Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
AltText

Datec-Terminal

Obudowy modułowe do operacyjnego gromadzenia danych

DATEC-TERMINAL jest wytrzymałym i atrakcyjnym systemem unikalnie zaprojektowanym, aby spełnić wymagania przy montażu na ścianie lub blacie podczas zbierania danych.

  • ergonomiczne miejsce kontaktów
  • pole robocze pochylone o 20°
  • na blat lub zawieszane na ścianę
  • tylne pokrywy do montażu standardowych małych skanerów
  • cztery rozmiary i dwa rodzaje
  • rozmiar M i L z wydzielonym miejscem na połączenia, który jest łatwo dostępny
  • szybki montaż oraz łatwy dostęp do elementów
  • montaż ukrytymi śrubkami
  • szeroka gama funkcjonalnych i wygodnych w użyciu akcesoriów
  • klasa szczelności IP 54 w połączeniu z osłoną i zamkniętą pokrywą
  • ukryty montaż ścienny
  • wewnętrzne słupki do mocowania płytek PCB, 100 x 160 mm lub podwójny standard eurocard (S, SL and L)
  • gładkie powierzchnie do indywidualnej obróbki i interfejsy
  • zagłębienia pod klawiaturę membranową
  • Przykłady aplikacji

Obszary zastosowań

  • Systemy gromadzenia danych na temat pracy i maszyn
  • Kontrola dostępu i zabezpieczeń
  • Pomiary i sterowanie
  • Grzewcze i klimatyzacyjne systemy
  • Medyczne zastosowania
  • Punkty ze sprzedażą
  • Wersje
  • Akcesoria
  • Opcje dostosowywania

Wybierz poniżej wersję / rozmiar lub przejrzyj pełną listę produktów.

AltText

B4013617

Cover S Suitable for DATEC-TERMINAL S. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.

Supply 1 cover, assembly kit

Zamknij

B4013617

Cover S
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
130x180x23mm
AltText

B4013621

Cover S Suitable for DATEC-TERMINAL S. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.

Supply 1 cover, assembly kit

Zamknij

B4013621

Cover S
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
130x180x23mm
AltText

B4013637

Cover S, convex Suitable for DATEC-TERMINAL S. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing from the front by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4013637

Cover S, convex
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
130x180x28mm
AltText

B4016417

Lid M closed, flat Lid M closed, flat to cover up the terminal compartment and for mounting of pocket scanners on a magnetic, inductive and chip-card base. List of suitable devices on demand.

Supply 1 lid, 2 screws M3

Zamknij

B4016417

Lid M closed, flat
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
134x62x24mm
AltText

B4016457

Lid M closed, high Lid M closed, high to cover up the terminal compartment and for mounting of pocket scanners on a magnetic, inductive and chip-card base. List of suitable devices on demand.

Supply 1 lid, 2 screws M3

Zamknij

B4016457

Lid M closed, high
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
134x67x38mm
AltText

B4016617

Cover M, flat Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4016617

Cover M, flat
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
168x220x29mm
AltText

B4016621

Cover M, flat Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4016621

Cover M, flat
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
168x220x29mm
AltText

B4016631

Cover M, convex Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4016631

Cover M, convex
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
168x220x29mm
AltText

B4016637

Cover M, convex Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4016637

Cover M, convex
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
168x220x29mm
AltText

B4016657

Cover M, high Suitable for DATEC-TERMINAL M, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4016657

Cover M, high
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
168x220x50mm
AltText

B4016671

Cover strip M / L For covering the area with the screws when using the convex cover. Simply snap-in. Colour coding possible, e.g. by inserting an individual coloured paper print. For the complete assembly there are 2 cover strips necessary.

Supply 1 cover strip

Zamknij

B4016671

Cover strip M / L
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
AltText

B4016677

Cover strip M / L For covering the screwing area when using the convex cover. Simply snap-in. For the complete assembly there are 2 cover strips necessary.

Supply 1 cover strip

Zamknij

B4016677

Cover strip M / L
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

B4016917

Lid M with card slot, one piece Lid M with slot, one piece for mounting of pull-through reading devices for magnetic cards. List of suitable devices on demand. Additional machining (milling) necessary. Support plate for installation of reading devices see accessories.

