uderzenia IK07 (ABS) oraz IK08 (PC)
  • górne części w kolorze lub przezroczyste
  • zakręcane na ćwierć obrotu śruby pokrywy (stal nierdzewna)
  • zagłębienie pod klawiaturę membranową lub folię dekoracyjną
  • bezpośredni montażu na ścianie lub montaż na zewnętrznych wspornikach; w razie potrzeby mogą być wewnętrzne. Zestaw zawiasów może być dostarczony jako wyposażenie
  • opcjonalny zestaw bezpieczeństwa za pomocą plomby ołowianej
  • szyny DIN lub płyty montażowe dla poszczególnych instalacji i konfiguracji
  • wewnętrzne słupki pod PCB, szyny DIN lub płyty montażowe
  • Przykłady aplikacji

Obszary zastosowań

  • Idealny dla elektroniki przemysłowej, takie jak cyfrowe i analogowe urządzenia, czujniki, interfejsy oraz systemy bezpieczeństwa
  • Również do zastosowań elektrycznych, takich jak ogrzewanie, klimatyzacja i wentylacja, budowa maszyn i urządzeń budowlanych
  • Smart Factory / Industry 4.0
  • Wersje
  • Akcesoria
  • Opcje dostosowywania
AltText

C2306917

Pressure equalisation element M6x0.75 Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply 1 pressure equalisation element, 1 seal washer, 1 nut

Zamknij

C2306917

Pressure equalisation element M6x0.75
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
light grey RAL 7035
IP 56
AltText

C2310917

Pressure equalisation element M10x1 Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply 1 pressure equalisation element, 1 seal washer, 1 nut

Zamknij

C2310917

Pressure equalisation element M10x1
produkt został dodany do twojej listy
PA 6 (UL 94 HB)
light grey RAL 7035
IP 56
AltText

C2320137

Cable grommet Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 1 - 4 mm and for cable diameters from 8 - 13 mm. Operating temperatures from -40°C to +100°C. Borehole ø 20.5 mm.

Supply 1 cable grommet

Zamknij

C2320137

Cable grommet
produkt został dodany do twojej listy
EPDM
light grey RAL 7035
IP 67
AltText

C7100092

Wall-mounting brackets Wall-mounting brackets made of plastic for external wall mounting. Installation above, below or laterally, as required.

Supply 4 wall-mounting brackets incl. fasteners

Zamknij

C7100092

Wall-mounting brackets
produkt został dodany do twojej listy
PC GF15
AltText

C7100128

Security kit To secure the enclosure against unauthorised access.

Supply 1 security kit

Zamknij

C7100128

Security kit
produkt został dodany do twojej listy
PP
AltText

C7100138

Security kit To secure the enclosure against unauthorised access.

Supply 1 security kit

Zamknij

C7100138

Security kit
produkt został dodany do twojej listy
PP
AltText

C7100142

Inside hinge For converting the top part of the enclosure into a folding door.

Supply 2 hinges, fastening screws with drill template

Zamknij

C7100142

Inside hinge
produkt został dodany do twojej listy
PC
AltText

C7100167

Screw 3.9 x 9 mm For fitting standard DIN rails, mounting plates, PCBs, components etc.

Supply 1 self-tapping screw

Zamknij

C7100167

Screw 3.9 x 9 mm
produkt został dodany do twojej listy
AltText

C7110056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7110056

Mounting plate
produkt został dodany do twojej listy
73x53x2,5mm
AltText

C7110077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7110077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
66x35x7,5mm
AltText

C7110087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7110087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
66x15x5,5mm
AltText

C7111056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7111056

Mounting plate
produkt został dodany do twojej listy
91x73x2,5mm
AltText

C7111077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7111077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
104x35x7,5mm
AltText

C7111087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7111087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
104x15x5,5mm
AltText

C7112056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7112056

Mounting plate
produkt został dodany do twojej listy
113x93x2,5mm
AltText

C7112077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7112077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
108x35x7,5mm
AltText

C7112087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7112087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
108x15x5,5mm
AltText

C7113056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7113056

Mounting plate
produkt został dodany do twojej listy
131x73x2,5mm
AltText

C7113077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7113077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
144x35x7,5mm
AltText

C7113087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7113087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
144x15x5,5mm
AltText

C7114056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7114056

Mounting plate
produkt został dodany do twojej listy
131x113x2,5mm
AltText

C7115056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7115056

Mounting plate
produkt został dodany do twojej listy
171x113x2,5mm
AltText

C7115077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7115077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
184x35x7,5mm
AltText

C7115087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7115087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
184x15x5,5mm
AltText

C7116056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7116056

Mounting plate
produkt został dodany do twojej listy
171x143x2,5mm
AltText

C7116077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7116077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
168x35x7,5mm
AltText

C7116087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7116087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
168x15x5,5mm
AltText

C7117056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7117056

Mounting plate
produkt został dodany do twojej listy
220,5x152,5x2,5mm
AltText

C7117077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7117077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
220x35x7,5mm
AltText

C7117087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7117087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
220x15x5,5mm
AltText

C7118056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Zamknij

C7118056

Mounting plate
produkt został dodany do twojej listy
270,5x222,5x2,5mm
AltText

C7118077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Zamknij

C7118077

Standard DIN rail, Type TH 35
produkt został dodany do twojej listy
Steel
283,5x35x7,5mm
AltText

C7118087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Zamknij

C7118087

Standard DIN rail, Type TH 15
produkt został dodany do twojej listy
Steel
283,5x15x5,5mm

Opcje dostosowywania dla In-Box

Czego potrzebujesz do spersonalizowania, swojego produktu? Dostarczamy obudowy i pokrętła wraz ze wszystkimi niezbędnymi wymaganymi modyfikacjami.