Zaawansowane wyszukiwanie Część Nr.
Zaloguj Your location/language Germany, Polski
AltText

Body-Case

Mała obudowa z polotem - wygodna do noszenia na ciele

OKW BODY-CASE jest obudową w pełeni przystosowaną do noszenia. Projekt jest idealny dla tak zwanych "wearable technologies": na ramię, szyję, spodnie, koszule lub kieszenie, albo luzem.

  • specjalna obudowa do podzespołów i czujników, które są noszone na ciele lub w pobliżu ciała
  • spełnia swoją funkcję w najprostszy sposób, bez ograniczania użytkownika i nie rzucając się w oczy
  • nowoczesny wygląd z wysoko polerowanymi powierzchniami i matowy pierścień uszczelniający z TPV.
  • łatwe rozróżnienie poprzez stosowanie indywidualnych, ekskluzywnych bransoletek (szerokość 18 mm)
  • łatwa obsługa za pomocą przycisków lub paneli dotykowych, za pomocą komend głosowych lub gestów
  • transmisja bezprzewodowa
  • wysokiej klasy szczelności IP 65
  • formowane tworzywo ASA o wysokim   współczynniku ochrony przed promieniowaniem UV
  • wewnętrzne zasilanie za pomocą guzikowych baterii, które są zamontowane bezpośrednio na płytce drukowanej - ewentualnie, zastosowanie akumulatora ładowanego indukcyjnie
  • górna część z / bez wpuszczonej powierzchni pod folię dekoracyjną lub klawiaturę membranową
  • montaż obudowy czterema śrubami Torx z wysokiej jakości stali nierdzewnej; dwa teleskopy do paska lub montażu akcesoriów
  • akcesoria opcjonalne (M, L): Pasek na nadgarstek, zestaw mocujący (klips, oczko) itp.
  • akcesoria opcjonalne (XL): Pasek na nadgarstek i zestaw mocujący (klips, oczko)
  • Wideo
  • Przykłady aplikacji

Obszary zastosowań

  • Bezprzewodowe urządzenie zapisujące z transmisją danych, śledzenie i monitorowanie, wywołanie alarmowe oraz systemy powiadamiania, a także czujniki bio do monitorowania stanu zdrowia, technologie medyczne, terapeutycznych i społecznych dziedzinach
  • Wearables
  • IoT/ IIoT
  • Systemy połączeń alarmowych i powiadomień
  • Sprzęt do śledzenia i monitorowania
  • Czujniki bio-sprzężenia zwrotnego w dziedzinie opieki zdrowotnej, technologii medycznej, w dziedzinach terapeutycznych i społecznych
  • Wypoczynek i sport
  • Technologii komunikacji
  • Sprzedaży akcji i rejestrowania
  • Inżynierii bezpieczeństwa
  • Techniki sterowania i automatyzacji
  • Praca, gdzie wymagana jest lokalizacja
  • Przeglądaj pełną listę
  • Akcesoria
  • Opcje dostosowywania
AltText

B1604107

BODY-CASE M, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1604107

BODY-CASE M, without recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
50x41x15mm
IP 65
AltText

B1604117

BODY-CASE M, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1604117

BODY-CASE M, without recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
50x41x15mm
IP 65
AltText

B1604207

BODY-CASE M, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1604207

BODY-CASE M, with recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
50x41x14mm
IP 65
AltText

B1604217

BODY-CASE M, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1604217

BODY-CASE M, with recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
50x41x14mm
IP 65
AltText

B1606107

BODY-CASE L, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1606107

BODY-CASE L, without recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
55x46x17mm
IP 65
AltText

B1606117

BODY-CASE L, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1606117

BODY-CASE L, without recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
55x46x17mm
IP 65
AltText

B1606207

BODY-CASE L, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1606207

BODY-CASE L, with recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
55x46x16mm
IP 65
AltText

B1606217

BODY-CASE L, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1606217

BODY-CASE L, with recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
55x46x16mm
IP 65
AltText

B1608107

BODY-CASE XL, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1608107

BODY-CASE XL, without recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x56x18mm
IP 65
AltText

B1608117

BODY-CASE XL, without recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version Without recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1608117

BODY-CASE XL, without recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x56x18mm
IP 65
AltText

B1608207

BODY-CASE XL, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1608207

BODY-CASE XL, with recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x56x17mm
IP 65
AltText

B1608217

BODY-CASE XL, with recess Modern small enclosure specifically designed for "wearable technologies". Three-part design consisting of highly polished top and bottom parts and a matt TPV sealing ring.
Recessed area in top for locating a membrane keyboard or decor foil. Location bars for a PCB are provided in the top part; after assembly of the enclosure the PCB is then held securely between the top and bottom parts. Internal power supply with round or button cells on the PCB, or alternatively, the use of a rechargeable battery with charging coil for charging the device inductively.
Wrist strap, fastening kit etc. as accessories.

Note
For this individual product, options shown in the tab "view customising options" only apply to modifications of the top and bottom parts of the enclosure. Modifications of the TPV sealing ring are not possible.

