Target group selection "Outdoor.Measure.Control"

Nowadays we encounter many different kinds of control units for data acquisition and transmission in our everyday lives. This means that thinking in form and function is all the more important in the development of cases and operating elements.

In today's age, mobility is playing a more and more important role. What is important for users is a case that feels good in the hand, that is robust and that is waterproof and dustproof. This means that they can easily be used in rough conditions as well. The hand-held case sector is one of the main areas of our developments. This makes it possible for us to present to you the whole variety of our system.

Ergonomics and robustness are equally significant in stationary applications. Each range of cases made by OKW is ideal for special tasks. Benefit from them!

In the following you will find a selection of case and tuning knob solutions for your application.
Acc. Combination Knobs

Acc. Combination Knobs
Well adjusted

Large number of accessories:

  • covers in different colours, with/without indicator line
  • arrow disks, disks, dials
  • nut cover
  • locking device with stator, locking device
  • adjusting key, spanner
  • round nut, torsion protection etc.

Blob

Blob
Modelled for your hand

Inspired by the touch sensation, the design is entirely geared to the needs of the user.

  • 3 BLOB types, "UNIT", "CONTROL" and "PANEL" following the principles of "Universal Design"
  • supports applications that are flexible enough to meet the needs of a large number of people with different hand sizes and grasping volumes
  • high level of practical value thanks to a convincing 3D touch sensation
  • easy to handle, pleasant to hold, exact to guide and to operate
  • gentle and at the same time rugged



Carrytec

Carrytec
Comfortable to carry

CARRYTEC is unique in offering a functional handle for many different tasks and situations, indoors and outdoors.

  • non-slip carrying option above the centre of gravity of the enclosure
  • rear installation on tripod or support arm systems; fast positioning / alignment of the visible and operating panels, orderly cable routing
  • especially large surface area that is ideal for user interfaces (8.4"/21 cm; M: 10.4"/26 cm; L: 13,4"/34 cm)
  • protected installation of interfaces
  • secure storage on table stand and/or wall suspension element
  • holding clamps for mounting on round tubes and equipment rails DIN EN ISO 19054
  • versions in reinforced, impact-resistant plastic stand up to tough conditions
  • enclosures are easy to clean
  • protection bags for instruments, sensors, accessories etc.; available July 2013



Com-Knobs

Com-Knobs
Geared to design aesthetics

Modern tuning knob series for a innovative image of your devices.

  • with proven collet fixing (4.6 or 8 mm, 1/4")
  • matching colours for an up-to-date Fronted-Design
  • with/without marking element "Peak"
  • covers 40/50 mm also with finger grip available
  • available in 6 sizes (diameter 16 - 50 mm)

Combination Knobs collet fixing

Combination Knobs collet fixing
Well adjusted

Proven tuning knobs for electromechanical rotary potentiometers.

  • with collets for round shaft ends corresponding to DIN 41591
  • 8 sizes ranging from 10 - 50 mm diameter available
  • as round/wing or spindle-shaped knob, with/without indicator line
  • large range of accessories: covers, disks, nut covers, etc. see product group Combination Knobs-Accessories

Datec-Control

Datec-Control
The display professionals

The generous hand-held case programme for graphic modules.

  • sizes L and M: spacious display and operating area · space for mounting of PCMCIA cards · charging station as desk top or wall mounted version · changeable battery compartment for up to 5 x AA mignon cells, to be locked · Protector absorbs impacts and for surface protection (acc.)
  • sizes XS and S: with smaller grip starting from 58 mm and large display area · additional battery compartments for 2, 3 or 4 x AA mignon cells or 9 V flat battery · Protector absorbs impacts and for surface protection (acc.) · Station for charging electronics (acc.)

Datec-Mobil-Box

Datec-Mobil-Box
Mobile data collector

The large range of hand-held cases for the mobile data recording.

  • with display window for commercial LCDs or with closed top part
  • with/without battery compartment for 1.5 V mignon cells or 9 V flat battery
  • plain area for interfaces
  • display windows as accessories protect the installed units
  • high protection class up to IP 65 when using the sealing kit
  • many accessories: tilt foot bars, battery clips, etc.

Datec-Pocket-Box

Datec-Pocket-Box
Compact technology

Programme of small cases, especially robust and sealed for mobile applications.

  • ideal for cable-connected or battery-supported remote controls
  • with battery compartment resp. with integrated supports
  • additional versions in plexiglass, infra-red permeable
  • recessed operating area for membrane keyboards
  • suitable clip as accessory
  • high protection class up to IP 54 with sealing

Datec-Terminal

Datec-Terminal
Professional operational data collection

The multifunctional case system for table top and wall mounted applications.

  • standard case for the operational data recording
  • ergonomic shape
  • installation of standard plug-in/slide-in reader systems
  • hidden wall mounting and plain areas
  • sizes L and M: with electronic and terminal compartment
  • sizes S and SL: without terminal compartment

Hand-Held-Boxes

Hand-Held-Boxes
Digital or analogue

Proven case system for measuring and mobile data recording.

  • cases compatible to handle, prepared for the installation
    •   of digital and analog displays
  • with large/small and recessed operating area for keyboards
  • HAND-HELD-BOX with/without slide switch; battery compartment
  • HAND-HELD-BOX N with tilt foot bar as accessory

Hand-Terminal

Hand-Terminal
Robust grip

The special case system for decentralised electronics components.

