Búsqueda avanzada N.º de pedido
Iniciar sesión Your location/language Germany, Español
AltText

In-Box

Cajas industriales robustas

Ya sea como caja para instalación de terminales, o para equipos electrónicos, la serie IN-BOX ofrece opciones versátiles para los ingenieros eléctricos y electrónicos.

  • 9 cajas básicas de acabado brillante y diferentes alturas.
  • Dos materiales estándar: ABS (UL 94 HB) o PC (V-2);
    Todas las cajas en PC cumplen la normativa de protección ignífuga UL 94 5V (mejor que V-0), aunque el material sólo tenga la clasificación V-2.
  • Elevadas categorías de protección IP 66/67; el aislamiento de goma va preinstalado en la parte superior.
  • Gran resistencia a impactos IK07 (ABS), IK08 (PC).
  • Parte superior del mismo color que la parte inferior o transparente.
  • Cierre rápido eficiente con tornillos de cuarto de vuelta en acero inoxidable.
  • Panel de control rebajado para proteger el teclado de membrana.
  • Montaje desde el interior directamente a la pared o desde el exterior mediante escuadras de fijación; en caso necesario de una bisagra interior para su instalación, existe como accesorio.
  • Precintado de seguridad opcional para impedir accesos no autorizados a la caja.
  • Railes DIN normalizados y placas de montaje para una configuración de instalación personalizada.
  • Torretas de fijación integrados para placas de circuito impreso, raíles DIN y placas y piezas de montaje.
  • Ejemplos de aplicación

Application fields

  • Pensada para su uso en instalaciones eléctricas, como en tecnologías de calefacción, climatización y ventilación, dispositivos de mando y de control, construcción de maquinaria e instalaciones, tecnologías de seguridad, etc.
  • También puede emplearse en el sector de la electrónica, como, por ejemplo, instrumentos de medición digitales y analógicos, sensores, carcasas para interfaces, alarmas, etc.
  • Smart Factory / Industrie 4.0
  • Versiones
  • Accesorios
  • Modificaciones específicas del cliente
AltText

C2306917

Pressure equalisation element M6x0.75 Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply 1 pressure equalisation element, 1 seal washer, 1 nut

Cerrar

C2306917

Pressure equalisation element M6x0.75
Producto añadido a su lista
PA 6 (UL 94 HB)
light grey RAL 7035
IP 56
AltText

C2310917

Pressure equalisation element M10x1 Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 19.5 L/min - 0.25 bar; 43.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).

Supply 1 pressure equalisation element, 1 seal washer, 1 nut

Cerrar

C2310917

Pressure equalisation element M10x1
Producto añadido a su lista
PA 6 (UL 94 HB)
light grey RAL 7035
IP 56
AltText

C2320137

Cable grommet Simple cable grommet, easy to install, with easy-to-pierce membrane. Tight fit as soon as the cable is pulled backwards a little. Free of halogens. Suitable for wall thicknesses from 1 - 4 mm and for cable diameters from 8 - 13 mm. Operating temperatures from -40°C to +100°C. Borehole ø 20.5 mm.

Supply 1 cable grommet

Cerrar

C2320137

Cable grommet
Producto añadido a su lista
EPDM
light grey RAL 7035
IP 67
AltText

C7100092

Wall-mounting brackets Wall-mounting brackets made of plastic for external wall mounting. Installation above, below or laterally, as required.

Supply 4 wall-mounting brackets incl. fasteners

Cerrar

C7100092

Wall-mounting brackets
Producto añadido a su lista
PC GF15
AltText

C7100128

Security kit To secure the enclosure against unauthorised access.

Supply 1 security kit

Cerrar

C7100128

Security kit
Producto añadido a su lista
PP
AltText

C7100138

Security kit To secure the enclosure against unauthorised access.

Supply 1 security kit

Cerrar

C7100138

Security kit
Producto añadido a su lista
PP
AltText

C7100142

Inside hinge For converting the top part of the enclosure into a folding door.

Supply 2 hinges, fastening screws with drill template

Cerrar

C7100142

Inside hinge
Producto añadido a su lista
PC
AltText

C7100167

Screw 3.9 x 9 mm For fitting standard DIN rails, mounting plates, PCBs, components etc.

Supply 1 self-tapping screw

Cerrar

C7100167

Screw 3.9 x 9 mm
Producto añadido a su lista
AltText

C7110056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7110056

Mounting plate
Producto añadido a su lista
73x53x2,5mm
AltText

C7110077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7110077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
66x35x7,5mm
AltText

C7110087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7110087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
66x15x5,5mm
AltText

C7111056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7111056

Mounting plate
Producto añadido a su lista
91x73x2,5mm
AltText

C7111077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7111077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
104x35x7,5mm
AltText

C7111087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7111087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
104x15x5,5mm
AltText

C7112056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7112056

Mounting plate
Producto añadido a su lista
113x93x2,5mm
AltText

C7112077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7112077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
108x35x7,5mm
AltText

C7112087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7112087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
108x15x5,5mm
AltText

C7113056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7113056

Mounting plate
Producto añadido a su lista
131x73x2,5mm
AltText

C7113077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7113077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
144x35x7,5mm
AltText

C7113087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7113087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
144x15x5,5mm
AltText

C7114056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7114056

Mounting plate
Producto añadido a su lista
131x113x2,5mm
AltText

C7115056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7115056

Mounting plate
Producto añadido a su lista
171x113x2,5mm
AltText

C7115077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7115077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
184x35x7,5mm
AltText

C7115087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7115087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
184x15x5,5mm
AltText

C7116056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7116056

Mounting plate
Producto añadido a su lista
171x143x2,5mm
AltText

C7116077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7116077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
168x35x7,5mm
AltText

C7116087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7116087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
168x15x5,5mm
AltText

C7117056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7117056

Mounting plate
Producto añadido a su lista
220,5x152,5x2,5mm
AltText

C7117077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7117077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
220x35x7,5mm
AltText

C7117087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7117087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
220x15x5,5mm
AltText

C7118056

Mounting plate Mounting plate made of insulating material with 4 holes drilled in it, for attachment in the bottom part of the enclosure.

Supply 1 mounting plate

Cerrar

C7118056

Mounting plate
Producto añadido a su lista
270,5x222,5x2,5mm
AltText

C7118077

Standard DIN rail, Type TH 35 Standard DIN-rail in accordance with DIN EN 60715, 35 x 7.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 35

Cerrar

C7118077

Standard DIN rail, Type TH 35
Producto añadido a su lista
Steel
283,5x35x7,5mm
AltText

C7118087

Standard DIN rail, Type TH 15 Standard DIN-rail in accordance with DIN EN 60715, 15 x 5.5 mm. For mounting terminal blocks and components in the enclosure.

Supply 1 standard DIN rail TH 15

Cerrar

C7118087

Standard DIN rail, Type TH 15
Producto añadido a su lista
Steel
283,5x15x5,5mm

Opciones de productos para In-Box

¿Qué necesita en su producto personalizado? En caso necesario, le suministramos las cajas y botones giratorios listas para el montaje con todas las modificaciones y acabados precisos.