Version With recess

Supply Top and bottom parts, sealing ring, 4 M2 x 6 mm enclosure screws (T6), 2 spring bars (18 mm)

Zamknij

B1608217

BODY-CASE XL, with recess
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x56x17mm
IP 65
AltText

A0325080

Self-tapping screws 2.5 x 8 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.

Supply 1 self-tapping screw

Zamknij

A0325080

Self-tapping screws 2.5 x 8 mm (PZ1)
produkt został dodany do twojej listy
AltText

A0399T06

Torx T6 screwdriver Screwdriver with ergonomic handle for reliably turning, tightening and loosening Torx T6 type screws. (The original part may differ from the part shown in the picture.)

Supply 1 T6 screwdriver

Zamknij

A0399T06

Torx T6 screwdriver
produkt został dodany do twojej listy
AltText

A9164001

Key ring Version: diameter = 20.5 mm.

Supply 1 key ring

Zamknij

A9164001

Key ring
produkt został dodany do twojej listy
Steel
nickel-plated
20,5mm
AltText

B1704017

Station M For storing BODY-CASE M when not in use, and for fitting electronics, in particular for inductive charging of the device. Guides in the top part allow the enclosure to be easily located into position. On request, the stations can be mounted in series, for example as a charging console.

Exception: enclosure with belt / pocket clip. Inductive charging is not possible here.

Supply Top part, bottom panel, assembly kit

Zamknij

B1704017

Station M
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x50x17mm
AltText

B1704807

Station M (Mountable) Station top part only, for mounting individually or in series on a table stand, equipment housing or the like. Used as a storage or charging cradle for BODY-CASE M when it is not in use. For example, inductive charging electronics can be fitted inside. Guides in the top allow the enclosure to be easily located into position. An accessory seal (B1706003) is available for IP 54 protection class. Download the drawing for the mounting cut-out details.

Exception: enclosure with belt / pocket clip. Inductive charging is not possible here.

Supply 1 top part

Zamknij

B1704807

Station M (Mountable)
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x50x17mm
AltText

B1706001

Eyelet / pocket clip kit Special accessories for BODY-CASE. Kit consisting of 1 pocket clip for shirt or trouser pocket, 1 fastening eyelet for lanyard/chain/cord as well as 2 covers for closing one or both rear wrist strap attachments if required. Fastening with spring bars (supplied with the enclosures).

Supply 1 kit

Zamknij

B1706001

Eyelet / pocket clip kit
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
AltText

B1706003

Seal, for Station (Mountable) M/L Application: Fits into a groove in the top part of the size M and size L Stations (Mountable) for increasing the protection class.

Supply 1 seal

Zamknij

B1706003

Seal, for Station (Mountable) M/L
produkt został dodany do twojej listy
AltText

B1706017

Station L For storing BODY-CASE L when not in use, and for fitting electronics, in particular for inductive charging of the device. Guides in the top part allow the enclosure to be easily located into position. On request, the stations can be mounted in series, for example as a charging console.

Exception: enclosure with belt / pocket clip. Inductive charging is not possible here.

Supply Top part, bottom panel, assembly kit

Zamknij

B1706017

Station L
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x50x17mm
AltText

B1706202

Wrist strap, 18 mm Special wrist strap made of silicone for BODY-CASE: elastic, waterproof and comfortable to wear. The smooth surface is also easy to clean. Spring bar width 18 mm. Total length without buckle approx. 193 mm. Buckle made of stainless steel. Fastening with spring bars (supplied with the enclosures).

Supply 1 wrist strap

Zamknij

B1706202

Wrist strap, 18 mm
produkt został dodany do twojej listy
Silicone
black
AltText

B1706203

Spring bar tool Tool with "fork-shaped" end for the easy insertion and removal of the spring bars of the wrist strap, belt / pocket clip, eyelet and covers. Pointed end suitable as an instrument for pushing out pins in metal wrist straps with flexible chain links, or in buckles. (The original part may differ from the part shown in the picture.)

Supply 1 Spring bar tool

Zamknij

B1706203

Spring bar tool
produkt został dodany do twojej listy
Stainless steel
AltText

B1706807

Station L (Mountable) Station top part only, for mounting individually or in series on a table stand, equipment housing or the like. Used as a storage or charging cradle for BODY-CASE L when it is not in use. For example, inductive charging electronics can be fitted inside. Guides in the top allow the enclosure to be easily located into position. An accessory seal (B1706003) is available for IP 54 protection class. Download the drawing for the mounting cut-out details.

Exception: enclosure with belt / pocket clip. Inductive charging is not possible here.

Supply 1 top part

Zamknij

B1706807

Station L (Mountable)
produkt został dodany do twojej listy
ASA (UL 94 HB)
traffic white RAL 9016
62x50x17mm
AltText

B9100063

Carrying strap, textile lanyard Textile lanyard with loop attachment.

ATTTENTION, PART TO BE DISCONTINUED:
The article is only available in limited quantities. Please ask for it!

Supply 1 lanyard

Zamknij

B9100063

Carrying strap, textile lanyard
produkt został dodany do twojej listy
black
860mm

Opcje dostosowywania dla Body-Case

Czego potrzebujesz do spersonalizowania, swojego produktu? Dostarczamy obudowy i pokrętła wraz ze wszystkimi niezbędnymi wymaganymi modyfikacjami.