  • robust cases made of impact resistant, especially handy
  • plenty of space for operating elements, displays and electronic components
  • with closed operating area (I) or with frame cover for front panel insert (II)
  • high protection class up to IP 65 in conjunction with the sealing kits (case, front panel)

Interface-Terminal

Interface-Terminal
Interface professional

The INTERFACE-TERMINAL is predestined for data visualisation and additionally offers a maximum ease of use.

  • the new interface between a stationary and a mobile component
    click here for a film (flash file)
  • unique variety of applications: mobile, desk-top, wall mounted
  • operating panel in vertical or horizontal orientation
  • a lot of space for operating elements, graphic displays/touch screens (6.4" - 10.4") and electronic
  • ergonomically designed for operating and reading off
  • 3 sizes: S, M, L
  • protection class up to IP 54: with sealings (accessories)
  • available as assembly units for individual combinations
  • New: installation assembly kit with elegant high-gloss design frame, individual colours and finish

Minitec

Minitec
The perfect companion

The MINITEC cases convince their users thanks to their mini-dimensions and maximum benefits.

  • modern, flat styling *** iF product design award 2009 ***
  • easy to wear and always within easy reach, e.g. round your neck or as wrist strap, with a wrist strap or on a keyring.
  • intermediate ring in different versions and colour; TPE ring for a pleasant touch sensation and as impact protection
  • also available in infra-red light-permeable PMMA plexiglass
  • 2 different shapes ("D" and "E") en 3 different sizes (S/M/L)
  • protection class IP 41: types E (size M) and D (sizes S and M) with intermediate ring, all other IP 40
  • available as assembly units for individual combinations

SMART-BOX

SMART-BOX
Smart goes down well

Rounded surfaces create a pleasantly smarte appearance and underline the impressive qualities of the new range of cases SMART-BOX.

  • high-quality material ABS (UL 94 V-0), flame-retardant and self-extinguishing
  • available in 7 sizes
  • folded trims allow invisible screw attachments
  • cover retention device already included in the supply

Senso-Case

Senso-Case
The way ahead

The first standard enclosure for ergonomically favourable single-handed operation. Ideal for specific measuring, controlling and recording of data.

  • recessed control panel for membrane and silicone keyboards, pushbuttons and display modules
  • simultaneous operation using standard/rechargeable batteries and cable possible, battery compartment as accessory
  • cable strain relief (acc.) form an attractive connection
  • with/without push-buttom

Shell-Type Cases

Shell-Type Cases
The system with 1001 possibilities

perfected case system for the universal use.

  • available in 4 sizes, each in 3 heights
  • 3 different case types:
      V: open front, closed rear
      O: front and rear open
      G: front and rear closed
  • also with battery compartment or recessed operating area

Slide Control Knobs

Slide Control Knobs
Correctly regulated

Proven knobs for slide potentiometer.

  • for mounting onto two different potentiometers
  • different versions

Smart-Case

Smart-Case
Good to hold

Series of small cases in handy pocket size.

  • curved shape, convincing by unsurpassed handiness
  • for remote controls with/without cable for low voltage applications
  • vesions with/without battery compartment, in plexiglass, infrared-permeable
  • protection class partly up to IP 65 when using the sealing kit
  • suitable clip and support for secure deposit as accessories
  • new: station S, M & L for desk-top applications
  • 4 case sizes

Soft-Case

Soft-Case
A wide format

The first standard case in pocket-format with "orientation towards the width".

  • user-friendly shape, ideal for miniaturised electronic applications
  • spacious interface area as well as enough space for bigger displays
  • additional versions in PMMA infra-red permeable and BIOGRADE® off-white
  • intermediate ring for more installation height as accessory,
    • in TPE-version usable a a sealing ring (up to IP 54 without battery compartment) and impact protection
  • intermediate ring also in PMMA, ABS off-white & lava, ABS chromed or BIOGRADE® off-white
  • practical combination clip usable as wall-holder and pocket clip

Star-Knobs

Star-Knobs
Luminous Control

New tuning knob range, predestinated for the application of central user inerfaces.

  • two installation versions (surface-mounted or flush-fitting)
  • optional illumination with SMD LED technology possible
  • ergonomic design: finger recess (lid), knurls and inclined body (knob)
  • tried and tested collet fixture system (6 mm, 8 mm, 1/4")
  • max. torque: assembly = 1.5 Nm, function = 1.2 Nm
  • two sizes (33 and 41 mm)
  Link to STAR-KNOBS configurator (.xls)

Top-Knobs

Top-Knobs
Designer knobs

Homogenous tuning knobs with a modern design.

  • with lateral screw fixing for:
    4 mm, 6 mm, 1/4" and flattened axes
  • available in 5 sizes from 16-40 mm diameter
  • 5 different and individually interchangeable marking elements
  • IF award 1996 decorated

Tuning Knobs lateral screw fixing

Tuning Knobs lateral screw fixing
Large selection of types

Proven tuning knobs for electromechanical rotary potentiometers.

  • with lateral screw fixing
  • different versions

Vario-Box

Vario-Box
Easily adaptable

The case system with many variation possibilities.

  • for table top and wall mounted applications (hidden wall mounting)
  • available as components or as complete kit
  • protection class IP 65 with cover
  • protection class IP 64 with front frame or frame cover
  • protection class IP 54 if closed with front panel
  • many accessories: tilt feet, handle, lock, etc.