Target group selection "Factory.Security"

Acc. Combination Knobs
Well adjusted

Large number of accessories:

• covers in different colours, with/without indicator line
• arrow disks, disks, dials
• nut cover
• locking device with stator, locking device
• adjusting key, spanner
• round nut, torsion protection etc.

Carrytec
Comfortable to carry

CARRYTEC is unique in offering a functional handle for many different tasks and situations, indoors and outdoors.

• non-slip carrying option above the centre of gravity of the enclosure
• rear installation on tripod or support arm systems; fast positioning / alignment of the visible and operating panels, orderly cable routing
• especially large surface area that is ideal for user interfaces (8.4"/21 cm; M: 10.4"/26 cm; L: 13,4"/34 cm)
• protected installation of interfaces
• secure storage on table stand and/or wall suspension element
• holding clamps for mounting on round tubes and equipment rails DIN EN ISO 19054
• versions in reinforced, impact-resistant plastic stand up to tough conditions
• enclosures are easy to clean
• protection bags for instruments, sensors, accessories etc.; available July 2013

Com-Knobs
Geared to design aesthetics

Modern tuning knob series for a innovative image of your devices.

• with proven collet fixing (4.6 or 8 mm, 1/4")
• matching colours for an up-to-date Fronted-Design
• with/without marking element "Peak"
• covers 40/50 mm also with finger grip available
• available in 6 sizes (diameter 16 - 50 mm)

Combination Knobs collet fixing
Well adjusted

Proven tuning knobs for electromechanical rotary potentiometers.

• with collets for round shaft ends corresponding to DIN 41591
• 8 sizes ranging from 10 - 50 mm diameter available
• as round/wing or spindle-shaped knob, with/without indicator line
• large range of accessories: covers, disks, nut covers, etc. see product group Combination Knobs-Accessories

DIN-Modular Cases Type A
Rational locking assembly

Case series for the mounting into cabinets following DIN IEC 61 554.

• available in 7 sizes and different lengths
• case and front frame made of one part
• easy and quick assembly of the individual parts
• made of Noryl UL94 V-O, self-extinguishing and shock-resistant
• PCB fixing through the rear frame
• protection cover, front/rear panel as accessories

DIN-Modular Cases Type B
Mounting of PCBs from the front and above

Case series for the mounting into cabinets according to DIN IEC 61554.

• available in 6 sizes, 3 different types
• made of reinforced Noryl UL94 V-1
• rear with guide ridges for PCBs
• rear also with slots for connectors
• protection cover as accessory makes protection class IP 53 possible

Datec-Keyboard
For a rough environment

The special designed keyboard housing for local data recording.

Datec-Mobil-Box
Mobile data collector

The large range of hand-held cases for the mobile data recording.

• with display window for commercial LCDs or with closed top part
• with/without battery compartment for 1.5 V mignon cells or 9 V flat battery
• plain area for interfaces
• display windows as accessories protect the installed units
• high protection class up to IP 65 when using the sealing kit
• many accessories: tilt foot bars, battery clips, etc.

Datec-Terminal
Professional operational data collection

The multifunctional case system for table top and wall mounted applications.

• standard case for the operational data recording
• ergonomic shape
  
• installation of standard plug-in/slide-in reader systems
• hidden wall mounting and plain areas
• sizes L and M: with electronic and terminal compartment
• sizes S and SL: without terminal compartment

Hand-Terminal
Robust grip

The special case system for decentralised electronics components.

• robust cases made of impact resistant, especially handy
• plenty of space for operating elements, displays and electronic components
• with closed operating area (I) or with frame cover for front panel insert (II)
• high protection class up to IP 65 in conjunction with the sealing kits (case, front panel)

IN-BOX
Industrial quality

As a terminal and electronic enclosure, the IN-BOX offers many different options.

• Plastic enclosure in 9 basic sizes and different heights
• Top part available in the enclosure colour and PC in transparent
• Rational stainless steel quick-action lock
• High impact strength IK07 (ABS) / IK08 (PC)
• High protection class IP66/IP67

Interface-Terminal
Interface professional

The INTERFACE-TERMINAL is predestined for data visualisation and additionally offers a maximum ease of use.

• the new interface between a stationary and a mobile component
  click here for a film (flash file)
• unique variety of applications: mobile, desk-top, wall mounted
• operating panel in vertical or horizontal orientation
• a lot of space for operating elements, graphic displays/touch screens (6.4" - 10.4") and electronic
• ergonomically designed for operating and reading off
• 3 sizes: S, M, L
• protection class up to IP 54: with sealings (accessories)
• available as assembly units for individual combinations
• New: installation assembly kit with elegant high-gloss design frame, individual colours and finish

Plug-Cases
Reliable contact

Universal and proven plug-case.

