Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
AltText

Diatec

Atrakcyjne obudowy o płaskim profilu

Te bardzo atrakcyjne obudowy o płaskim kształcie są szczególnie odpowiednie dla środowiska domu i pracy. Idealne do komunikacji i urządzeń sieciowych.

  • nowoczesna, płaska obudowa do montażu na ścianie lub elektroniki biurkowej
  • centralny panel sterowania do montażu klawiatury, ekranu dotykowego lub wyświetlacza
  • wnęka do montażu i ochrony interfejsów, złącz, przepustów kablowych itp.
  • łatwy, niewidoczny montaż ścienny; zapięcia w bazie
  • cztery rozmiary w dwóch kolorach
  • DIATEC XS: obudowa dwuczęściowa, składający się z górnej i dolnej części, skręcane, zintegrowany uchwyt baterii na 2 x AA, profilowany uchwyt dolnej części
  • DIATEC S, M, L: obudowa czteroczęściowa, składający się z części górnej i dolnej, jak również dwóch okładek ukrywających wkręty montażowe; W razie potrzeby, pokrywy mogą być zablokowane, aby zapobiec nieuprawnionemu dostępowi; Zintegrowany pojemnik baterii do 2 x AA lub 1 x 9 V
  • panel slot-in (akcesoria) może być używany w celu oddzielenia obszarów dla elektroniki
  • klasa szczelności IP 40
  • przystawki na panelach bocznych umożliwiają montaż bez demontażu panelu górnego (S, M, L)
  • klapka na zawiasach z ABS, lub przezroczystego poliwęglanu (akcesoria S, M, L)
  • wewnętrzne słupki pod PCB
  • Przykłady aplikacji

Obszary zastosowań

  • Urządzenia peryferyjnych do komputerów
  • IoT/IIoT  
  • Systemów danych
  • Systemy gromadzenia danych w pracy
  • Kontrola dostępu i zabezpieczeń
  • Urządzania pomiarowe i sterowania
  • Medyczne i laboratoryjne technologie
  • Przeglądaj pełną listę
  • Akcesoria
  • Opcje dostosowywania
AltText

A9092107

DIATEC XS Two-part case. The bottom part can be fixed directly to the wall, the top part is fixed by screws from above or below. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated battery compartment for 2 x AA.

Supply Top and bottom part, assembly kit

Zamknij

A9092107

DIATEC XS
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
150x37x155mm
IP 40
AltText

A9092108

DIATEC XS Two-part case. The bottom part can be fixed directly to the wall, the top part is fixed by screws from above or below. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCB in the bottom and top parts. Integrated battery compartment for 2 x AA.

Supply Top and bottom part, assembly kit

Zamknij

A9092108

DIATEC XS
produkt został dodany do twojej listy
ABS (UL 94 HB)
lava
150x37x155mm
IP 40
AltText

A9093107

DIATEC S Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorised access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Zamknij

A9093107

DIATEC S
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
210x48x200mm
IP 40
AltText

A9093108

DIATEC S Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorised access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Zamknij

A9093108

DIATEC S
produkt został dodany do twojej listy
ABS (UL 94 HB)
lava
210x48x200mm
IP 40
AltText

A9094107

DIATEC M Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorised access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Zamknij

A9094107

DIATEC M
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
270x48x200mm
IP 40
AltText

A9094108

DIATEC M Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorised access. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs in bottom and top part. Integrated supports for 2 x AA / 1 x 9 V.

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Zamknij

A9094108

DIATEC M
produkt został dodany do twojej listy
ABS (UL 94 HB)
lava
270x48x200mm
IP 40
AltText

A9095107

DIATEC L Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorised access. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated battery compartment for 2 x AA / 1 x 9 V. If required the hinged lid S can be mounted either on the right or on the left to partially cover the dialog area (on one side).

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Zamknij

A9095107

DIATEC L
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
330x48x200mm
IP 40
AltText

A9095108

DIATEC L Four-part case. The bottom part can be fixed directly to the wall, the top part will be assembled by means of screws from the front. 2 side trims close the case. If required, the trims can also be locked, thus preventing unauthorised access. Recessed operating area to protect the membrane keyboard. Fastening pillars in the bottom and top part. Integrated supports for 2 x AA / 1 x 9 V. If required the hinged lid S can be mounted either on the right or on the left to partially cover the dialog area (on one side).

Supply Bottom and top part, trim left and right side incl. 2 locking elements, assembly kit

Zamknij

A9095108

DIATEC L
produkt został dodany do twojej listy
ABS (UL 94 HB)
lava
330x48x200mm
IP 40
AltText

A0306031

Self-tapping screws 3 x 6 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Zamknij

A0306031

Self-tapping screws 3 x 6 mm (PZ1)
produkt został dodany do twojej listy
AltText

A0399T10

Torx T10 screwdriver Screwdriver with ergonomic handle for reliably turning, tightening and loosening Torx T10 type screws. (original can deviate from photo)

Supply 1 screwdriver

Zamknij

A0399T10

Torx T10 screwdriver
produkt został dodany do twojej listy
AltText

A9160003

Plug-in contact, 1 x 9 V (PP3) Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).