Supply 1 lid, 2 screws

Zamknij

B4016917

Lid M with card slot, one piece
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
134x67x38mm
AltText

B4026617

Cover SL Suitable for DATEC-TERMINAL SL. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.

Supply 1 cover, assembly kit

Zamknij

B4026617

Cover SL
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
264x180x23mm
AltText

B4026621

Cover SL Suitable for DATEC-TERMINAL S. For the protecting the electronic. With screw pillars for PCB fixing. Recessed area for protecting the membrane keyboard.

Supply 1 cover, assembly kit

Zamknij

B4026621

Cover SL
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
264x180x23mm
AltText

B4026637

Cover SL, convex Suitable for DATEC-TERMINAL SL. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing from the front by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4026637

Cover SL, convex
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
263x180x28mm
AltText

B4030417

Lid L closed, flat Lid L closed, flat to cover up the terminal compartment and for mounting of pocket scanners on a magnetic, inductive and chip-card base. List of suitable devices on demand.

Supply 1 lid, 2 screws M3

Zamknij

B4030417

Lid L closed, flat
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
268x62x24mm
AltText

B4030617

Cover L, flat Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4030617

Cover L, flat
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
302x220x29mm
AltText

B4030621

Cover L, flat Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protectingthe electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4030621

Cover L, flat
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
302x220x29mm
AltText

B4030631

Cover L, convex Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4030631

Cover L, convex
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
302x220x29mm
AltText

B4030637

Cover L, convex Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronics. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Cover strips in transparent or off-white necessary as separate article. Fixing of vers. I from the front by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4030637

Cover L, convex
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
302x220x29mm
AltText

B4030657

Cover L, high Suitable for DATEC-TERMINAL L, basic housing vers. I, II, III. For protecting the electronic. Recessed operating area (1 mm) for protecting the membrane keyboard. With screw pillars for PCB fixing. Fixing of vers. I from the rear by 4 screws.

Supply 1 cover, assembly kit

Zamknij

B4030657

Cover L, high
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
302x220x50mm
AltText

B4030917

Lid L with card slot, one piece Lid L with slot, one piece for mounting of pull-through reading devices for magnetic cards. List of suitable devices on demand. Additional machining (milling) necessary. Support plate for installation of reading devices see accessories.

Supply 1 lid, 2 screws

Zamknij

B4030917

Lid L with card slot, one piece
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
268x67x38mm
AltText

B4113106

Front panel S Front panel S for the mounting of all kinds of operating elements.

Supply 1 front panel, 4 screws diameter 4.0 mm

Zamknij

B4113106

Front panel S
produkt został dodany do twojej listy
Aluminium
matt anodised
125,9x176x2mm
AltText

B4113126

Profile plate S Profile plate S for the mounting of operating elements of all kinds. Especially designed for the use of membrane keyboards. Recessed area for protecting the operating elements.

Supply 1 profile plate, 4 screws, 2 cover strips

Zamknij

B4113126

Profile plate S
produkt został dodany do twojej listy
Aluminium
matt anodised
130x180x8mm
AltText

B4113147

Wall suspension element S Wall suspension element S for easy and secure fixing of the unit to a wall. The case is screwed down with the wall suspension element.

Supply 1 wall suspension element, 2 screws

Zamknij

B4113147

Wall suspension element S
produkt został dodany do twojej listy
Steel
galvanized
79x137x8mm
AltText

B4113671

Cover strip S / SL For covering the area with the screws when using the convex cover. Simply snap-in. Colour coding possible, e.g. by inserting an individual coloured paper print. For the complete assembly there are 2 cover strips necessary.

Supply 1 cover strip

Zamknij

B4113671

Cover strip S / SL
produkt został dodany do twojej listy
PC (UL 94 V-0)
transparent
AltText

B4113677

Cover strip S / SL For covering the screwing area when using the convex cover. Simply snap-in. For the complete assembly there are 2 cover strips necessary.

Supply 1 cover strip

Zamknij

B4113677

Cover strip S / SL
produkt został dodany do twojej listy
ABS (UL 94 HB)
off-white RAL 9002
AltText

B4116106

Front panel MS Front panel MS for the mounting of all kinds of operating elements. When using cover, please refer to front panel MH (accessory).