• plug versions correspond to the standards of the respective countries
• integrated socket for the German and French version
• flame retardant material according to UL94 V-0:
    live parts, socket case

Potting Boxes Duroplastic
For easy potting

Great variety of cases for encapsulating electronic assemblies.

• available in 15 sizes and different heights
• made of Duroplastic
• bottom lids as accessories

Potting Boxes Thermoplastic
For easy potting

Great variety of cases for encapsulating electronic assemblies.

• made of polyamide 6.6: available in 15 sizes< · versions with and without reinforcement in the corners
• made of ABS: available in 6 sizes

Railtec B
Locks onto DIN rails

Case system for quick locking assembly onto DIN-rails.

• 6 sizes following DIN 43880; NEW: version VI
• locking assembly onto rails according to DIN EN 60715 TH35
• transparent lid protecting display and operating elements
• possibilities for connecting terminals, PCB plug headers and front connectors
• locking clip preassembled in bottom part
• combination of several cases possible

Railtec C
Flexible outfit

New range of enclosures for DIN rail fixing as well as for dirct wall mounting.

• RAILTEC C: for terminals, PCB plug headers and front connectors
• RAILTEC CM: with integrated connection system, individually expandable
• RAILTEC CB: enclosures for plug headers, with push-on side walls
• RAILTEC CC: with integrated connection system, ideal for complete PCB inserting
• RAILTEC SUPPORT: modular design for individual components
• universal adapter for DIN rails

Robust-Box
Robust variety

Case series with universal possibility of use.

• 12 different basic dimensions with at least 2 heights
• for desk top and wall mounted use
• available in ABS and polycarbonate for some versions
• robust and sealed up to IP 66
• coding by coloured cover strips

SMART-BOX
Smart goes down well

Rounded surfaces create a pleasantly smarte appearance and underline the impressive qualities of the new range of cases SMART-BOX.

• high-quality material ABS (UL 94 V-0), flame-retardant and self-extinguishing
• available in 7 sizes
• folded trims allow invisible screw attachments
• cover retention device already included in the supply

Senso-Case
The way ahead

The first standard enclosure for ergonomically favourable single-handed operation. Ideal for specific measuring, controlling and recording of data.

• recessed control panel for membrane and silicone keyboards, pushbuttons and display modules
• simultaneous operation using standard/rechargeable batteries and cable possible, battery compartment as accessory
• cable strain relief (acc.) form an attractive connection
• with/without push-buttom

Shell-Type Cases
The system with 1001 possibilities

perfected case system for the universal use.

• available in 4 sizes, each in 3 heights
• 3 different case types:
    V: open front, closed rear
    O: front and rear open
    G: front and rear closed
• also with battery compartment or recessed operating area

Slide Control Knobs
Correctly regulated

Proven knobs for slide potentiometer.

• for mounting onto two different potentiometers
• different versions

Snaptec
IP 65 in a click

Various applications for this range in the fields of electric installation.

• top and bottom parts are assembled securely by a new snap-in-mechanism
• available in 3 sizes
• quick disassembly by unlocking
• easy wall mounting
• robust and sealed up to IP 65
• recessed operating area for membrane keyboards

Star-Knobs
Luminous Control

New tuning knob range, predestinated for the application of central user inerfaces.

• two installation versions (surface-mounted or flush-fitting)
• optional illumination with SMD LED technology possible
• ergonomic design: finger recess (lid), knurls and inclined body (knob)
• tried and tested collet fixture system (6 mm, 8 mm, 1/4")
• max. torque: assembly = 1.5 Nm, function = 1.2 Nm
• two sizes (33 and 41 mm)

Top-Knobs
Designer knobs

Homogenous tuning knobs with a modern design.

• with lateral screw fixing for:
  4 mm, 6 mm, 1/4" and flattened axes
• available in 5 sizes from 16-40 mm diameter
• 5 different and individually interchangeable marking elements
• IF award 1996 decorated

Tuning Knobs lateral screw fixing
Large selection of types

Proven tuning knobs for electromechanical rotary potentiometers.

• with lateral screw fixing
• different versions

Vario-Box
Easily adaptable

The case system with many variation possibilities.

• for table top and wall mounted applications (hidden wall mounting)
• available as components or as complete kit
• protection class IP 65 with cover
• protection class IP 64 with front frame or frame cover
• protection class IP 54 if closed with front panel
• many accessories: tilt feet, handle, lock, etc.

Walltec
Measuring, controlling, regulating

Range of wall-mounted cases with freely accessible terminal compartment, practical for mounting and connection work.

• available in 5 sizes
• also available with transparent enclosure cover (left-hand or right-hand hinge)
• alternatively available for front lid / front panel attachement (accessory)
• fastening pillars and guide grooves for vertical and horizontal installation of printed circuit boards
• up to protection class IP 65 (with transparent enclosure cover)