Supply 1 plug-in contact

Zamknij

A9160003

Plug-in contact, 1 x 9 V (PP3)
produkt został dodany do twojej listy
AltText

A9190002

Set of battery clips, 2xN/2xAA/2xAAA For contacting the batteries.
Note application ART-CASE: only for base suitable (2 x AA).

Supply 1 double contact, 2 single contacts

Zamknij

A9190002

Set of battery clips, 2xN/2xAA/2xAAA
produkt został dodany do twojej listy
Steel
tin-plated
AltText

A9190015

Set of battery clips, 2 x AA For contacting the batteries. Complies with DIN EN 60601. The modified geometry rules out the possibility of a short circuit when inserting the batteries incorrectly!

Supply 1 single contact positive, 1 single contact negative

Zamknij

A9190015

Set of battery clips, 2 x AA
produkt został dodany do twojej listy
Steel
nickel-plated
AltText

A9193121

Hinged lid S, L Hinged lid for covering the dialog zone on DIATEC S or for partially covering the dialog area on DIATEC L (on one side). 2 mounting holes ø 4,2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9193121

Hinged lid S, L
produkt został dodany do twojej listy
PC (UL 94 V-0)
translucent
AltText

A9193122

Hinged lid S, L Hinged lid for covering the dialogue zone on DIATEC S or for partially covering the dialog area on DIATEC L (on one side). 2 mounting holes ø 4,2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9193122

Hinged lid S, L
produkt został dodany do twojej listy
PC (UL 94 V-0)
translucent
AltText

A9193127

Hinged lid S, L Hinged lid for covering the dialogue zone on DIATEC S or for partially covering the dialog area on DIATEC L (on one side). 2 mounting holes ø 4,2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9193127

Hinged lid S, L
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9193128

Hinged lid S, L Hinged lid for covering the dialogue zone on DIATEC S or for partially covering the dialog area on DIATEC L (on one side). 2 mounting holes ø 4,2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9193128

Hinged lid S, L
produkt został dodany do twojej listy
ABS (UL 94 HB)
lava
AltText

A9193131

Hinged lid S, L Hinged lid for covering the dialogue zone on DIATEC S or for partially covering the dialog area on DIATEC L (on one side). 2 mounting holes ø 4,2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9193131

Hinged lid S, L
produkt został dodany do twojej listy
PC (UL 94 V-0)
clear
AltText

A9193132

Hinged lid S, L Hinged lid for covering the dialogue zone on DIATEC S or for partially covering the dialog area on DIATEC L (on one side). 2 mounting holes ø 4,2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9193132

Hinged lid S, L
produkt został dodany do twojej listy
PC (UL 94 V-0)
clear
AltText

A9194007

Slot-in panel The slot-in panel can be used as interior partition or separation, for example to protect the electronics when changing batteries. Integrated guide ridges, max. 2 slot-in panels each case.

Supply 1 slot-in panel

Zamknij

A9194007

Slot-in panel
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
156x30x3mm
AltText

A9194121

Hinged lid M Hinged lid for covering the dialogue zone. 2 mounting holes ø 4.2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9194121

Hinged lid M
produkt został dodany do twojej listy
PC (UL 94 V-0)
translucent
AltText

A9194122

Hinged lid M Hinged lid for covering the dialogue zone. 2 mounting holes ø 4.2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9194122

Hinged lid M
produkt został dodany do twojej listy
PC (UL 94 V-0)
translucent
AltText

A9194127

Hinged lid M Hinged lid for covering the dialogue zone. 2 mounting holes ø 4.2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9194127

Hinged lid M
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

A9194128

Hinged lid M Hinged lid for covering the dialogue zone. 2 mounting holes ø 4.2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9194128

Hinged lid M
produkt został dodany do twojej listy
ABS (UL 94 HB)
lava
AltText

A9194131

Hinged lid M Hinged lid for covering the dialogue zone. 2 mounting holes ø 4.2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9194131

Hinged lid M
produkt został dodany do twojej listy
PC (UL 94 V-0)
clear
AltText

A9194132

Hinged lid M Hinged lid for covering the dialogue zone. 2 mounting holes ø 4.2 mm necessary.

Supply 1 hinged lid, assembly kit

Zamknij

A9194132

Hinged lid M
produkt został dodany do twojej listy
PC (UL 94 V-0)
clear
AltText

A9207150

Anti-slide feet 6.5 x 2 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

Zamknij

A9207150

Anti-slide feet 6.5 x 2 mm
produkt został dodany do twojej listy
transparent
AltText

A9212330

Anti-slide feet 12 x 3.5 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

Zamknij

A9212330

Anti-slide feet 12 x 3.5 mm
produkt został dodany do twojej listy
transparent
AltText

B1360048

Wall suspension elements Two-part construction. The adapter is screwed down together with the base part of the case. Due to preshaped pockets, each case can be quickly and securely unlatched from the wall suspension element.

Supply 1 wall suspension element, 1 adapter 58 x 128 mm, assembly kit

Zamknij

B1360048

Wall suspension elements
produkt został dodany do twojej listy
ABS (UL 94 HB)
pebble grey RAL 7032

Opcje dostosowywania dla Diatec

Czego potrzebujesz do spersonalizowania, swojego produktu? Dostarczamy obudowy i pokrętła wraz ze wszystkimi niezbędnymi wymaganymi modyfikacjami.