Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
AltText

Hand-Terminal

Obudowy przenośne dla systemów zarządzania produkcją i prac na zewnątrz

Te wytrzymałe, atrakcyjne i wysoce funkcjonalne obudowy są zaprojektowane specjalnie do ciężkich przenośnych urządzeń elektronicznych.

  • materiału odpornego na uderzenia
  • wytrzymałe o wysokiej klasie szczelności IP 65 (uszczelniający zestaw akcesoriów)
  • dużo miejsca dla elementów operacyjnych, wyświetlaczy, awaryjnych wyłączników stop, przycisków itp.
  • ergonomiczny uchwyt, mocny chwyt
  • do kontroli za pomocą kabla lub pojemnik baterii 4 x AA, 1 x 9 V lub 2 x 9 V
  • optymalna waga
  • zagłębienie pod klawiaturę membranową
  • wersja I z zamkniętą górną częścią
  • wersja II do montażu aluminiowego panelu
  • słupki do mocowania PCB
  • Przykłady aplikacji

Obszary zastosowań

  • Elastycznych systemów sterowania maszyn na produkcji i montażu
  • Terminale do programowania i aplikacji
  • Dla klasycznych zastosowań w dziedzinie elektrotechniki i elektroniki, np.: urządzenia do pomiaru i kontroli, terminale mobilne, jednostki zbierające dane i wiele innych
  • Przeglądaj pełną listę
  • Akcesoria
  • Opcje dostosowywania
AltText

A9046107

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Zamknij

A9046107

HAND-TERMINAL M, Vers. I
produkt został dodany do twojej listy
PC+ABS (UL 94 V-0)
off-white RAL 9002
220x120x65mm
IP 65 opt.
AltText

A9046109

HAND-TERMINAL M, Vers. I Robust hand-held enclosure. Recessed operation area for membrane keyboards. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With closed operation area

Supply Top and bottom part, battery compartment lid, assembly kit incl. PCB-screws and rubber feet

Zamknij

A9046109

HAND-TERMINAL M, Vers. I
produkt został dodany do twojej listy
PC+ABS (UL 94 V-0)
black RAL 9005
220x120x65mm
IP 65 opt.
AltText

A9046207

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminium-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Zamknij

A9046207

HAND-TERMINAL M, Vers. II
produkt został dodany do twojej listy
PC+ABS (UL 94 V-0)
off-white RAL 9002
220x120x65mm
IP 65 opt.
AltText

A9046209

HAND-TERMINAL M, Vers. II Robust hand-held enclosure. Assembly of the front panels (accessories) from the rear. Screw pillars for PCBs in top and bottom part. Battery compartment as an accessory.

Version With frame cover for the use of an aluminium-front panel (accessories)

Supply Frame cover, bottom part, battery compartment lid, assembly kit incl. screws for the front panel as well as for the PCB and rubber feet

Zamknij

A9046209

HAND-TERMINAL M, Vers. II
produkt został dodany do twojej listy
PC+ABS (UL 94 V-0)
black RAL 9005
220x120x65mm
IP 65 opt.
AltText

A0306031

Self-tapping screws 3 x 6 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Zamknij

A0306031

Self-tapping screws 3 x 6 mm (PZ1)
produkt został dodany do twojej listy
AltText

A0308031

Self-tapping screws 3 x 8 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Zamknij

A0308031

Self-tapping screws 3 x 8 mm (PZ1)
produkt został dodany do twojej listy
AltText

A0308132

Self-tapping screw 3 x 8 mm (T10) Self-tapping screw with T10 Torx drive. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Zamknij

A0308132

Self-tapping screw 3 x 8 mm (T10)
produkt został dodany do twojej listy
Stainless steel
AltText

A9146101

Front panel M For HAND-TERMINAL version II. Front panel installation at the top part from the rear.

Supply 1 front panel (srews supplied with the case)

Zamknij

A9146101

Front panel M
produkt został dodany do twojej listy
Aluminium
matt anodised
179x88x2mm
AltText

A9146106

Sealing kit M For the case. For a higher protection class. Attention: for HAND-TERMINAL version II with frame cover for inserting an aluminium front panel additionally sealing A9146206 for the front panel necessary.

Supply 1 sealing kit

Zamknij

A9146106

Sealing kit M
produkt został dodany do twojej listy
AltText

A9146206

Sealing M For the front panel of HAND-TERMINAL version II. For a higher protection class.

Supply 1 sealing

Zamknij

A9146206

Sealing M
produkt został dodany do twojej listy
AltText

A9160003

Plug-in contact, 1 x 9 V (PP3) Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).

Supply 1 plug-in contact

Zamknij

A9160003

Plug-in contact, 1 x 9 V (PP3)
produkt został dodany do twojej listy
AltText

A9161002

Set of battery clips, 2 x 9 V or 4 x AA For contacting the batteries 2 x 9 V.
Note application DATEC-MOBIL-BOX L with battery compartment: only for this enclosure 2 x 9 V or 4 x AA is possible.

Supply 4 single contacts

Zamknij

A9161002

Set of battery clips, 2 x 9 V or 4 x AA
produkt został dodany do twojej listy
Steel
tin-plated
AltText

A9174002

Battery compartment, 2 x 9 V Application: for 2 x 9 V flat batteries (PP3).

Supply 1 battery compartment, assembly kit

Zamknij

A9174002

Battery compartment, 2 x 9 V
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9174003

Battery compartment, 1 x 9 V Application: for 1 x 9 V flat battery (PP3).

Supply 1 battery compartment, assembly kit

Zamknij

A9174003

Battery compartment, 1 x 9 V
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9174006

Set of battery clips, 1 x 9 V For contacting the battery.

Supply 2 single contacts

Zamknij

A9174006

Set of battery clips, 1 x 9 V
produkt został dodany do twojej listy
Steel
tin-plated
AltText

A9250250

Battery spacer The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.

Supply 1 spacer

Zamknij

A9250250

Battery spacer
produkt został dodany do twojej listy
PE foam
50x25x4mm
AltText

A9345217

Set of battery compartment, 4 x AA For 4 x 1.5 V mignon-cells (AA). Complies with DIN EN 60601 (short circuit caused by incorrect insertion of batteries impossible).

Supply 1 battery compartment, battery clips nickel-plated, assembly kit

Zamknij

A9345217

Set of battery compartment, 4 x AA
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002

Opcje dostosowywania dla Hand-Terminal

Czego potrzebujesz do spersonalizowania, swojego produktu? Dostarczamy obudowy i pokrętła wraz ze wszystkimi niezbędnymi wymaganymi modyfikacjami.