Supply 1 front panel, 4 screws diameter 5.0 mm

Zamknij

B4116106

Front panel MS
produkt został dodany do twojej listy
Aluminium
matt anodised
165,4x217,4x2mm
AltText

B4116116

Front panel MH Front panel MH used when case is fitted with a cover. Suitable for mounting of all kinds of operating elements under the cover.

Supply 1 front panel, 4 screws diameter 3 mm

Zamknij

B4116116

Front panel MH
produkt został dodany do twojej listy
Aluminium
matt anodised
128x209x2mm
AltText

B4116126

Profile plate M Profile plate M for mounting operating elements of all kinds. Especially designed for the use with membrane keyboards. Recessed area for protecting the operating elements.

Supply 1 profile plate, 4 screws, 2 cover strips

Zamknij

B4116126

Profile plate M
produkt został dodany do twojej listy
Aluminium
matt anodised
168x220x8mm
AltText

B4116136

Support plate L and M Suitable for lid L (B4030917) and lid M (B4016917) with card slot, one piece. Support plate for installation of most popular types of card readers.

Supply 1 support plate, 2 screws diameter 2.5 mm

Zamknij

B4116136

Support plate L and M
produkt został dodany do twojej listy
Aluminium
matt anodised
102x45x1mm
AltText

B4116147

Wall suspension element M Wall suspension element M for easy and secure fixing of the unit to a wall. Securing by 2 screws in the lateral pocket sections in the terminal compartment.

Supply 1 wall suspension element, 2 screws M3

Zamknij

B4116147

Wall suspension element M
produkt został dodany do twojej listy
Steel
galvanized
214x126x12mm
AltText

B4126106

Front panel SL Front panel SL for mounting of all kinds of operating elements.

Supply 1 front panel, 4 screws diameter 4.0 mm

Zamknij

B4126106

Front panel SL
produkt został dodany do twojej listy
Aluminium
matt anodised
259,4x176x2mm
AltText

B4126126

Profile plate SL Profile plate SL for the mounting of operating elements of all kinds. Especially designed for the use of membrane keyboards. Recessed area for protecting the operating elements.

Supply 1 profile plate, 4 screws, 2 cover strips

Zamknij

B4126126

Profile plate SL
produkt został dodany do twojej listy
Aluminium
matt anodised
263x180x8mm
AltText

B4126147

Wall suspension element SL Wall suspension element SL for easy and secure fixing of the unit to a wall. The case is screwed down with the wall suspension element.

Supply 1 wall suspension element, 2 screws

Zamknij

B4126147

Wall suspension element SL
produkt został dodany do twojej listy
Steel
galvanized
210x137x8mm
AltText

B4130106

Front panel LS Front panel LS for the mounting of all kinds of operating elements. When using cover, please refer to front panel LH (accessory).

Supply 1 front panel, 4 screws diameter 5.0 mm

Zamknij

B4130106

Front panel LS
produkt został dodany do twojej listy
Aluminium
matt anodised
299,4x217,4x2mm
AltText

B4130116

Front panel LH Front panel LH used when case is fitted with a cover. Suitable for mounting of all kinds of operating elements under the cover.

Supply 1 front panel, 4 screws diameter 3 mm

Zamknij

B4130116

Front panel LH
produkt został dodany do twojej listy
Aluminium
matt anodised
262x209x2mm
AltText

B4130126

Profile plate L Profile plate L for mounting operating elements of all kinds. Especially designed for the use with membrane keyboards. Recessed area for protecting the operating elements.

Supply 1 profile plate, 4 screws, 2 cover strips

Zamknij

B4130126

Profile plate L
produkt został dodany do twojej listy
Aluminium
matt anodised
302x220x8mm
AltText

B4130147

Wall suspension element L Wall suspension element L for easy and secure fixing of the unit to a wall. Securing by 2 screws in the lateral pocket sections in the terminal compartment.

Supply 1 wall suspension element, 2 screws M3

Zamknij

B4130147

Wall suspension element L
produkt został dodany do twojej listy
Steel
galvanized
214x260x12mm

Opcje dostosowywania dla Datec-Terminal

Czego potrzebujesz do spersonalizowania, swojego produktu? Dostarczamy obudowy i pokrętła wraz ze wszystkimi niezbędnymi wymaganymi modyfikacjami.